Physical ageing in poly(vinyl acetate) 1. Enthalpy relaxation

The enthalpy changes ΔH_∞ between a poly(vinyl acetate) glass formed by rapid cooling and the corresponding fully relaxed glass have been estimated at four temperatures below the glass transition. The values obtained were different to those expected by extrapolating liquid behavior below the glass transition and were found to agree well with the predictions of a simple expression for the combined main chain conformational and free volume contributions to enthalpy. Conformational contributions from the side chain alone were also considered but were not required to obtain agreement with experiment. It can be concluded that the side chains remained mobile below the glass transition and do not contribute to the heat capacity discontinuity at T_g. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1107–1116, 1997     

Water-protein and ligand-protein interactions as determined by selective NMR relaxation studies

Water-macromolecules and ligand-macromolecules interactions were investigated considering the effects induced by the presence of a macromolecule on both the water and the ligand NMR selective (R₁^SE) and non-selective (R₁^NS) spin-lattice relaxation rates. The results obtained from the solvent studies were used to describe the solvent dynamics at the macromolecule-solvent interface. On the other hand, ligand R₁^SE and (R₁^NS) analysis allowed the definition of the “affinity index”, [A]_L^T, an index related to the extent of the macromolecule-ligand recognition process.     

Application of a kinematic hardening viscoplasticity model with thresholds to the residual stress relaxation

The life analysis of engine components needs to take into account the residual stress relaxation induced by cyclic service loads. The paper recalls a new class of constitutive equations for cyclic viscoplasticity, using a series of kinematic hardening models with thresholds. The equations are introduced within a recently enlarged thermodynamic framework. Some attention is focused to the relations with multisurface approaches and to a specific determination procedure of the model parameters. The new model is applied to the calculation of the near surface residual stress relaxation after shot peening, when the structure is submitted to cyclic service loads. The simulated stabilized residual stresses are in good accordance with experimental results obtained on an N18 disk alloy at 650°C. In comparison, the classical model without threshold predicts the complete vanishing of the residual stresses, which is not satisfactory.     

Unimolecular micelles: Synthesis and characterization of amphiphilic polymer systems

Unimolecular micelles were successfully synthesized from mucic acid, fatty acids, and poly(ethylene glycols) to create biocompatible polymers. These polymers consist of a core‐shell structure that resembles conventional micellar structures but with significant thermodynamic stability in aqueous media. The core of the polymers provide a hydrophobic environment for drug encapsulation via hydrophobic interactions, whereas the shell provides excellent water solubility. The polymers were characterized by nuclear magnetic resonance, infrared and mass spectroscopies, as well as gel permeation chromatography, differential scanning calorimetry, and thermogravimetric and elemental analyses. Encapsulation ability was measured using high‐pressure liquid chromatography to monitor lidocaine, a hydrophobic molecule. Encapsulation capabilities increased as lipophilicity of the core increased. To verify that encapsulation was caused by individual unimolecular micelles, surface tension and dynamic light scattering measurements were performed. The results indicated that these unimolecular micelles have great potential as drug carriers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 703–711, 1999     

Rouse's dynamics of networks with pendant chains

A model to describe the dynamics of networks with linear pendant chains has been formulated based on the properties of ensembles of micronetworks, using the Rouse model. This development indicates that the terminal relaxation time of pendant chains with relatively large molecular weight scales with the square of the molecular weight of those chains. On the other hand, when the molecular weight of pendant and elastically active chains are comparable, a nearly exponential growth of the terminal relaxation time with the molecular weight is predicted. The main predictions of the model are compared with experimental results of model poly(dimethyl siloxane) (PDMS) networks, with controlled amounts of linear pendant chains of known molecular weight. The terminal relaxation time of these networks was estimated from the values of the loss modulus G″(ω) measured experimentally. An exponential dependence on the molecular weight of pendant chains was derived for the terminal relaxation time. This behavior is in good agreement with the predictions of our model for micronetworks, provided that the friction coefficient scales linearly with the number of entanglements. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1121–1130, 1999     

Pressure‐temperature study of dielectric relaxation of a polyurethane elastomer

The effect of hydrostatic pressure up to 1,361 atms on the dielectric properties of a segmented polyurethane elastomer (Dow 2103‐80AE) is studied at temperatures from 0°C to 80°C. The experimental results show that the relaxation time for both the I–process, associated with the molecular motions in the hard segments, and the α–process, associated with the glass transition, increases with pressure, and this shift is more pronounced for the I–process. Besides the glass transition, it is found that the I–process can be described by the Vogel–Fulcher (V–F) and Williams–Landel–Ferry (WLF) relations. At atmospheric pressure, T_g and T₀ for the I–process are 235.9 K and 4.2 × 10³ K, respectively. Based on the V–F and WLF relations and experimental results, it is found that a parameter, C₁, in the WLF relation is independent of the pressure. Thus, a method is introduced to determine the values of both the characteristic transition temperature (T_g) and activation energy (T₀) for the processes at different pressures. As the pressure increases from atmospheric to 1,361 atms, the increase of T_g for the I–process is about 30°C. The results also show that, for both the I– and the α–processes, T₀ decreases with increasing pressure. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 983–990, 1999     

Physicochemical characterization of chemical hydrogels based on PVA

In this paper, we report on the physicochemical characterization of hydrogels recently obtained by crosslinking poly (vinylalcohol), PVA, with telechelic PVA (telPVA, bearing terminal aldehydic groups) via acetalization in aqueous solution. These gels were studied by equilibrium swelling, compression modulus measurements, and proton relaxometry experiments. Swelling and compression modulus data allow to estimate the average molecular weight of PVA chain between crosslinks, the average mesh size of the networks, and the polymer–solvent interaction parameter χ₁. The average mesh size of PVA‐telPVA compares well with domain dimensions of diffusionally confined water as detected by NMR relaxometry. Proton relaxometry also showed different network domains in which water is compartmentalized, indicating a complex heterogeneity. The study of the temperature behavior of the nuclear spin–spin relaxation times of the confined water was also considered. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1225–1233, 1999     

Structure and dynamics of MG rubber studied by dynamic mechanical analysis and solid‐state NMR

Methyl‐methacrylate‐grafted natural rubber was prepared by free radical polymerization of methyl methacrylate in natural rubber latex, and their structure and dynamics were investigated by dynamic mechanical analysis and solid‐state nuclear magnetic resonance (NMR). Samples were prepared by chemical initiation and high‐energy radiation. The changes of glass transition temperature and tan δ max with different total poly(methyl methacrylate (PMMA) content are reported. The effect of the change in composition in copolymers on tan δ peak width, tan δ max, and area under the tan δ curve are used to understand the miscibility and damping properties. Solid‐state ¹³C‐NMR measurements were carried out to determine several relaxation time parameters, such as rotating frame and laboratory frame proton and carbon relaxation times. Cross polarization times and carbon relaxation times were interpreted based on the changes in the molecular motion. Proton relaxation times were interpreted based on the heterogeneity of the matrix. Results confirmed phase separation and a presence of an interfacial region. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1141–1153, 1999     

分散橙3掺杂聚合物薄膜的全光极化特性及其驰豫过程研究

利用旋涂法制备了分散橙3（DO3）/PMMA主客体掺杂薄膜,对其吸收谱、厚度和折射率进行了测量,并采用全光极化的方法对薄膜的二阶非线性光学特性进行了研究。实验结果表明,随着厚度的增加其二阶非线性先增强后减弱,d33最大值约为0.827×10-2pm/V。对极化饱和后的驰豫情况进行了分析,发现不同厚度薄膜的驰豫时间不同,这是由于薄膜中偶氮含量和厚度的不同,分子间的相互作用对顺反异构逆过程的快慢有较大的影响。