A PMMA composite as an optical diffuser in a liquid crystal display backlighting unit (BLU)

The effect of thermo-physical properties, relative humidity and stiffness on the warpage of a poly(methyl methacrylate) (PMMA) diffusing plate modified with glass fibers in a direct-lit backlight unit (BLU) of a liquid crystal display (LCD) was investigated. The warpage of the PMMA diffusing composites modified with a glass fiber were significantly reduced relative to that of a conventional PMMA diffusing plate. Luminance and scattering characteristics of the PMMA diffusing composites having 5, 10, 20 vol% of glass fibers were measured. Although the luminance of the composite was lowered as increasing the volume fractions of glass fibers in the PMMA composites, good brightness uniformity of the composites on a light source was obtained.     

Gelation in free-radical terpolymerization of poly(allyl methacrylate) crosslinked polymer nanosphere with allyl benzoate and vinyl benzoate

Microgel-like poly(allyl methacrylate) (PAMA nanosphere) was prepared by the emulsion polymerization of AMA as the reactive crosslinked polymer nanosphere with abundant pendant allyl groups. The terpolymerization of PAMA nanosphere with allyl benzoate (ABz) and vinyl benzoate (VBz) was conducted in bulk using benzoyl peroxide as initiator at 80 °C. The gelation depended on the feed ABz/VBz molar ratio since the molecular weights of resulting poly(ABz-co-VBz)s that act as the bridges increased with an increase in the mole fraction of VBz in the feed monomer. Beyond the gel point, the sol was rapidly incorporated into the gel and the increasing tendency of the gel fraction became steeper from 70 to 95 mol% of VBz as a reflection of increased chain length of bridge between PAMA nanospheres. Moreover, the swelling ratio became lower with increasing the mole percentage of VBz in the feed monomer. These results would support the preferential incorporation of PAMA nanosphere into the gel and the longer bridge can capture more nanospheres to give a much shrunken gel.     

STUDY ON FLUORESCENCE BEHAVIOUR OF EU~(3+) CONTAINING POLY(METHYL METHACRYLATE)

Fluorimetry has been used to characterize ionomers synthesized by copolymerization ofmethyl mehacrylate, methacrylic acid and europium methacrylate (EMA). Under excita-tion of UV light at 375 nm no seif-quenching was found in fluorescence of EMA containingionomers at 615nm within the concentration range of 1.6×10~(-2) to 11.49×10~(-2) mol%.This means that the distance between two Eu~(3+) ions is larger than 5nm. In the sameconcentration range seif-quenching took place in europium octanoate (EOA) containingpoly(methyl methacrylate) in which EOA was doped as an additive.     

Surface characterization of macroporous glycidyl methacrylate based copolymers by inverse gas chromatography

Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), PGME, with different porosity parameters were synthesized by suspension copolymerization and modified by ring-opening reaction of the pendant epoxy groups with ethylene diamine, EDA. Inverse gas chromatography at infinite dilution was used for the determination of adsorption properties of PGME, and copolymer modified with ethylene diamine, PGME-en. Thermodynamic parameters of adsorption, dispersive components of the surface free energies, and the acid/base constants for the copolymer samples were calculated. The calculated dispersive surface energy values, , for PGME and PGME-en are comparable with the literature data for nonconductive polymers.     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

A comparison between the SBR vulcanizates reinforced by magnesium methacrylate added directly or prepared in situ

The styrene-butadiene rubber (SBR) cured by dicumyl peroxide was reinforced by magnesium methacrylate [Mg(MAA)₂], which was added into SBR directly or prepared in situ in SBR through the neutralization of magnesium oxide (MgO) and methacrylic acid (MAA). The experimental results show that the SBR vulcanizates reinforced by Mg(MAA)₂ prepared in situ have better mechanical properties than those reinforced by Mg(MAA)₂ added directly. The SBR vulcanizates with Mg(MAA)₂ prepared in situ are semi-transparent, but those with Mg(MAA)₂ added directly are opaque. The Fourier transform infrared analysis shows that the polymerization conversion of Mg(MAA)₂ in the SBR vulcanizates with Mg(MAA)₂ prepared in situ is much higher than that in the SBR vulcanizates with Mg(MAA)₂ added directly. The scan probe microscopy photographs show that the particles in the SBR vulcanizates with Mg(MAA)₂ prepared in situ are much finer and disperse more evenly than that in the SBR vulcanizates with Mg(MAA)₂ added directly.     

Dispersion polymerization of methyl methacrylate: Mechanism of particle formation

The mechanism for the formation of micron-size polymer particles in the dispersion polymerization of methyl methacrylate was investigated by applying dynamic light scattering to monitor the evolution of the average particle size in the early stages of the polymerization. In addition, the contributions of physically adsorbed stabilizer and graft copolymer were evaluated by measuring the bound, unbound (adsorbed), and free stabilizer, and by determining the amount of added stabilizer required in seeded dispersion polymerizations. Twenty nanometer particles (termed nuclei) were the smallest particles detected and are considered to be formed by aggregation of growing polymer chains precipitating from solution as they exceed their critical chain length. Aggregation of these nuclei with themselves and their aggregates continues until mature and stable particles are formed. This occurs when sufficient stabilizer occupies the particle surface which includes both the polymeric stabilizer [poly(vinylpyrrolidone)] and its graft copolymer which is created in situ. The effects of process variables are discussed based on this mechanistic picture of the dispersion polymerization process. © 1994 John Wiley & Sons, Inc.     

Kinetics and mechanism of the grafting of 2-(dimethylamino)ethyl methacrylate onto hydrocarbon substrates

The kinetics of grafting a basic monomer, 2-(dimethylamino)-ethyl methacrylate (DMAEMA) to hydrocarbon substrates have been investigated. These systems were chosen as models for the grafting of a homopolymerizable monomer to polyolefins such as polyethylene. The reactions with squalane and n-eicosane were initiated by an organic peroxide, 2,5-dimethyl 2,5 dit-butylperoxy)-3-hexyne; grafting yields become significant at high reaction temperatures and low monomer concentrations. In squalane, the order of reaction with respect to monomer increased from about 1.1 for 0.22?0.44M DMAEMA to almost 2 at 0.69M DMAEMA; the order with respect to initiator was 0.56. The overall activation energy in the 130?160°C temperature range was, however, surprisingly low, 42±5 kJ mol^?1. When analytical data were used to separate the overall rate into those for grafting and homopolymerization, different kinetic paths were observed for the competing reactions. These results are interpreted in terms of two different mechanisms; intramolecular chain transfer plays an important role in grafting, while depropagation becomes a major factor in homopolymerization at temperatures above 150°C. © 1995 John Wiley & Sons, Inc.     

由两种单体借助酯交换反应制备三元共聚物

本文讨论了甲基丙烯酸羟乙酯和甲基丙烯酸在乙醇中进行溶液聚合时,借助酯交换反应,在该亲水体系中引入第三疏水组分,从而制备三元共聚物的可行性.