Zirconium(IV)-porphyrins as novel ionophores for fluoride-selective polymeric membrane electrodes

The feasibility of using Zr(IV)-porphyrins as novel ionophores for preparing anion-selective polymeric membrane electrodes is examined. Electrodes constructed using o-nitrophenyl octyl ether plasticized poly(vinyl chloride) membranes containing Zr(IV)-octaethylporphyrin (OEP) dichloride (Zr(IV)[OEP]Cl₂) or Zr(IV)-tetraphenylporphyrin (TPP) dichloride (Zr(IV)[TPP]Cl₂) were found to exhibit enhanced potentiometric selectivity toward fluoride compared to electrodes based on a typical anion-exchanger (e.g. tridodecylmethylammonium chloride). At pH 5.5, the electrodes displayed the following selectivity sequences: ClO₄⁻ > SCN⁻ > I⁻ > F⁻ > NO₃⁻ > Br⁻ > NO₂⁻ > Cl⁻ and F⁻ > ClO₄⁻ > SCN⁻ > I⁻ > NO₂⁻ > NO₃⁻ > Br⁻ > Cl⁻ for membranes doped with Zr(IV)[OEP]Cl₂) and Zr(IV)[TPP]Cl₂, respectively. Both ionophores are shown to operate via a charged carrier mechanism, with 10 mol% of lipophilic tetraphenylborate derivative in the membrane phase required to achieve optimal selectivity. Electrodes prepared with both metalloporphyrin species display super-Nernstian response toward fluoride with slopes typically greater than −100 mV per decade. It is shown, via UV-VIS spectroscopy of the membrane phase, that this behavior occurs due to spontaneous formation of hydroxide ion bridged porphyrin dimers in the membrane in the presence of the lipophilic anionic additive. The dimers are easily converted to monomeric species upon increasing the concentration of fluoride in the sample solution. Decreasing the pH of sample buffer background solution (from pH 5.5 to pH 3) decreases the lower detection limit (DL) of the electrode response toward fluoride (by two-order of magnitude) and improves the electrodes’ selectivity.     

Metal Oxide Thin Films Containing Au Nano-Particles Prepared with Gas Diffusion Method

Au particles dispersed thin metal oxide films were prepared from precursor films containing HAuCl₄ with H₂S gas diffusion method. HAuCl₄ was uniformly dissolved in the films as promoted by hydroxypropyl cellulose (HPC). The mechanism of the Au particle formation was studied. It was found that HAuCl₄ was converted directly to Au metal particles upon contacting with H₂S gas. Au particles generated by this method were characterized with small particle size, sharp size distribution and high volume fraction in the films. The surface plasma resonance absorption of Au particles shifted to longer wavelength when TiO₂ component was introduced in the matrix.     

表面改性对CeO2纳米粉体特性的影响

研究了表面改性对CeO2纳米粉体特性的影响，采用表面活性剂．十二烷基硫酸钠对CeO2粉末颗粒表面进行了改性。未改性和改性的纳米氧化铈用粉体综合性能测试仪、激光粒度仪、比表面积测试仪、X射线仪、扫描电子显微镜进行了表征。结果表明，用十二烷基硫酸钠表面改性能提高纳米氧化铈的流动性和分散性，减小比表面积和团聚，同时也对CeO2粉体颗粒表面改性的机制进行了探讨。     

Synthesis of nanosized TiO2/SiO2 particles using microwave processes and their photocatalytic activity on the decomposition of orange II

The nanosized titania and TiO₂/SiO₂ particles were prepared by the microwave-hydrothermal method. The effect of physical properties TTIP/TEOS ratio and calcination temperature has been investigated. The major phase of the pure TiO₂ particle is of the anatase structure, and a rutile peak was observed above 800°C. In TiO₂/SiO₂ particles, however, no significant rutile phase was observed, although the calcination temperature was 900°C. No peaks for the silica crystal phase were observed at either silica/titania ratio. The crystallite size of TiO₂/SiO₂ particles decreases as compared to pure TiO₂ at high calcination temperatures. The TiO₂/SiO₂ particles show higher activity on the photocatalytic decomposition of orange II as compared to pure TiO₂ particles.     

Sedimentation equilibrium of suspensions of colloidal particles at finite concentrations

Equilibrium concentration profiles of non-dilute colloidal suspensions are calculated by means of the Carnahan-Starling expression for the osmotic compressibility of hard sphere liquids. The profiles depend on the average volume fraction of the suspension, , and on the field interaction parameter, ₀ (reciprocal of the Péclet number at infinite dilution). Profiles are computed for values of and ₀ typical of those encountered in sedimentation field-flow fractionation experiments. It is found that, in most cases, the volume fraction at the depletion wall is negligibly small and that the volume fraction at the accumulation wall ₀, depends on the ratio <>₀/₀ only. An inflexion point is found in the concentration profile if ₀ is larger than 0.13 whatever the value of ₀.     

Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

基于SnO2为修饰层的Au-Pt / SnO2 / Au复合电极研究

用真空镀膜法在Au电极上沉积SnO₂薄膜，在HAuCl₄和H₂PtCl₄的混合溶液中利用直接还原法，将Au-Pt双金属纳米颗粒组装在SnO₂ / Au电极上，得到Au-Pt / SnO₂ / Au复合电极。采用SEM、TEM、XPS及CV曲线测定对Au-Pt / SnO₂ / Au复合电极进行了表征。结果表明:复合电极上双金属纳米颗粒分布均匀，粒子粒径约为25 nm左右。SnO₂作为修饰层以配位键与双金属纳米粒子结合。Au-Pt / SnO₂ / Au复合电极具有良好对甲醇氧化的电化学性能。     

Packed capillary column supercritical fluid chromatography of fat-soluble vitamins using liquid crystal polysiloxane coated particles

Summary Liquid crystal polysiloxane stationary phases were prepared by coating two different polymers on deactivated porous silica particles (10 m diameter, 80 Å pores). Deactivation of the silica particles before coating was necessary to prepare highly efficient and inert stationary phases for supercritical fluid chromatography (SFC). Fat-soluble vitamins E, A, K₁, K₂, D₂, and D₃ were separated on these columns using neat supercritical CO₂ as mobile phase. The analyses were completed within 40 min at 70 °C. The results were compared to those obtained using a capillary column packed with less ordered liquid crystalm,m-cyanobiphenyl-substituted polysiloxane coated particles. Reduced shape selectivity was observed with this cyanobiphenyl phase. The response factors of vitamins A, E, K₁, K₂, D₂, and D₃ when using the flame ionization detector (FID) were determined to be very similar.     

Flow‐Injection Amperometric Detection with Solvent Polymeric Membrane Ion Sensors

An amperometric detector for hydrophobic ions based on a plasticized poly(vinyl) chloride (PVC) membrane incorporated in a flow‐injection system was developed. A four‐electrode potentiostat with ohmic drop compensation was used, while a flow‐through cell incorporated the four electrodes and the membrane, which contained tetrabutylammonium tetraphenylborate. When the influence of the applied potential and of the flow‐injection variables on the determination of tetrabutylammonium was studied, a linear relationship was observed between current peak height and ion concentration over a range of 5×10^?6–6×10^?5 M tetrabutylammonium. Good repeatability and between‐day reproducibility and high sample frequency were obtained. The effect of other ions was studied. Two different amperometric methods, indirect and direct, were also developed for the determination of dodecylsulfate in the concentration range 3×10^?5–9×10^?4 M.