聚酰亚胺/钽铌酸钾纳米颗粒复合材料结构与机械性能分子动力学模拟

利用多尺度建模方法构建了聚酰亚胺/钽铌酸钾纳米颗粒复合物模型, 通过分子动力学模拟研究了不同尺寸钽铌酸钾纳米颗粒(5.5, 8.0, 9.4, 10.5, 11.5 Å)对复合材料的结构、弹性模量和相互作用能的影响规律, 并通过计算纳米颗粒表面原子键能和单位表面积原子数目探究了复合物机械性能提高的内部机理. 聚酰亚胺和聚酰亚胺/钽铌酸钾复合材料的杨氏模量分别为2.91和3.17 GPa, 泊松比分别为0.37和0.35, 钽铌酸钾纳米颗粒的引入可以显著改善聚酰亚胺的机械性能. 纳米颗粒表面原子的键能为8.62-54.37 kJ·mol^-1, 表明颗粒与基体主要通过范德华力作用结合且有氢键存在. 计算结果表明, 相同掺杂比例下, 纳米颗粒尺寸越小, 纳米颗粒表面原子数目越大, 颗粒与基体作用更强, 杨氏模量的提高幅度越大, 尺寸效应越显著. 因此, 掺杂小尺寸纳米颗粒是提高聚酰亚胺机械性能的有效途径.     

A low dielectric constant polyimide/polyoxometalate composite

A silane‐modified mono‐lacunary Keggin‐type polyoxometalate (POM), (Bu₄N)₄[SiW₁₁O₃₉{(CH₂?CH? Si)₂O}] (SiW₁₁? CH?CH₂), was obtained by reaction of vinyltrimethoxysilane with K₈(SiW₁₁O₃₉) in acidic MeCN/H₂O mixed solutions. Then, the modified polyoxometalate was physically blended with the pyromellitic dianhydride (PMDA)‐4,4′‐oxydianiline (ODA) poly(amic acid) and the blends were thermally imidized to form polyimide/ polyoxometalate composites. The X‐ray diffraction (XRD) analysis indicates that the polyoxometalate clusters cannot form crystalline structures in the composite, suggesting that the blending leads to improved compatibility between the polymer matrix and the modified polyoxometalate. The EDS (W‐mapping) studies on the composite films reveal that the polyoxometalate clusters are well dispersed in the polyimide matrix. The physical incorporation of modified POM into polyimide remarkably reduced the dielectric constant of the latter from 3.29 to 2.05 when 20 wt% of SiW₁₁? CH?CH₂ was used. Besides, the addition of the modified POM into polyimide increased the storage modulus of polyimide without severely affecting its thermal properties. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterization of naphthalene‐based polyimides,and their use as immobilized enzyme membrane

A new monomer, 1,5‐bis(p‐dimethylaminophenylimino)naphthalene, was prepared through Schiff‐base condensation reaction of 1,5‐diaminonaphthalene and 4‐(dimethylamino)benzaldehyde in the presence of ethanol. A series of aromatic polyimides bearing naphthalene and ? CH?N? groups were synthesized from the diamine with five kinds of commercial dianhydrides via a conventional one‐stage process. The resulting naphthalene based polyimides (NBPs) showed good solubilities in N‐methyl‐2‐pyrrolidone and m‐cresol. NBPs had glass‐transition temperatures at 139–174°C and 10% weightloss temperatures above 430 °C in nitrogen atmospheres. Excellent properties of NBPs are attributed to the incorporation of the naphthalene and ? CH?N? group in 1,5‐bis(p‐dimethylaminophenylimino)naphthalene. Moreover, chemically prepared polyimides were used for immobilization of glucose oxidase (GOx). The amperometric responses of the NBPs‐GOx‐Pt electrodes toward glucose were examined at a potential of 0.7 V in PBS solution by means of time‐base (TB) technique. Results show that NBPs bearing ? O? group membrane (PI‐3) has many advantages in the immobilization of glucose oxidase because of its strong adherence to electrode surface and chemical stability and selectivity. Copyright © 2010 John Wiley & Sons, Ltd.     

Coupling asymmetric flow-field flow fractionation and fluorescence parallel factor analysis reveals stratification of dissolved organic matter in a drinking water reservoir

Using asymmetrical flow field-flow fractionation (AF4) and fluorescence parallel factor analysis (PARAFAC), we showed physicochemical properties of chromophoric dissolved organic matter (CDOM) in the Beaver Lake Reservoir (Lowell, AR) were stratified by depth. Sampling was performed at a drinking water intake structure from May to July 2010 at three depths (3-, 10-, and 18-m) below the water surface. AF4-fractograms showed that the CDOM had diffusion coefficient peak maximums between 3.5 and 2.8 × 10⁻⁶ cm² s⁻¹, which corresponded to a molecular weight range of 680–1950 Da and a size of 1.6–2.5 nm. Fluorescence excitation–emission matrices of whole water samples and AF4-generated fractions were decomposed with a PARAFAC model into five principal components. For the whole water samples, the average total maximum fluorescence was highest for the 10-m depth samples and lowest (about 40% less) for 18-m depth samples. While humic-like fluorophores comprised the majority of the total fluorescence at each depth, a protein-like fluorophore was in the least abundance at the 10-m depth, indicating stratification of both total fluorescence and the type of fluorophores. The results present a powerful approach to investigate CDOM properties and can be extended to investigate CDOM reactivity, with particular applications in areas such as disinfection byproduct formation and control and evaluating changes in drinking water source quality driven by climate change.     

Dynamic mechanical characterization of PMR polyimide/carbon fiber composites modified by fiber coating with silicones

Viscous and elastomeric silicones have been applied as interlayers to carbon fibers in order to develop a tougher, micro-crack resistant, thermally stable polyimide (PMR-15) composite. Carbon fiber is continuously coated with very high molecular weight polydimethylsiloxane (PDMS) and polyvinyl-methylsiloxane (PVMS). Dynamic mechanical properties of the composites have been determined and compared with uncoated carbon fiber reinforced PMR-15 polyimide composites. The presence of the interlayer is shown by the appearance of a new relaxation peak. The peak temperature is found to be a good indication of the degree of the cure of the silicone elastomer. Comparison of the storage moduli of uncoated and coated carbon fiber composites at the service temperature range of the composites indicates that the presence of the silicone interlayer affects the shear moduli of the composites. Apparent activation energy of the α transition of the matrix in the modified composites varies with the amount of interlayer and composition in concert with the impact strength.     

A thermal analysis evaluation of the low temperature synthesis of BaBiO3

Thermal decomposition of metal-organic precursors for the mixed oxide BaBiO₃ was studied using TG and EGA. Precursors produced by polyesterification of bifunctional acids with ethylene glycol (Pechini process) decomposed about 100°C higher than those without the diol. BaCO₃ was identified by IR and XRD as a reaction intermediate. EGA proved that the amount of BaCO₃ was below 10% of the total barium, and that the barium exists mainly as a nitro-compound up to 650°C. Phase-pure BaBiO₃ with a moderately high surface area (1.4 m²/g) could be synthesised from a citrate precursor by the Pechini process at around 850°C.     

Rodlike/flexible polyimide composite films prepared from soluble poly(amic diethyl ester) precursors: Miscibility,structure, and properties

Homogeneous precursor/precursor solutions with various compositions were obtained with appreciably high solid contents in N-methyl-2-pyrrolidone from soluble poly(amic diethyl ester) precursors of rodlike poly(p-phenylene biphenyltetracarboximide) (BPDA-PDA) and flexible poly(4,4′-oxydiphenylene biphenyltetracarboximide) (BPDA-ODA), which are hydrolytically more stable as well as more soluble than the corresponding poly(amic acid)s being equilibrated with the constituent monomers. Both optical microscopic and light scattering measurements showed that the dried precursor blend films and resultant polyimide composite films were optically transparent, regardless of compositions and process conditions. The composite films showed a single T_g behavior. However, for the composite of 30 wt % BPDA-PDA dispersed in the matrix of 70 wt % BPDA-ODA, a smectic crystalline-like aggregation of the BPDA-PDA component was detected on wide-angle x-ray diffraction patterns, indicative of microscopic phase separation between the two components. This phase separation was not detected on the optical microscopy, light scattering, and dynamic mechanical thermal analysis because of their resolution limits: Optical microscopy has a resolution of submicrometers, whereas dynamic mechanical thermal analysis and light scattering have a resolution of ca. 50 Å. Therefore, it is speculated that in the composite films BPDA-PDA and BPDA-ODA polyimide molecules have demixed on the scale of a few nanometers. The mean long periodicity, which was estimated from the small-angle x-ray scattering pattern, varied from 134 to 170 Å as the content of BPDA-ODA component increased. In addition, mechanical properties of the composite films were characterized. ©1995 John Wiley & Sons, Inc.     

The effect of crosslinked networks with poly(ethylene glycol) on sulfonated polyimide for polymer electrolyte membrane fuel cell

To investigate the effect of crosslinking by a hydrophilic group on a sulfonated polyimide electrolyte membrane, sulfonated polyimide end‐capped with maleic anhydride was synthesized using 1,4,5,8‐naphthalenetetracarboxylic dianhydride, 4,4′‐diaminobiphenyl, 2,2′‐disulfonic acid, 2‐bis [4‐(4‐aminophenoxy)phenyl] hexafluropropane and maleic anhydride. The sulfonated polyimides end‐capped with maleic anhydride were self‐crosslinked or crosslinked with poly(ethylene glycol) diacrylate. A series of the crosslinked sulfonated polyimides having various ratios of sulfonated polyimide and poly(ethylene glycol) diacrylate were prepared and compared with uncrosslinked and self‐crosslinked sulfonated polyimides. The synthesized sulfonated polyimide films were characterized for FTIR spectrum, thermal stability, ion exchange capacity, water uptake, hydrolytic stability, morphological structure, and proton conductivity. The formation of sulfonated polyimide was confirmed in FTIR spectrum. Thermal stability was good for all the sulfonated polyimides that exhibited a three‐step degradation pattern. Ion exchange capacity was the same for both the uncrosslinked and the self‐crosslinked sulfonated polyimides (1.30 mEq/g). When the crosslinked sulfonated polyimides with poly(ethylene glycol) were compared, the ion exchange capacity was decreased as 1.27 > 1.25 > 1.23 mEq/g and water uptake was increased as 23.8 < 24.0 < 24.3% with the increase in poly(ethylene glycol) diacrylate content. All the crosslinked sulfonated polyimides with poly(ethylene glycol) diacrylate were stable for over 200 h at 80 °C in deionized water. Morphological structure and mean intermolecular distance were obtained by WAXD. Proton conductivities were measured at 30, 50, 70, and 90 °C. The proton conductivity of the crosslinked sulfonated polyimides with poly(ethylene glycol) diacrylate increased with the increase in poly(ethylene glycol) diacrylate content despite the fact that the ion exchange capacity was decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1455–1464, 2005     

Conductivity of aged non-overlapping and overlapping tracks in ion irradiated polyimide

Non-overlapping as well as overlapping tracks of energetic ions have been introduced into polyimide foils. After aging their conductivity was measured. This — to our knowledge — first systematic study shows that conductivity does not only result from multiple track overlapping, but can be found already in single ion tracks. This conductivity is shown to be primarily a consequence of electronic energy transfer. The conductivity of single ion tracks is higher than that of typical insulators, but still orders of magnitude lower than that of typical semiconductors. The conductivity is independent of the applied electric field strength until at excessive voltages the electric current increases nonlinearly up to complete breakthrough. The total conductivity of an irradiated polyimide foil increases proportionally with ion fluence for large ion track spacings, and approaches saturation when the electronically active track regimes begin to overlap. Above some thousand times track overlapping however, new chemical and structural changes in the irradiated material lead to another strong increase in conductivity.     

Influence of curing temperature on the optical properties of fluorinated polyimide thin films

The influence of curing temperature (CT) on the optical properties of 6FDA/ODA poly(amic acid)-polyimide (PAA-PI) films was characterized by measuring ATR-FT-IR spectra, refractive index (RI) and birefringence of the films. The results showed that the infrared absorption intensity of characteristic peaks (IAICP) corresponding to the imide ring and the RI of PAA-PI films reached their maxima when the films had been cured at 270 °C, while the magnitude of birefringence (|Δn|) of the films reached its minimum as CT rose up to 330 °C. However, the RI decreased as CT was between 270 °C and 330 °C. Both the RI and |Δn| of the film increased obviously when CT increased after 330 °C. We think this is due to the interchain crosslink reaction (ICCR) above 330 °C and can be an evident proof of ICCR. And the evidences supporting ICCR was also discussed via IR differential spectra.