SYNTHESIS OF THE POLYSTYRENE-TYPE ADSORBENTS CONTAINING POLAR GROUPS AND THEIR CAPACITIES IN THE ADSORPTION OF STEVIOSIDE AND GYPENOSIDES

Seven polystyrene-type adsorbents (Ⅰ—Ⅶ) were synthesized by the modification of styrene-divinylbenzene copolymer respectively with hydroxymethyl, aminomethyl, methoxymethyl, phenoxymethyl, (4-hydroxy phenoxy)methyl, (4-acetylphenoxy)methyl, and acetyl groups. Their structures were characterized with chemical methods and physical techniques. The adsorption capacities of the adsorbents to stevioside and gypenosides were determined via batch test in which the HPLC method was used for the analysis of Saponin concentration of solution. The results showed that all the adsorbents could adsorb these saponins to a certain extent, but Ⅵ and Ⅶ had large capacities owing to their moderate polarities.     

Gas Phase Catalysis by Metal Nanoparticles in Nanoporous Alumina Membranes

Nanoporous alumina membranes, loaded with palladium and ruthenium nanoparticles of various size, were used for gas phase hydrogenation of 1, 3‐butadiene and for oxidation of carbon monoxide, respectively. Those membranes contain 10⁹ ‐ 10¹¹ pores per cm², all running perpendicular to the surface. Membrane discs of 20 mm in diameter and only 60 μm thick, incorporated in a reactor in which the reactants can be pumped in a closed circuit through the pores, turned out to very actively catalyze hydrogenation of butadiene (Pd) and oxidation of CO (Ru). The activity of the Pd catalysts depends characteristically on the particles size, the gas flow, and of the educts ratio. As could be expected, larger particles are less active than smaller ones, whereas increasing gas flows in case of hydrogenation accelerates the reactions. Excessive hydrogen reduces selectivity with respect to the various butenes, but favours formation of butane.     

相分离聚合法:(Ⅰ)羧酸型共聚功能微球的合成

粒径在微米级、粒度分布窄的高分子微球具有十分广泛的应用。但是由于这样规格的微球正是在一般的悬浮聚合和乳液聚合的合成范围之外,而采用二步聚合法和种子聚合法则不是需要使用特殊的反应装置,就是合成步聚十分繁复,因此至今对于这样规格高分子微球的报道不多。     

The use of 1H NMR microscopy to study proton-exchange membrane fuel cells.

To understand proton-exchange membrane fuel cells (PEMFCs) better, researchers have used several techniques to visualize their internal operation. This Concept outlines the advantages of using 1H NMR microscopy, that is, magnetic resonance imaging, to monitor the distribution of water in a working PEMFC. We describe what a PEMFC is, how it operates, and why monitoring water distribution in a fuel cell is important. We will focus on our experience in constructing PEMFCs, and demonstrate how 1H NMR microscopy is used to observe the water distribution throughout an operating hydrogen PEMFC. Research in this area is briefly reviewed, followed by some comments regarding challenges and anticipated future developments.     

Iodine-poly(2-vinylpyridine-co-styrene-co-divinylbenzene) charge transfer complexes with antibacterial activity

In this work, we have developed three different copolymers based on 2-vinylpyridine, styrene and crosslinked with divinylbenzene (10-30 mol%). The copolymers were morphologically and chemically characterized by apparent density, swelling degree, elemental analysis, Fourier transform infrared spectrophotometry and optical microscopy. The formation of iodine complexes with these copolymers was carried out by two different procedures: with solvent, or not. The influence of the copolymers structure on the capacity of anchoring iodine has been investigated. The antibacterial properties of polymeric charge transfer complexes were determined towards 10³-10⁷ cells/mL dilutions from the auxotrophic AB1157 Escherichia coli strain.     

An NMR study of methanol diffusion in polymer electrolyte fuel cell membranes

Methanol diffusion in two polymer electrolyte membranes, Nafion 117 and BPSH 40 (a 40% disulfonated wholly aromatic polyarylene ether sulfone), was measured using a modified pulsed field gradient NMR method. This method allowed for the diffusion coefficient of methanol within the membrane to be determined while immersed in a methanol solution of known concentration. A second set of gradient pulses suppressed the signal from the solvent in solution, thus allowing the methanol within the membrane to be monitored unambiguously. Over a methanol concentration range of 0.5–8 M, methanol diffusion coefficients in Nafion 117 were found to increase from 2.9 × 10⁻⁶ to 4.0 × 10⁻⁶ cm² s⁻¹. For BPSH 40, the diffusion coefficient dropped significantly over the same concentration range, from 7.7 × 10⁻⁶ to 2.5 × 10⁻⁶cm² s⁻¹. The difference in diffusion behavior is largely related to the amount of solvent sorbed by the membranes. Increasing the methanol concentration results in an increase in solvent uptake for Nafion 117, while BPSH 40 actually excludes the solvent at higher concentrations. In contrast, diffusion of methanol measured via permeability measurements (assuming a partition coefficient of 1) was lower (1.3 × 10⁻⁶ and 6.4 × 10⁻⁷ cm² s⁻¹ for Nafion 117 and BPSH 40 respectively) and showed no concentration dependence. The differences observed between the two techniques are related to the length scale over which diffusion is monitored and the partition coefficient, or solubility, of methanol in the membranes as a function of concentration. For the permeability measurements, this length is equal to the thickness of the membrane (178 and 132 μm for Nafion 117 and BPSH 40 respectively) whereas the NMR method observes diffusion over a length of approximately 4–8 μm. Regardless of the measurement technique, BPSH 40 is a greater barrier to methanol permeability at high methanol concentrations.     

Binding Aedes aegypti densonucleosis virus to ion exchange membranes

Experimental and numerical results for binding Aedes aegypti densonucleosis virus (AeDNV) using anion and cation exchange membranes are presented. AeDNV particles are adsorbed by anion and cation exchange membranes providing the virus particles and membranes are oppositely charged. Q membranes which are strongly basic anion exchangers were the most effective. Dynamic and static capacities for Q membranes were found to be similar. A numerical model is proposed which assumes a log normal pore size distribution. By estimating the required parameters from static binding experiments, the model may be used to calculate the breakthrough curve for virus adsorption.     

The interaction of double-charged metal ions with monolayers and bilayers of phospholipids

Electrophoretic mobilities of hexadecane/water emulsions containing dimyristoyl-phosphatidylcholine (DMPC) or egg yolk lecithin (EYL) monolayers at the interface and those of liposomes prepared from the same lipids were measured as functions of the concentrations of Ca²⁺, Mn²⁺, Cu²⁺, and Ni²⁺ cations in the aqueous phase. The surface potentials, surface charge densities (σ), and the Langmuir adsorption isotherms for various distances from the charged surface to the slip plane (d) were calculated on the basis of the Gouy-Chapman theory for 1∶2 electrolytes and the values of ζ-potentials. The binding constants (K) and parametersd were determined under the assumption that the maximum σ values correspond to one ion per phospholipid molecule at the interface. In the case of DMPC, the ion binding constants (L mol⁻¹) at 25°C are 230 and 87 for Ca²⁺, 31.5 and 21 for Mn²⁺, 11 and 6 for Cu²⁺, and 7.5 and 5.3 for Ni²⁺ in liposomes and emulsions, respectively. The affinities of Cu²⁺ and Ni²⁺ ions for EYL monolayers and bilayers are lower than those for DMPC mono- and bilayers. Thed parameters for all ions are smaller than the radii of the hydrated ions. In the case of Ca²⁺, Cu²⁺, and Ni²⁺, thed values for mono- and bilayers are different. The differences in K values between monolayers and bilayers as well as those between DMPC and EYL mono- and bilayers can be attributed to the differences in the local environment and orientation of the interfacial phosphate groups in these systems. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2490–2495, December, 1998.