Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

Controlled alternating copolymerization of St with MAh in the presence of DBTTC

The copolymerization of styrene (St) with maleic anhydride (MAh) performed at 22 °C in the presence of dibenzyl trithiocarbonate exhibits controlled nature evidenced by: narrow molecular weight distribution, controlled molecular weight and first-order polymerization kinetics. The composition analysis of the copolymers obtained by ¹³C NMR spectra shows the molar fraction of St in obtained copolymers is almost equal to 0.5 throughout the copolymerization. The sequence structure of the copolymer was obtained from DEPT experiments by recording the spectra at π/4 and 3π/4, and then combining them together, the results showed that the copolymers obtained possessed well-defined alternating structure. The experiment shows that charge-transfer-complex formed from St and MAh participates in both initiation and chain growth throughout the copolymerization.     

（H2O）^＋n（n=1,2）的几何结构优化和振动光谱分析

采用Ｈａｒｔｒｅｅ－Ｆｏｃｋ和ＭＰ２方法在多种水平下优化了（Ｈ２Ｏ）＾＋ｎ（ｎ ＝１，２）的几何结构，并进行了振动光谱分析。结果表明：对（Ｈ２Ｏ）＾＋采用ＭＰ２／６－３１１＋＋Ｇ（ｄ，ｐ）可得出最满意的结论。     

反相乳液聚合制备壳聚糖接枝共聚物及应用

以壳聚糖、丙烯酰胺、甲基丙烯酰氧乙基三甲基氯化铵为原料,硝酸铈铵为引发剂,Span-20为乳化剂,通过反相乳液聚合技术,合成壳聚糖阳离子接枝共聚物。分析讨论了乳化剂用量、引发剂浓度、油水体积比、单体配比、反应时间、反应温度对共聚物接枝率的影响,并采用正交试验方法对合成条件进行了优化。研究了其对重金属离子Cu2 、Cd2 、Zn2 的吸附性能。结果表明,在Cu2 、Cd2 、Zn2 的混合离子体系中,该共聚物对Cu2 、Zn2 有选择性吸附。     

Optimization of the Synthesis of 2,6–Dinitro-4-trifluoromethylphenyl Ether Substituted Cyclodextrin Bonded Chiral Stationary Phases

The comparisons of five different chiral stationary phases (CSPs) based on 2,6-dinitro-4-trifluoromethylphenyl (DNP-TFM) ether substituted β-cyclodextrin are presented. The five CSPs differ from each other in the linkage/spacer chemistry, or on the position of the substituents on β-cyclodextrin, or in the sequence of the synthetic procedure. The results show that there are two optimum combinations: (1) DNP-TFM randomly substituted on the β-cyclodextrin as the chiral selector along with a carbamate linkage chain bonding it to the silica support; and (2) β-cyclodextrin derivatized by DNP-TFM substituents only on the C-2 and C-3 positions of the cyclodextrin with an ether linkage chain anchoring it to the silica gel. These two combinations show complementary separations for some enantiomers. The spacer chain effect is much more pronounced for the CSP based on the β-cyclodextrin derivatives with DNP-TFM substituents only on C-2 and C-3 positions than its randomly substituted counterpart. The sequence of derivatizing the cyclodextrin and attaching it to silica gel also affects its selectivity and efficiency. The β-cyclodextrin should be derivatized before it is linked to the silica gel.     

分散固相萃取结合气相色谱-高分辨质谱快速筛查酱油中多种氯丙醇

建立了酱油中1，3-二氯-2-丙醇、2，3-二氯-1-丙醇、3-氯-1，2-丙二醇和2-氯-1，3-丙二醇的分散固相萃取-气相色谱-高分辨质谱快速筛查检测方法。样品采用乙酸乙酯提取，提取液浓缩后经N-丙基乙二胺净化，气相色谱-高分辨质谱测定，内标法定量。结果表明，该方法对于酱油中4种氯丙醇的定量限为0.5~10 μg/kg。在3个浓度水平下的加标回收率为78%~103%；相对标准偏差均不大于8.8%。该方法快速、简便、准确、灵敏，可作为酱油中4种氯丙醇的有效检测方法。     

Nitroxide mediated living radical polymerization of styrene onto poly (vinyl chloride)

Nitroxide‐mediated ‘living’ free radical polymerisation (LREP) was employed for the first time to prepare graft copolymer by having arylated poly (vinyl chloride) (PVC‐Ph) as a backbone and polystyrene (PS) as branches. The graft copolymerization of styrene was initiated by arylated PVC carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) groups as a macroinitiator. Thus, the arylated PVC was prepared in the mild conditions and these reaction conditions could overcome the problem of gelation and crosslinking in polymers. Then, 1‐hydroxy TEMPO was synthesized by the reduction of TEMPO with sodium ascorbate. This functional nitroxyl compound was coupled with brominated arylated PVC (PVC‐Ph‐Br). The resulting macro‐initiator (PVC‐Ph‐TEMPO) for ‘living’ free radical polymerization was then heated in the presence of styrene to form graft copolymer. DSC, GPC, ¹HNMR, and FT‐IR spectroscopy were employed to investigate the structure of the polymers. Copyright © 2007 John Wiley & Sons, Ltd.     

Chiral separations by capillary electromigration techniques in nonaqueous media. II. Enantioselective nonaqueous capillary electrochromatography

A review on the advantages, peculiarities, and the potential of enantioselective capillary electrochromatography (CEC) in nonaqueous media is presented. Some fundamentals on CEC with particular focus on enantioselective CEC are discussed. The strategies, concepts, preferentially utilized chiral selectors and column technologies that have been utilized to succeed in highly efficient enantiomer separations by nonaqueous CEC are described thoroughly.     

Composting of urban solid residues (USR) by different dispositions

The thermal behavior and non-isothermal kinetics of thermal decomposition of three different kinds of composting of the USR like: stack with drilled PVC tubes (ST), revolved stack (SR) and stack with material of structure (SM), from the usine of composing of Araraquara city, Săo Paulo state, Brazil, within a period of 132 days of composting were studied. Results from TG, DTG and DSC curves obtained on inert atmosphere indicated that the cellulosic fraction present, despite the slow degradation during the composting process, is thermally less stable than other substances originated from that process. Due to that behavior, the cellulosic fraction decomposition could be kinetically evaluated through non-isothermal methods of analysis. The values obtained were: average activation energy, Ea=248, 257 and 259 kJ mol^-1 and pre- exponential factor, logA=21.4, 22.5, 22.7 min^-1, to the ST, SR and SM, respectively. From Ea and logA values and DSC curves, Málek procedure could be applied, suggesting that the SB (Šesták-Berggren) kinetic model is the appropriated one to the first thermal decomposition step. This revised version was published online in July 2006 with corrections to the Cover Date.