含杀菌、吸附双功能基棉纤维的制备与性能

化学改性;吸附剂;杀菌剂;含杀菌、吸附双功能基棉纤维的制备与性能     

醋酸乙烯酯与1-(2-叔丁基过氧异丙基)-3-异丙烯基苯(D120)的共聚行为研究

共聚合;竞聚率;过氧化物;醋酸乙烯酯与1-(2-叔丁基过氧异丙基)-3-异丙烯基苯(D120)的共聚行为研究     

聚丙烯酸载体用于青霉素酰化酶的固定

以反应性单体丙烯酸和交联剂二乙烯基苯,以石油醚为致孔剂,通过悬浮聚合制备固定化酶的载体,并用于对青霉素酰化酶的固定。研究了丙烯酸与二乙烯基苯以不同摩尔比对青霉素酰化酶固定活性的影响,以及悬浮聚合时水油相比例的不同所合成的载体对固定化酶性能的影响。当丙烯酸和二乙烯基苯摩尔比为84.2:4时合成的载体固定青霉素酰化酶的酶活为2784U/g,而水油相比为2.75:1（丙烯酸和二乙烯基苯摩洋比为84.2:5）时固定青霉素酰化酶活达到2183U/g。固定青霉素酰化酶可使青霉素转化,得到半合成青霉素的中间体6-氨基青霉烷酸,由此可制成高效、广谱、服用方便的新青霉素。     

Investigations on the adsorbents for uremic middle molecular toxins (II)

Chitosan resins, which clinically served as adsorbents in hemo perfusion therapy, were prepared with reversed-phase suspension methodology using three differently structured crosslinking agents, methanal, glyoxal and glutaraldehyde. And the glyoxal and glutaraldehyde crosslinked chitosan resins were reduced with NaBH₄ afterwards. By analyzing the results from FTIR and SEM, it was found that the reduction treatment to the adsorbents efficiently improved the chemical stability of these chitosan resins, and the shifts in crosslinking agents exerted influences over the morphologies of the adsorbents obviously. After being put to use in the adsorption tests upon some model uremic middle molecular toxins and BSA in vitro, all three adsorbents demonstrated a fairly realistic adsorption capability to the model toxins but little to BSA. And the adsorption process reached the equilibrium in a clinically qualified short time. But the adsorption capacities of these adsorbents to the model toxins were quite different. It had been found that with the growing of fatty chain length of crosslinking agent, these adsorbents showed a gradually increased adsorption capacity to the model toxins, and the glutaraldehyde crosslinked chitosan resin behaved best.     

氨基酸在固/液界面的吸附作用

本文介绍了氨基酸在固/液界面吸附等温线的特点,氨基酸液相吸附热力学和活性炭、硅胶、二氧化钛、氧化铝、蒙脱土等自水中吸附氨基酸的机制。     

胞外DNA在生物膜构建中的作用研究进展

生物膜是指细菌为适应外界环境的变化而形成的特殊微生物聚合体,生物膜法是水的生化处理技术的重要分支,在环境工程领域具有重要的位置。本文综述了胞外DNA (extracellular DNA, eDNA)在生物膜形成过程中的作用,首先介绍胞外聚合物(extracellular polymeric substance, EPS)分类以及eDNA在EPS中的分布情况;其次阐述群体感应(quorum sensing, QS)系统调节eDNA在细菌中的释放;为说明eDNA在生物膜形成过程中的机理,本文采用了XDLVO理论揭示eDNA调节细菌的粘附和聚集性能,并探讨了eDNA与蛋白质(proteins, PN)及多聚糖(polysaccharides, PS)的结合行为;最后,对该领域未来的研究方向进行了展望。     

A Stable Quasi‐Solid‐State Sodium–Sulfur Battery

Ambient‐temperature sodium–sulfur (Na–S) batteries are considered a promising energy storage system due to their high theoretical energy density and low costs. However, great challenges remain in achieving a high rechargeable capacity and long cycle life. Herein we report a stable quasi‐solid‐state Na‐S battery enabled by a poly(S‐pentaerythritol tetraacrylate (PETEA))‐based cathode and a (PETEA‐tris[2‐(acryloyloxy)ethyl] isocyanurate (THEICTA))‐based gel polymer electrolyte. The polymeric sulfur electrode strongly anchors sulfur through chemical binding and inhibits the shuttle effect. Meanwhile, the in situ formed polymer electrolyte with high ionic conductivity and enhanced safety successfully stabilizes the Na anode/electrolyte interface, and simultaneously immobilizes soluble Na polysulfides. The as‐developed quasi‐solid‐state Na‐S cells exhibit a high reversible capacity of 877 mA h g^?1 at 0.1 C and an extended cycling stability.     

High‐Pressure Synthesis of a Nitrogen‐Rich Inclusion Compound ReN8⋅x N2 with Conjugated Polymeric Nitrogen Chains

A nitrogen‐rich compound, ReN₈?x N₂, was synthesized by a direct reaction between rhenium and nitrogen at high pressure and high temperature in a laser‐heated diamond anvil cell. Single‐crystal X‐ray diffraction revealed that the crystal structure, which is based on the ReN₈ framework, has rectangular‐shaped channels that accommodate nitrogen molecules. Thus, despite a very high synthesis pressure, exceeding 100 GPa, ReN₈?x N₂ is an inclusion compound. The amount of trapped nitrogen (x) depends on the synthesis conditions. The polydiazenediyl chains [?N=N?]_∞ that constitute the framework have not been previously observed in any compound. Ab initio calculations on ReN₈?x N₂ provide strong support for the experimental results and conclusions.     

Ultrasensitive determination of highly polar trimethyl phosphate in environmental water by molecularly imprinted polymeric fiber headspace solid‐phase microextraction

A sensitive, accurate, and cost effective method for the quantification of trimethyl phosphate, which is highly polar and volatile, in environmental water is presented. Trimethyl phosphate was headspace solid‐phase microextracted on a molecularly imprinted polymeric fiber, and then the fiber was thermally desorbed in the gas chromatograph injector, and the compound was determined. The trimethyl phosphate imprinted polymeric fiber was prepared by copolymerization in a fused silica capillary tube and obtained by removal of the wall of fused silica capillary tube. The monolithic fiber displayed good selectivity toward trimethyl phosphate among its structural analogues. It was thermally stable up to 320°C so that it can withstand the high temperature of the gas chromatograph injector for desorption. The factors influencing the performance of its headspace solid‐phase microextraction were studied. Under the optimal conditions, the method for quantification of trimethyl phosphate in environmental water was well developed. It exhibited significant linearity, the lowest limit of quantification to date, and good recoveries. Using this method, trimethyl phosphate was detected in five out of seven environmental water samples at concentration levels from 0.28 to 1.22 μg/L, illustrating the heavy pollution of trimethyl phosphate in environmental water.     

低温一步法活性炭基脱硫剂的制备与评价

以木屑为原料,在低温条件下一步法制得活性炭基吸附剂,考察了吸附剂制备条件和液-固、气-固吸附条件对吸附剂脱硫性能的影响。结果表明,吸附剂的最佳制备条件为,浸渍液与木屑质量比为1：1,浸渍液中硝酸质量分率为30%、吸附剂表面NiO负载量为5%,常温下浸渍24 h,400℃焙烧3 h。该吸附剂在0.2 g吸附剂/10 mL模拟油、温度为40℃及时间为5 h的液-固吸附脱硫的条件下,脱硫率为28.36%,吸附四次后饱和吸附硫容量可达2.34 mgS/g;在气-固吸附温度为250℃、空速为6.3 h^-1的条件下,饱和吸附硫容量为2.37 mgS/g;高温气-固吸附脱硫对吸附剂的影响表明,与脱硫前相比,吸附剂在比表面积、总孔体积、微孔体积均有明显提高,这说明气-固吸附脱硫过程同时实现了活性炭的扩孔活化。甲苯溶剂再生实验表明,经五次再生后吸附剂的再生性能均可达90%以上。