Quantum-chemical study of manifestations of conjugation in molecules containing conjugated C=C and C=O bonds

Based on the MNDO calculations of the electronic structure of the molecules of acrolein, glyoxal, and butadiene, possible mechanisms of the conjugation in systems containing conjugated C=C and C=O bonds have been analyzed. In the electronic ground state ofs-trans-acrolein, the , -conjugation is very small, whereas in the first excited electronic state, the conjugation is substantial, In the ground state ofs-trans-glyoxal, the ,-conjugation should manifest itself clearly but should be weaker than in butadiene, whereas in the first excited electronic state, this conjugation should be more pronounced, Alternation of double and single bonds in the classic structural formula of a molecule does not ensure that this molecule exhibits the properties of a -conjugated system even in planar conformations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1648–1652, July, 1996.     

Spectral and thermal characterization of polyaniline–oxalic acid salt

Polyaniline–oxalic acid salts were prepared at 5 and 30°C by chemical polymerization of aniline using different concentration of oxalic acid. Polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Conductivity measurements, elemental analysis, Infrared, electronic absorption, electron paramagnetic resonance spectral, and thermogravimetric analysis were performed on the polyaniline salts and bases. Composition and the extent of dopant in polyaniline salt systems where determined. The value of composition of polyaniline: oxalic acid is 4: 1.6 and the polymer yield is around 66%. The value of conductivity, polymer yield and composition of polyaniline–oxalic acid salt is independent of concentration of oxalic acid used and also the synthesis temperature. The results are compared with polyaniline–hydrochloride salt prepared by chemical polymerization. The conductivity of polyaniline–oxalic acid salt is three orders of magnitude lower than that of polyaniline-hydrocholoride salt. © 1995 John Wiley & Sons, Inc.     

Triterpene glycosides ofFatsia japonica. I. Isolation and structure of glycosides fromFatsia japonica seeds

The known triterpene glycosides hederagenin 3-O--L-arabinopyranoside, hederagenin 3-O-\-D-glucopyranoside, oleanolic acid 3-O--sophoroside, hederagenin 3-O--sophoroside, and their 28-O--gentiobiosyl esters, respectively, in addition to the new triterpene glycoside 3-O--sophorosyl-28-O--L-rhamnopyranosyl-(14)-O--gentiobiosyl hederagenin are isolated fromFatsia japonica (Araliaceae) seeds. The structures of these glycosides are established using chemical and spectral methods.Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 131–133, March–April, 2000.     

Stereochemistry of [4 + 2] Cycloadditions of Perfluorinated Selenocarbonyls to 1, 3‐Dienes

In completely stereospecific [4+2] cycloadditions, the perfluorinated selenocarbonyls 1 and 2 react both with trans‐trans‐2, 4‐hexadiene and cis‐trans‐2, 4‐hexadiene to yield 3, 6‐dihydro‐cis‐3, 6‐dimethyl‐2H‐selenapyrans 3 , 4a and 4b . The observed stereoselectivity leads to the conclusion, that the [4+2] cycloaddition of perfluorinated selenocarbonyls follows a concerted pathway. An identical mixture of isomers was isolated when using the precursor for 2 , trimethylstannyl (pentafluoroethyl)selane, which reacts with both 1, 3‐dienes over several weeks to form a mixture of syn‐2‐fluoro‐3, 6‐dihydro‐cis‐3, 6‐dimethyl‐2‐trifluoromethyl‐2H‐selenapyran ( 4a ) and anti‐2‐fluoro‐3, 6‐dihydro‐cis‐3, 6‐dimethyl‐2‐trifluoromethyl‐2H‐selenapyran ( 4b ) in the same ratio as found for 2 , thus proving the intermediate formation of Se=C(F)CF₃ ( 2 ). Complex 2D NMR experiments were used to distinguish the isomers 4a and 4b and to assign the ¹H, ¹³C and ¹⁹F NMR data of the selenaheterocycles.     

Performance of Pt/SnO2 catalyst in the gas phase hydrogenation of crotonaldehyde

Selective hydrogenation of crotonaldehyde was performed on 5% Pt/SnO₂ catalysts, in gaseous phase, at atmospheric pressure, at 353 K. Two types of catalyst were prepared using H₂PtCl₆ and Pt(NH₃)₄(NO₃)₂ as metallic precursors. Their performances were compared as a function of the reduction temperature and both catalysts were characterised by X-ray diffraction after different reduction treatments. Using the ex-chloride catalyst, the selectivity values to the unsaturated alcohol (UOL) resulted into a maximum of 45% while a selectivity as high as 70–77%, in 0–25% conversion range, was achieved by using ex-nitrate catalyst reduced at 443 K. The formation of Pt–Sn alloy on the metal particles of platinum was thought to be necessary to improve the activity and the selectivity on these catalysts. In the contrast, a presence of PtSn₂ formed at a reduction temperature higher than 473 K led to a decrease of activity and selectivity.     

Multivariate optimisation of the experimental conditions for determination of three methylxanthines by reversed-phase high-performance liquid chromatography

Caffeine (1,3,7-trimethylxanthine), theobromine (3,7-dimethylxanthine) and theophylline (1,3-dimethylxanthine) are the most important naturally occurring methylxanthines. Caffeine is a constituent of coffee and other beverage and included in many medicines. Theobromine and theophylline are formed as metabolites of caffeine in humans, and are also present in tea, cocoa and chocolate products.

In order to improve the chromatographic resolution (R_s) with a good analysis time, experimental designs were applied for multivariate optimisation of the experimental conditions of an isocratic reversed-phase high-performance liquid chromatographic (RP-HPLC) method used for the simultaneous determination of caffeine, theobromine and theophylline. The optimisation process was carried out in two steps using full three-level factorial designs. The factors optimised were: flow rate and mobile phase composition. Optimal conditions for the separation of the three methylxanthines were obtained using a mixture of water/ethanol/acetic acid (75:24:1%, v/v/v) as mobile phase and a flow rate of 1.0 mL min⁻¹. The RP-HPLC/UV method was validated in terms of limit of detection (LOD), limit of quantitation (LOQ), linearity, recovery and the precision, calculated as relative standard deviation (R.S.D.). In these conditions, the LOD was 0.10 μg L⁻¹ for caffeine, 0.07 μg L⁻¹ for theobromine and 0.06 μg L⁻¹ for theophylline. The proposed method is fast, requires no extraction step or derivatization and was suitable for quantification of these methylxanthines in coffee, tea and human urine samples.     

Substituted 1,2-Thiazetidine 1,1-Dioxides. Synthesis of (<Emphasis Type="Italic">RS</Emphasis>)- and (<Emphasis Type="Italic">S</Emphasis>)-1,2-Thiazetidine-3-acetic Acid 1,1-Dioxide and its Reactions with Amino Acids and Dipeptides

Summary. (RS)-2-tert-Butyldimethylsilyl-1,2-thiazetidine-3-acetic acid 1,1-dioxide prepared from (RS)-S-benzyl--homocysteine was condensed via DCC/NHS with various L-amino acid esters or dipeptide esters yielding N-silylated -sultam peptides. A -sultam active ester was isolated as an intermediate. Desilylation with TBAF in THF yielded stable N-unsubstituted products, and deprotection of the benzyl esters was achieved by catalytic hydrogenation. (S)-S-Benzyl--homocysteine was obtained by fractional crystallization of the brucine salt of the racemate and transformed into benzyl (S)-1,2-thiazetidine-3-acetate, which was on the other hand synthesized by an enantiospecific route from -benzyl Boc-L-aspartate. Some -sultam peptides were prepared from the (S)-enantiomer, and finally some -sultam peptides containing D-Ala units were obtained.     

An efficient synthesis of the orally-active GpIIb/IIIa antagonist FR184764

An efficient synthesis of the orally-active GpIIb/IIIa antagonist FR184764 was achieved. The key intermediate, an optically active ethynyl β-amino ester, was synthesized efficiently by utilizing a lipase catalyzed kinetic resolution step.     

Certification of reference materials and accreditation of reference material producers: Questionable terminology leads to confusion

In the view of the Deutscher Kalibrierdienst (DKD) , a certifying body for reference materials can be considered to be a calibration laboratory. Therefore, accreditation of calibration laboratories in accordance with ISO/IEC 17025 is the most appropriate way to establish confidence in certificates for reference materials. If necessary, the criteria of ISO/IEC 17025 can be tailored to specific cases. There is no need to provide any new kind of reference-material specific accreditation. However, in view of the variety of reference materials and the practice existing in other countries, accreditation of testing laboratories and product certification bodies may optionally be acceptable as long as the same stringent principles with respect to traceability and measurement uncertainty are applied. Such accreditations but not accreditations of reference material producers (ISO Guide 34) are also covered by existing international mutual recognition arrangements (MRA).     

C→N Migrations of the ethoxycarbonyl group in reactions of ortho-substituted aryl isocyanates with the 1,3-zwitterion derived from triisopropylphosphine and ethyl 2-cyanoacrylate

The reactions of meta—para-substituted aryl isocyanates with phosphorus-containing 1,3-zwitterions, which proceed with the CN migration of the CO₂Et group to form the corresponding carbamates, were extended to ortho-substituted aryl isocyanates. The influence of the steric and electronic effects of the ortho substituents in the aromatic rings of aryl isocyanates on the ease of this rearrangement is qualitatively considered.