Fitting complex potential energy surfaces to simple model potentials: application of the simplex-annealing method

A stochastic method of optimization, which combines simulated annealing with simplex, is implemented to fit the parameters of a simple model potential. The main characteristic of the method is that it explores the whole space of the parameters of the model potential, and therefore it is very efficient in locating the global minimum of the cost function, in addition to being independent of the initial guess of the parameters. The method is employed to fit the complex intermolecular potential energy surface of the dimer of water, using as a reference the spectroscopic quality anisotropic site-site potential of Feller et al. The simple model potential chosen for its reparameterization is the MCY model potential of Clementi et al. The quality of the fit is assessed by comparing the geometry of the minimum, the harmonic frequencies, and the second virial coefficients of the parameterized potential with the reference one. Finally, to prove more rigorously the robustness of this method, it is compared with standard nonstochastic methods of optimization.     

O. Carboxyphenylhydrazoethylacetoacetate as an Analytical Reagent for the Determination of Cu(II) and Co(II) in Complex Materials

An extraction‐spectrophotometric method for the determination of trace amounts of copper and cobalt based on their extraction into n‐pentanol with 0. carboxyphenylhydrazoethylacetoacetate (O.CPHEAA) was per formed. Copper was extracted from pH 6.0 – 8.0 and ionic strength 0.5 M – KCl. The maximum absorption of the extracted Cu(II) ‐ O.CPHEAA complex (1:1 & 1:2 species) occurs at 415 nm. The proposed method succeeded in as saying a concentration of 3–63 μg per 10 mL of n‐pentanol (? = 1.25 × 10⁴L mol^?1 cm^?1). The method failed to ex tract cobalt ion into various organic sol vents over a pH range of 2–11. The suggested method is highly selective and sensitive according to a wide scheme of interference studied. Copper in some plant samples was accurately estimated using the suggested method. The obtained results and the results of the AAS method were consistent. The reproducibility test shows a relative standard deviation of 1%. Sandell sensitivity for A = 0.001 is 5 × 10^?3 μg cm^?2.     

Synthesis of New Reagent 2‐Acetylthiophenethiocynate and its Use in Extraction of Pt(IV) Spectrophotometrically

2‐Acetyl thiophenethiocynate (ATT) was synthesized and its characterization study was carried out using elemental analysis, IR and NMR techniques. The new reagent was proposed as an extractant for the development of the extractive spectrophotometric method for determination of Pt(IV) metal. The reagent complexes with the metal to produce a yellow colored complex which was then extracted into ethyl acetate at pH 11.2–11.6 having an absorption maxima at 400 nm. The thermal study showed that the extraction reactions are exothermic in nature with the reagent, and the stoichiometric ratio of Pt(IV) to 2‐acetyl thiophenethiocynate in the organic phase was 1:2. The method permits separation and determination of platinum from real and binary mixtures. The separation of Pt(IV) from bivalent metal ions has been also studied.     

Second‐harmonic response of a series of chiral polyesters: A joint experimental and theoretical study

A series of polyesters with π‐conjugated donor–acceptor segments was synthesized by the condensation of azobenzene‐4,4′‐dicarbonylchloride with 1,4:3,6‐dianhydro‐D‐sorbitol ([α] = + 42.5°) and biphenolic chromophores, bis(4‐hydroxyphenylazo)‐2,2′‐dinitrodiphenylmethane and bis(4‐hydroxyphenylazo)‐2,2′‐dinitrodiphenylsulfone. The polymers were characterized by spectral methods (IR, ultraviolet–visible, and NMR), thermal methods (thermogravimetry and differential scanning calorimetry), wide‐angle X‐ray scattering, and polarimetry. The polymers containing isosorbide units were optically active and crystalline. They exhibited glass‐transition temperature values between 100 and 160 °C and were stable up to 400 °C. The second‐harmonic generation (SHG) efficiency of the polymers was experimentally verified by a powder‐reflection technique with 2‐methyl‐4‐nitroaniline as a reference. The SHG efficiencies of the polymers were compared to those of the chromophores and explained as a function of the percentage of chiral composition. The hyperpolarizability β values were also determined by a two‐level model solvatochromic method and computational methods. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2868–2877, 2002     

Time‐Resolved Synchrotron Radiation Excited Optical Luminescence: Light‐Emission Properties of Silicon‐Based Nanostructures

The recent advances in the study of light emission from matter induced by synchrotron radiation: X‐ray excited optical luminescence (XEOL) in the energy domain and time‐resolved X‐ray excited optical luminescence (TRXEOL) are described. The development of these element (absorption edge) selective, synchrotron X‐ray photons in, optical photons out techniques with time gating coincide with advances in third‐generation, insertion device based, synchrotron light sources. Electron bunches circulating in a storage ring emit very bright, widely energy tunable, short light pulses (<100 ps), which are used as the excitation source for investigation of light‐emitting materials. Luminescence from silicon nanostructures (porous silicon, silicon nanowires, and Si–CdSe heterostructures) is used to illustrate the applicability of these techniques and their great potential in future applications.     

Templated ceramic microstructures by using the breath-figure method

We describe the synthesis of two cyclobutadiene(cyclopentadienyl)cobalt-containing poly(p-phenylene ethynylene)s (PPEs) and their use as precursors for stable ceramic surface coatings. Organometallic PPEs were shaped into hexagonally ordered assemblies by using the breath-figure method. Such breath figures can be washed away with an appropriate solvent. Upon pyrolysis at 500 degrees C under either nitrogen or air, the bubble arrays persist as ceramics and are insoluble in organic solvents or water. The formed pyrolyzed bubble arrays were analyzed by optical and scanning electron microscopy, as well as energy dispersive X-ray microanalysis (EDX). The composition of the ceramic materials is discussed based on EDX and IR data.     

An ultrasensitive method for the determination of thiouracil and phenylthiouracil using capillary zone electrophoresis and laser-induced fluorescence detection

This paper reports the development of a method based on capillary electrophoresis with laser-induced fluorescence detection for the simultaneous determination of thiouracil (TU) and phenylthiouracil (PhTU) with high sensitivity (nanomolar range, i.e., attomoles detected). After derivatization with 5-iodoacetamidofluorescein, the analytes were separated by capillary zone electrophoresis using 20 mM phosphate buffer (pH 10.0) and quantified by fluorescence detection. The linearity range, precision, recovery, and detection limits were determined, and the method was shown to be applicable for the determination of TU and PhTU in spiked feed samples and urine.     

Age-dependent variations of cell response to oxidative stress: proteomic approach to protein expression and phosphorylation

We investigated the protein profiles of variously aged rat astrocytes in response to oxidative stress. After H2O2-exposure of cells at 100 microM for 30 min, the relative intensity of ten protein spots changed on two-dimensional (2-D) gels compared with control gels after silver staining. Matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS) analysis after in-gel digestion revealed that six of these spots corresponded to three kinds of proteins, each of which was composed of a protein and its modified form with a different isoelectric point (pI). These three proteins were identified as peroxiredoxins (PRDXs) II and III, and calpactin I light chain (p11). H2O2-exposure increased the intensity of the spot with lower pI and simultaneously decreased that of the spot with higher pI for both PRDXs II and III. In addition, the expression of annexin VII, S-adenosyl-L-homocysteine hydrolase, elongation factor II fragment (EF-II), and adenosine deaminase was increased by H2O2-exposure in astrocytes from variously aged rats. Using the Pro-Q Diamond staining, heat shock protein 60 kDa (Hsp 60) and alpha-tubulin were observed to be phosphorylated upon H2O2-exposure. While phosphorylation of alpha-tubulin was correlated positively with age, the changes in abundance of ten protein spots as described above were independent of age. These results suggest that aging does not suppress the responses aimed at limiting injury and promoting repair brought about by severe oxidative stress, and might affect cell dynamics including the formation of microtubules.     

Total spontaneous resolution of chiral covalent networks from stereochemically labile metal complexes

Stereochemically labile copper and zinc complexes with the N,N'-dimethylethylenediamine ligand (dmeda) have been shown to be promising precursors for the total spontaneous resolution of chiral covalent networks. (N,N')-[Cu(NO3)2(dmeda)]infinity crystallises as a conglomerate and yields either enantiopure (R,R)-1 or enantiopure (S,S)-1. A mixed-valence copper(I/II) complex, [{Cu(II)Br2(dmeda)}3(Cu(I)Br)2]infinity (2), which crystallises as a pair of interpenetrating chiral (10,3)-a nets, is formed from CuBr, CuBr2 and dmeda. One net contains ligands with solely (R,R) configuration and exhibits helices with (P) configuration while the other has solely (S,S)-dmeda ligands and gives rise to a net in which the helices have (M) configuration. The whole crystalline arrangement is racemic, because the interpenetrating chiral nets are of opposite handedness. With zinc chloride (R,S)-[ZnCl(dmeda)2]2[ZnCl4] (3) is obtained, which is a network structure, although not chiral. Total spontaneous resolution of stereochemically labile metal complexes formed from achiral or racemic building blocks is suggested as a viable route for the preparation of covalent chiral networks. Once the absolute structure of the compound has been determined by X-ray crystallography, a quantitative determination of the enantiomeric excess of the bulk product can be undertaken by means of solid-state CD spectroscopy.     

聚苯类共轭聚合物的合成及荧光特性研究

聚苯类共轭聚合物的合成及荧光特性研究李建科阳明书漆宗能王佛松（中国科学院化学研究所工程塑料国家重点实验室北京１０００８０）关键词聚对苯，共轭聚合物，吸收光谱，荧光光谱，发光共轭聚合物在非线性光学、光电化学池、二次电池等方面有着广泛的应用前景，近...