Effect of the structure of titanium–magnesium catalysts on the morphology of polyethylene produced

The structure and formation of polyethylene (PE) particles on supported titanium–magnesium catalysts having different structural characteristics (sizes of microcrystallites, mesopores, and subparticles) were studied for the first time. Scanning electron microscopy was used to identify structural elements of the polymer particles formed over such catalysts and to reveal morphological changes in the growing polymer particles when the yield was increased from approximately 0.2 g PE/g catalyst to approximately 13 kg PE/g catalyst. A relationship was found between structural characteristics of the porous catalyst particles, morphology of the nascent polymer particles, and bulk density of the polymer powder. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2298–2308     

Effect of epitaxial crystallization on packet-like space charge characteristics in low-density polyethylene under multi-field coupling conditions

In order to study the effect of epitaxial crystallization on charge transport in low-density polyethylene (LDPE) under multi-field coupling conditions, three typical epitaxial crystallizations, namely disorder (glass substrate), crossover (isotactic polypropylene substrate), and parallel (polytetrafluoroethylene substrate), were prepared and denoted as LD-G, LD-iPP, and LD-PT, respectively. Packet-like space charge through samples was analyzed by the pulsed electro-acoustic (PEA) method. It is shown that different microscopic surface morphologies appeared in the LDPE samples with different epitaxial crystallizations, which, however, do not change the crystalline structure of the bulk. Packet-like space charge phenomena were observed and the distortion field increased with the temperature which could be attributed to the larger amount of charge injection in a shorter period. The differences of the amount and injection rate of the space charge were explained and verified considering the typical chain alignment of epitaxial crystallization, which, in our opinions, contributes to the pass over of positive charge in LD-iPP samples.     

Flame‐retardant and mechanical properties of phenolic foams toughened with polyethylene glycol phosphates

Three kinds of polyethylene glycol phosphates (PEGPs) toughening agents were synthesized by esterification of phosphorus pentoxide (P₂O₅) with polyethylene glycol and characterized by Fourier transform infrared spectra and ³¹P nuclear magnetic resonance. A series of lightweight phenolic foams toughened with different loadings of PEGPs were prepared. Optical microscopy results show that the addition of PEGPs with small molecular weight PEG improves the structural homogeneity of phenolic foams obviously. The flame retardancy of toughened phenolic foams was evaluated by using UL 94, limiting oxygen index, and cone calorimeter. The results indicate that the incorporation of PEGPs not only increases the toughness of phenolic foams but also improves their flame retardancy. Moreover, the thermal stability of PEGPs and the toughened foams was investigated by thermogravimetric analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel Ibuprofen‐based Polyurethane: A New Approach for Drug Delivery

Facile synthesis of novel ibuprofen bearing polyurethane 1 has been achieved for the first time and found to display the release pattern of ibuprofen based on the easy cleavage of ester linkages. Thorough characterizations (FT‐IR, UV‐Vis, NMR, and elemental analysis) were performed to ascertain the structure of polyurethane 1.     

A Tensile Strain Hardening Test Indicator of Environmental Stress Cracking Resistance

Environmental stress cracking resistance (ESCR) is an important indicator of performance for high density polyethylene (HDPE) in structural and polymer pipe applications. The commonly used test for determining ESCR of HDPE can be time consuming and rather imprecise. A tensile strain hardening test was recently proposed to offer a faster way to characterize ESCR of polyethylene. In this paper, a practical approach is adopted whereby the test is extended to room temperature and shown to relate reliably to the ESCR of HDPE. Several HDPE resins (including pipe‐grade resins) are analyzed at strain rates of 0.5 mm/min and 7 mm/min to compare the effect of strain rate. Comparisons between the conventional ESCR test method and the strain hardening test show that strain hardening can be used to rank ESCR of HDPE in a reliable fashion. In our study the more direct measure of “hardening stiffness” is used to compare resins instead of strain hardening modulus. Because no true stress‐strain measurement is needed, this is a much simpler test method than other methods previously suggested. In addition, the use of the natural drawing ratio (NDR) as ESCR ranking indicator is examined. Results show that NDR can also be employed as a strain rate‐independent indicator of ESCR of HDPE. The test proposed herein is practical, simple and precise, and hence a more reliable indicator of ESCR performance of HDPE.     

Vinyl Polymerization. 436. Effect of Magnetic Field on Uncatalyzed Polymerization

The radical polymerization of vinyl monomers initiated with several kinds of hydrophilic macromolecule was carried out in a magnetic field. The magnetic field promoted the polymerization; the conversion of monomers and the molecular weight of the polymers obtained increased with increasing field strength in the range of 0–0.1 T. The dependence of the composition and tacticity of the mother polymer on the magnitude of the magnetic field was studied. Using graft or block copolymers, which consisted of hard and soft segments, the effect of a magnetic field was further investigated. The degree of hardness and tightness of the hydrophobic areas (reaction areas) formed by the mother polymer in the aqueous solution was found to affect the magnetic field effect on the uncatalyzed polymerization. The overall activation energy obtained in the magnetic field was almost equal to that obtained without a magnetic field.     

Novel Preparation of Polyethylene from Nano‐extrusion Polymerization Inside the Nanochannels of MCM‐41/MgCl2/TiCl4 Catalysts

The MCM‐41 and SiO₂ supported TiCl₄ and TiCl₄/MgCl₂ catalysts with different molar ratios of Mg/Ti were synthesized and used for ethylene polymerization under atmospheric pressure. The nanochannels of MCM‐41 serve as nanoscale polymerization reactor and the polyethylene nanofibers were extruded during the reaction. The nanofibers were observed in SEM micrographs of resulting polyethylene. The effect of MgCl₂ on catalytic activity and thermal properties of resulting polyethylene is investigated too. In the presence of MgCl₂, the catalytic activity increased and more crystalline polyethylene with higher melting points were formed. However, no fibers could be observed in the polyethylene prepared by SiO₂ supported catalysts.     

Polyethylene glycol (PEG) mediated green synthesis of 2,5-disubstituted 1,3,4-oxadiazoles catalyzed by ceric ammonium nitrate (CAN)

Abstract

Ceric ammonium nitrate in polyethylene glycol has been used as a sustainable, non-volatile, and ecofriendly catalytic medium for the green synthesis of 2,5-disubstituted 1,3,4-oxadiazoles. This protocol is effective toward various substrates having different functionalities. The easy recyclability of the reaction medium makes the reaction economically and potentially viable for commercial applications.     

PEG 400 promoted nucleophilic substitution reaction of halides into organic azides under mild conditions

Abstract

Polyethylene glycol 400 (PEG 400) has been demonstrated as an efficient and eco-friendly reaction medium for the preparation of organic azides from structurally diverse halides by nucleophilic substitution reaction with NaN₃ under mild conditions. The advantages of this protocol are: operational simplicity, environmental safety, broad substrate scope, excellent functional group tolerance, and short reaction time. The PEG 400 can be recovered and reused.