Influence of curing temperature on the optical properties of fluorinated polyimide thin films

The influence of curing temperature (CT) on the optical properties of 6FDA/ODA poly(amic acid)-polyimide (PAA-PI) films was characterized by measuring ATR-FT-IR spectra, refractive index (RI) and birefringence of the films. The results showed that the infrared absorption intensity of characteristic peaks (IAICP) corresponding to the imide ring and the RI of PAA-PI films reached their maxima when the films had been cured at 270 °C, while the magnitude of birefringence (|Δn|) of the films reached its minimum as CT rose up to 330 °C. However, the RI decreased as CT was between 270 °C and 330 °C. Both the RI and |Δn| of the film increased obviously when CT increased after 330 °C. We think this is due to the interchain crosslink reaction (ICCR) above 330 °C and can be an evident proof of ICCR. And the evidences supporting ICCR was also discussed via IR differential spectra.     

The effect of orientation on thermal expansion behavior in polyimide films

The anisotropy of the thermal expansion of polyimide films was investigated . Out-of-plane or thickness direction coefficients of linear thermal expansion (CTE) were calculated from the difference between the coefficient of volumetric expansion (CVE) and the sum of the in-plane or film direction coefficients of linear thermal expansion for commercial and spin-coated PMDA//ODA and BPDA//PPD films and spin coated BTDA//ODA/MPD films. The CVEs were obtained from a pressure-volume-temperature (PVT) technique based on Bridgeman bellows. The CVE was shown to be essentially constant, independent of molecular orientation and thickness. A decrease in the in-plane CTEs therefore occurs at the expense of an increase in the out-of-plane CTE. In all cases the calculated out-of-plane CTE was higher than the measured in-plane CTE. The ratio of the out-of-plane CTE to the in-plane CTE was 1.2, 3.8, and 49.3 for the spin-coated BTDA//ODA/MPD, PMDA//ODA, and BPDA//PPD films, respectively. © 1994 John Wiley & Sons, Inc.     

The transport properties of polyimide isomers containing hexafluoroisopropylidene in the diamine residue

The effect of modification of the central moiety of the dianhydride residue and isomerism on the gas transport and physical properties were compared for six polyimides containing the hexafluoroisopropylidene group in the diamine residue. Substitution of bulkier groups within the dianhydride residue resulted in disruption of chain packing and slight increases in resistance to chain motions which led to an increase in permeability with little loss in selectivity. The permeabilities and diffusivities in the meta connected polyimide isomers were considerably lower than in the para connected polyimide isomers. Similarly, the permselectivities in the meta connected isomers were consistently higher than in the para connected isomers. These lower permeabilities and higher permselectivities were a result of the more dense packing and a significant suppression of small scale motions in the meta connected isomers. The suppression of segmental mobility in the meta connected isomers was indicated by an increase in the sub Tg transition temperatures in these materials relative to the para connected isomers. The differences in transport properties for these polyimides were attributed to contributions by several factors, including: (1) total free volume (2) distribution of free volume (3) intersegmental resistance to chain motions, and (4) intrasegmental resistance to chain motions. © 1994 John Wiley & Sons, Inc.     

无加热氧碘化学激光器超音速喷管

针对氧碘化学激光器的金属喷管在使用过程中需加热保温且存在结构复杂、故障率高等问题,初步选择了几种可用于加工无加热喷管的非金属材料,并以kW级氧碘化学激光器为原型,以聚酰亚胺为例,对激光器运行条件下的喷管温度场进行数值模拟,以验证此种非金属无加热喷管的可行性。结果表明:与金属喷管相比,非金属喷管在不加热保温的情况下能够有效阻止热量传递,防止碘蒸气冷却凝结,满足激光器喷管的使用要求。     

Synthesis and Characterization of Borax-Polyimide for Flame Retardant Applications

Polyamide-borax composites were prepared from solution of polyimide and the borax using N-methyl-2-pyrrolidone as a solvent. The Polyimide-borax composites films (PI-BX) characterized by FTIR, SEM and x-ray. The borax content significantly influences thermal behavior of the polymeric films, such as glass transition and decomposition temperatures of polyimide-borax composites. The glass transition temperatures of the composites were higher than that of the original polyimide. The flammability properties of them were demonstrated by cone calorimeter and indicate that the borax composites have significantly decreased in heat release rate, and mass loss rate. The PI-BX composites appears very good the flame retardant properties.     

Shear Induced Crystallization,a Relaxation Phenomenon in Polymer Melts: A Re‐Collection

Thread‐like nuclei for the crystallization of polymers which are formed at high deformation rates in a temperature range close to the equilibrium melting point appear to be practically stable at temperatures where spherulites are melting. However, the fact that the great majority of experiments on flow induced crystallization have been carried out at temperatures below the melting temperature of the spherulites leads to the conclusion that the precursors for elongated structures, as formed under those conditions, are practically stable from the moment of their creation. In other words: their relaxation times are much longer than any deformation time applied. As a consequence, deformation times as independent parameters lose their importance in these experiments. Long lasting deformations under low stresses can yield the same precursors as short term deformations under high loads. Apparently the only condition is that the applied specific work is the same.     

Ferromagnetic Intermolecular Interaction of N-Protonated Pyridylphenylcarbene

Abstract

The HCl and DCl salts of pheny1-4-pyridyldiazomethane were prepared and irradiated at 6 K to generate the carbenes. Their ESR spectra indicated presence of plural triplet carbenes with slightly-different zero-field splitting constants. Besides the triplet species, we found a quintet species whose signal intensity decreases with increasing temperature. The quintet spin state was concluded to be a ground state which was produced by an intermolecular ferromagnetic interaction of the triplet carbenes. The ferromagnetic interaction would be explained by the McConnell mechanism, judging from the crystal structure of the HCl salt of phenyl-4-pyridylketone.     

脉冲敲击技术对PI微球表面粗糙度的影响

作为点火靶重要候选靶丸之一, 聚酰亚胺 (PI) 空心微球采用降解芯轴技术结合双单体气相沉积聚合法 (VDP) 制备. 在PI涂层过程中微球碰撞对表面质量影响较大, 为了减小碰撞提高表面质量, 选用筛网盘做样品盘, 激励方式由压电振动模式改为脉冲敲击模式进行对比. 实验数据表明微球运动过程中碰撞是引起表面质量变差的原因, 通过理论分析确认了筛网盘通过减少接触点可以减少微球与微球间、微球与样品盘间的碰撞, 并且将压电振动改为脉冲敲击模式可以减小微球碰撞次数. 脉冲敲击模式与压电振动模式相比, 其可控性、微球弹跳幅度、消除静电等方面均优于压电振动. 对于微球壁厚均匀性而言, 压电振动略好于脉冲敲击, 但相差较小. 单个微球的壁厚最大偏差前者为0.68 μm, 优于后者的0.73 μm; 单个微球壁厚平均值在同一批次内的最大起伏, 前者为0.26 μm, 优于后者0.57 μm. 白光干涉仪数据显示脉冲敲击起到了提高微球表面质量的作用, 其表面粗糙度Rq值由52–93 nm 减小到28–44 nm. 关键词： 脉冲敲击技术 聚酰亚胺靶丸 表面粗糙度 壁厚均匀性