锑化镓的光助微刻蚀及其表面氧化物的研究

用电化学和光电化学方法研究锑化镓表面的腐蚀以及锑化镓表面氧化膜的生成和溶解，锑化镓电极在一定电势下生成的氧化膜，用俄歇能谱证明，其主要成分为难溶的氧化锑，此氧化膜的存在抑制了锑化镓的进一步腐蚀，同时亦使锑化镓的半导体光电化学性能大为减弱，通过激光微刻蚀及电子显微镜的观察，在刻蚀剂中添加酒石酸，柠檬酸和氢氟酸等试剂，可使刻蚀形得改善，实验研究了锑化镓的平带电势的测定。     

MH—Ni电池封口化成及其性能

在硼氢化钾碱性溶液中对金属氢化物（ＭＨ）电极的表面进行化学还原处理，提高了ＭＨ电极的放电容量、活化性能和电催化活性．用其为负极组装的ＡＡ型ＭＨ－Ｎｉ电池进行了封口化成，电池放电容量达到１１５０ｍＡｈ，５Ｃ下电池的放电容量达到０．２Ｃ下容量的８０％以上，电池在１Ｃ１００％ＤＯＤ（放电深度）充放电条件下，循环寿命由原来的１００次左右提高到２００次以上     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

A study of the formation of silica-supported mixed magnesium-manganese spinel oxides from multicomponent gels

The effects of thermal treatment on composite materials prepared by the gelation of sols comprising large concentrations of metal oxide precursor salts have been investigated, in order to determine the compositional and thermal requirements for forming spinel magnesium manganates in such systems. The preparative technique has been found to give rise to derived gel materials in which the metal oxide phase, in the form of regular spherical particles, is dispersed throughout a continuous silica matrix. Silica-supported mixed magnesium and manganese spinel oxide phases were obtained for systems comprising at least 30 wt% metal nitrate after heating to temperatures between 700 and 850°C, but not without concomitant formation of Mn₂O₃ and modification of the silica network by magnesium.     

Sol Gel Processing of Low Permittivity,Fiber-Reinforced SiO2-Polyimide Substrates

Low permittivity ceramic substrates with a sandwich structure consisting of a porous, fiber-reinforced SiO₂ core and two thin polymer plates were fabricated by sol-gel processing, and polymer infiltration. The rheological behavior of an aqueous colloidal SiO₂ sol, containing short SiO₂ fibers was studied as a function of particle loading, fiber loading and gelation time. Short SiO₂ fibers were introduced to limit drying shrinkage and thus minimize substrate cracking during drying. After the psuedoplastic sol was tape cast and sintered at 1150°C for 2 h, a polyimide solution was infiltrated into the porous SiO₂ core. Permittivities ranging from 1.81 to 3.08 could be obtained by using 32–42% SiO₂, 5–50% polyimide and 63 to 8% porosity. The substrate strength was increased from 1.93 MPa to 3.83 MPa after polyimide infiltration.     

纳米CoHCF修饰电极的制备及其对血红蛋白的电化学测定研究

A cobalt hexacyanoferrate （CoHCF） nanoparticle （size ca. 60 nm） chemically modified electrode （CME） was fabricated and the electrochemical behavior of hemoglobin （Hb） at this nanosized CoHCF CME was studied. In comparison with a bare glassy carbon electrode （GCE） and a general CoHCF CME electrodeposited in a traditional manner, the present nanosized CoHCF CME performed efficiently electrocatalytic reduction for Hb with relatively high sensitivity, stability, and longlife, Combined with liquid chromatography （LC）, the nanosized CoHCF CME was used as the electrochemical detector of Hb in the established flow injection analysis-electrochemical determination （FIA-ECD） system. The peak current was a linear function of concentrations in the range from 2.5×10^-8 to 5.0×10^-6mol/L for Hb, with detection limit of 1.4×10^-8 mol/L. The FIA-ECD system has been successfully applied to assess the Hb content of clinic blood samples with advantages of sensitiveness, speediness, easy control and small sample-consumption.     

Determination of dopamine in synthetic cerebrospinal fluid by SWV with a graphite–polyurethane composite electrode

This work describes an electroanalytical investigation of dopamine using cyclic voltammetry (CV) and the graphite–polyurethane composite electrode (GPU). In CV studies, well-defined redox peaks characterize the oxidation process at the GPU electrode, which is indicative of electrocatalytic effects associated with active sites on the GPU electrode surface. A new analytical methodology was developed using the GPU electrode and square wave voltammetry (SWV) in BR buffer solution (0.1 mol L^–1; pH 7.4). Analytical curves were constructed under optimized conditions (f=60s^–1, E_a=50 mV, E_I=2 mV) and detection and quantification limits of 6.4×10^–8 mol L^–1 (12.1 g L^–1) and 5.2×10^–6 mol L^–1 (0.9 mg L^–1), respectively, were achieved. The precision of the method was checked by performing ten successive measurements for a 9.9×10^–6 mol L^–1 dopamine solution. For intra-assay and inter-assay precisions, the relative standard deviations were 1.9 and 2.3%, respectively. In order to evaluate the developed methodology, the determination of dopamine was performed with good sensitivity and selectivity, without the interference of ascorbic acid in synthetic cerebrospinal fluid, which indicates that the new methodology enables reliable analysis of dopamine.     

碱性溶液中金电极上氧还原中间物研究

应用改进了的旋转全电极上的电势阶跃计时库仑法,分别测定了不同电极电势下氧还原过程中电极吸附中间物和溶解中间物氧化所需的电量,实验证明,在此过程中电极上确有吸附中间物存在,而且是电极电势的函数,但其分子属性尚需进一步鉴别。     

Mass transfer to horizontal gas-generating electrodes

Mass transfer to a horizontal electrode during electrolytic evolution of oxygen and hydrogen at current densities of 100 to 10 000 A/m² is studied. The mass transfer intensity is evaluated from the diffusion layer thickness, which varies from 60 to 5 μm at such current densities. Calculations show that the decrease in the diffusion layer thickness is due to bubbles with a stationary interphase surface crossing the diffusion layer. During the hydrogen evolution, the diffusion layer thickness is nearly the same for vertical and horizontal electrodes. During the oxygen evolution, the diffusion layer is much thinner for a horizontal electrode. Additional decrease of the diffusion layer thickness during the evolution of oxygen is associated with the lesser solution density in the near-electrode layer and with its transport away by means of natural convection.