Electroless preparation and electrochemical behavior of a platinum-doped nickel hexacyanoferrate film–zinc modified electrode: catalytic ability of the electrode for electrooxidation of methanol

The use of a zinc substrate as an electrode and the modification of its surface by means of a thin film of platinum-doped nickel hexacyanoferrate (Pt-NiHCF) were developed. The modification conditions of the zinc surface including the electroless deposition of metallic nickel on the electrode surface from NiCl₂ solution, chemical derivatization of the deposited nickel to the NiHCF film in 0.5 M K₃[Fe(CN)₆] solution, and electrochemical penetration of metallic platinum into the modified film are described. The modified zinc electrodes prepared under optimum conditions show a well-defined redox couple due to the [Ni^IIFe^III/II(CN)₆]^1–/2– system. The effects of pH, the alkali metal cation, and the anion of the supporting electrolyte on the electrochemical characteristics of the modified electrode were studied in detail. The diffusion coefficients of hydrated alkali metal cations in the film (D), the transfer coefficient (), and the transfer rate constant for the electron (k_s) were calculated in the presence of some alkali metal cations. The electrocatalytic activity of the modified electrode for methanol oxidation was demonstrated. The stability of the modified electrode under various experimental conditions was investigated.     

Classification of white wine aromas with an electronic nose

This paper reports the use of a tin dioxide multisensor array based electronic nose for recognition of 29 typical aromas in white wine. Headspace technique has been used to extract aroma of the wine. Multivariate analysis, including principal component analysis (PCA) as well as probabilistic neural networks (PNNs), has been used to identify the main aroma added to the wine. The results showed that in spite of the strong influence of ethanol and other majority compounds of wine, the system could discriminate correctly the aromatic compounds added to the wine with a minimum accuracy of 97.2%.     

多嵌段聚醚氨酯脲为基质的新型高分子固态离子导体

本文合成了一系列聚乙二醇型多嵌段聚醚氨酯脲，而且用这类聚醚氨酯甩与高氯酸锂制得了一种新型的高分子固态离子导体复合物。在室温和50℃之间，其电导率比聚环氧乙烷为基质的固体电解质的高一到二个数量级，它还具有优良的综合性能。因此，对于室温薄膜蓄电池来说，这种新型的固体电解质是一类良好的候选材料。     

医用聚氯乙烯膜的等离子体表面改性

用两种不同气氛的辉光放电等离子体工艺对医用软质聚氯乙烯（ＰＶＣ）膜进行了表面改性研究。结果表明，聚合性气氛的等离子体改性效果明显优于非聚合性气氛。平整致密的聚合膜对ＰＶＣ增塑剂——邻苯二甲酸二辛酯的迁移和扩散起了阻挡作用，也使膜表面亲水性和表面张力极性成份增大，液固相界面张力减小，生物相容性得以改善。     

Sonoelectroanalysis: investigation of bismuth-film-modified glassy carbon electrodes

Bismuth-modified glassy carbon electrodes have been investigated for their suitability in sonoelectroanalysis. The stability of the bismuth film to the application of ultrasound was assessed via voltammetric and atomic force microscopy (AFM) studies which revealed little ablation at powers up to an intensity of 130 W cm^–2 delivered from a 25-kHz sonic horn. Furthermore, bismuth-film-modified glassy carbon electrodes were evaluated for the sonoelectroanalytical quantification of zinc and cadmium. Detection limits of 2×10^–7 M and 6×10^–9 M respectively were found after a 60-s deposition time via an acoustically assisted deposition protocol.     

Processing and characterization of Pb(Mg,Nb)O3-PbTiO3 thin films from metal alkoxide-derived gels

The sol-gel processing is one of promising methods to fabricate well-derived integrated thin films at relatively low temperature. Ferroelectric niobates films do afford the possibilities for adding the values by the hybridization with semiconductor and/or electro-optic systems. The molecular level designing of the precursor solution was stressed as well as the control of key processing factors. The advantages of this sol-gel have been extended to prepare the ferroelectric Pb(Mg, Nb)O₃-PbTiO₃ solid solution films integrated on Si wafers. The crystallization of the films with desired crystal structure could be promoted by the controlled partial hydrolysis of designed alkoxide solution in the intermediate state and the pre-heated treatment of alkoxide-derived films in flow of water vapor and oxygen gas mixture.     

二维光学薄膜的气敏反射光谱特性

研究二维光学薄膜ＳｎＯ２：ＴｉＯ２在乙醇、丙酮、氨蒸汽中的气敏反射光谱，发现它与厚膜（膜厚２０μｍ）的气敏反射光谱有明显的差异，它的反射光强在气体浓度较低时随气体浓度增加而增强，气体浓度较高时则现象相反，并且它的反射峰会发生位移。利用不同气体的反射峰的气敏特性，可制成有气体选择性的气敏光纤传感器。     

甲基丙烯酸缩水甘油酯/苯乙烯固相接枝聚丙烯

以苯乙烯(St)为共单体，过氧化苯甲酰(BPO)为引发剂，采用固相接枝反应将甲基丙烯酸缩水甘油酯(GMA)接枝到聚丙烯(PP)大分子链上。研究了反应时间、单体用量、引发剂用量等因素对接枝率的影响。采用凝胶渗透色谱(GPE)测定了PP和接枝物PP-g-(GMA-St)的分子量和分子量分布。结果 表明固相接枝PP反应条件为[GMA／[St]=2，反应3．5h，加入GMA 10份，BPO 5份。St的加入有助于GMA与PP的接枝，同时在一定程度上抑制了PP的降解。     

Effect of the protonation level of poly(o-phenylenediamine) (PoPD) on the ac impedance of humidity-sensitive PoPD/poly(vinyl alcohol) composite film

A composite film consisting of poly(o-phenylenediamine) (PoPD) and poly(vinyl alcohol) (PVA) has been prepared, and the effect of the protonation level of PoPD on the response of the composite to humidity been investigated by ac impedance measurements. The electrochemical system of the PoPD/PVA composite in a humid atmosphere is represented by an electrochemical equivalent circuit containing film (R_film, C_film), Warburg (W) and interfacial (R_ct, C_dl) impedance. R_film was increased with decreasing protonation level of the PoPD in relative humidity regions higher than 40%, but it was almost independent of the protonation level in humidity regions lower than this percentage.     

Influence of isotacticity and molecular weight on the properties of metallocenic isotactic polypropylene

The relationships between structure and properties have been established for isotactic polypropylene, iPP, homopolymers synthesized by metallocene catalyst systems. These iPPs exhibit different isotacticity degrees and molecular weights, and several thermal treatments during their processing have been applied. The most important factor affecting the structure and properties of these polymers is the isotacticity content. The thermal treatment, i.e., the rate of cooling from the melt, is also important and a clear molecular weight effect has been also found for the sample with lowest M_w. These factors affect the thermal properties, the degree of crystallinity and, therefore, the structural parameters and the viscoelastic behavior. A slow cooling from melt favors the formation of the γ phase instead of the α modification. The storage modulus, Young modulus and microhardness values increase as crystallinity does, independently of the origin of this increase: higher isotacticity or application of a slow crystallization from the melt.