Triallylstannyllithium-allyllithium as an initiator for the anionic reversible chain transfer polymerization of 1,3-butadiene

The anionic polymerization of 1,3-butadiene using a novel metalloidal anion initiator, triallylstannyllithium (TALi)-allyllithium (ALi), was studied. The TALi-ALi initiated anionic polymerization of 1,3-butadiene gave the star polymer along with the linear polybutadiene (PBD). The star polymer consisted of three PBD branches and a central tin atom. What is striking is a fact that the number-average molecular weights (M_n) and molecular weight distribution of three PBD branches and linear PBD were almost identical. A reversible chain transfer polymerization mechanism, which includes the equilibrium between tri(macroallyl)-stannyllithium and macroallylic anion, is proposed. © 1996 John Wiley & Sons, Inc.     

硫化丁苯橡胶纳观界面耐磨机理及参数影响分析

硫化橡胶因其良好的力学和物理化学性能而被广泛作为摩擦副的基础材料. 本文提出了一种硫化交联算法, 实现了C—C键的硫化互交联和自交联, 构建了硫化丁苯橡胶的分子动力学磨损模型, 从微观摩擦学的角度阐明了硫化交联结构对改善丁苯橡胶磨损性能的机理, 研究了不同界面参数对硫化橡胶微观磨损性能的影响. 结果发现 硫化使丁苯橡胶分子链的界面黏附能力和活动能力更弱, 拉伸和解缠能力更低, 磨损过程中界面累积能量更低, 更不容易脱离橡胶基体, 因此可以表现出更好的摩擦学性能, 更强的抗磨损性能; 随着速度的增大, 硫化橡胶的磨损率降低, 与宏观实验结果一致, 原因是硫化橡胶的原子分布函数和相互作用能随着速度增大而降低, 说明橡胶分子链的黏附能力和活动能力随着速度增加趋弱, 温升更低, 导致较低的磨损率; 压入深度对磨损率的影响规律则呈现相反的结果和趋势.     

凝胶色谱法测定顺丁橡胶平均分子量及其分布的研究

通过一系列的条件试验,包括样品浓度、样品量及流动相流速对柱效的影响,确定了最佳的凝胶色谱（ＧＰＣ）试验条件;采用普适校正法将聚苯乙烯（ＰＳ）标定曲线转换成顺丁橡胶（ＰＢ）标定曲线,并对Ｍａｒｋ－Ｈｏｕｗｉｎｋ方程式中Ｋ,α值的选择进行了讨论;采用４种分子量加宽方程对色谱柱加宽效应进行改正计算,通过比较,选定适合本试验系统的加宽效应的改正方法;用粘度法测得的顺丁橡胶特性粘度（η）吻合ＧＰＣ所测得特性粘度值,证明了方法的可靠性。     

钨酸钠/冰乙酸/过氧化氢作用下聚丁二烯橡胶环氧化及降解行为研究

本文研究了在钨酸钠/冰乙酸/过氧化氢催化体系作用下聚丁二烯橡胶环氧化及降解行为.采用红外(FT-IR)、核磁(1H-NMR)和气相凝胶渗透色谱(GPC)对降解产物进行了表征,结果表明60℃反应24h,聚丁二烯橡胶环氧度为21.27％,而其分子量没有明显降低.     

Experimental and numerical investigations of bi-injection moulding of PA66/LSR peel test specimens

Bi-injection moulding is a widely used process to manufacture engineering products and consumer goods. Typically, a thermoplastic is combined with rubber or another thermoplastic to create colour differences or hard and soft areas, respectively. The aim of this study was to optimise the injection parameters and processing conditions for the moulding of two-component standard peel test specimens with suitable functional properties. In this work, all parameters of thermo-rheo-kinetic behaviour were identified to predict the entire filling stage and the effect of a liquid silicone rubber cross-linking reaction during the injection moulding process. The models of Carreau-Yasuda and Isayev-Deng regarding the thermal dependence assumed by Arrhenius’ law were used. In our study, over-injection moulding is simulated and examined using finite element software (Cadmould 3D) to investigate the thermo-rheo-kinetic behaviour and the adhesion of liquid silicone rubber during the filling mould process in over-moulding. Numerical simulation results were then compared with the experimental results, and good agreement was obtained.     

Relaxation processes in the glassy state: Molecular aspects

Molecular relaxations in the glassy state of amorphous polymers are discussed, and related to the energy requirements of the various possible molecular motions involved under two broad headings: those occurring in groups pendant to the main chain and those occurring in the main chain units themselves. A variety of motions can result in relaxations in polymers with alkane side chains, whereas only rotation (or partial rotation) is possible for pendant phenyl rings. Relaxations in polymers with cycloalkane rings in the side chain can originate within the ring itself or from motion of the ring as a unit. Restricted movements of various types of backbone chain are discussed, and possible alternatives to the postulated crank-shaft motions in polymethylene chains are presented.     

The Use of Thermogravimetry in the Study of Rubber Devulcanization

Thermogravimetry was employed to study the changes occurring in rubber vulcanizates during devulcanization carried out by microwave treatment, a new promising method of recycling rubber waste. The thermogravimetric parameters T _i , T ₅ and T _p and the compositions of devulcanizates in comparison with vulcanizates were determined. The results obtained allowed estimation of the degree of destruction of the polymer chains in response to microwave treatment and permitted establishment of the most advantageous conditions of devulcanization in order to obtain the best properties of rubber devulcanizates for reuse in rubber processing. The results demonstrated that thermogravimetry is a very useful method for investigation and control of the microwave devulcanization process. This revised version was published online in August 2006 with corrections to the Cover Date.     

HTPB‐based polyurethanes. II. SINs with PMMA

Simultaneous interpenetrating networks from poly(methyl methacrylate‐co‐ethyleneglycol dimethacrylate) (PA) and a hydroxyl‐terminated polybutadiene‐based polyurethane (PU) were prepared with various hard‐segment contents (X) in the PU and different ratios (PU/PA) between the components. The level of the reinforcement, the mechanism of molecular failure, and the phase inversion depended strongly on X. Dynamic mechanical results indicated that the interpenetration occurred in the rigid blocks of the PU. The improved thermal and mechanical properties observed with higher values of X were interpreted in terms of the molecular weight and polydispersity of the hard blocks in the PU. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2861–2872, 2000     

亲水性聚硅氧烷改性天然乳胶的性能

以亲水性聚硅氧烷KGF-903共混改性天然乳胶,通过拉力试验、老化试验、接触角测量和扫描电子显微镜等研究了聚硅氧烷的添加量对天然乳胶力学性能、抗老化性能、亲水性能和表面形貌的影响。结果表明,KGF-903含量在1.5%时拉伸强度有最佳的改性效果;KGF-903添加量约为3%时断裂伸长率达到最大,老化前后的断裂伸长率比改性前分别提高57%和50%。随着KGF-903含量的增加,改性天然乳胶片的水接触角逐渐减小;扫描电子显微镜观察的结果表明,添加聚硅氧烷能改变乳胶的分散状态。利用小试的最佳配方(即KGF-903的添加量为1.5%)生产了2批次医用导尿管,其表面光洁度、导尿管球囊的成品率、管身硬度、连接器与导尿管排泄锥形接口所承受的拉力和充气漏斗与引流漏斗连接处所承受的拉力等均有显著的提高,有效改善了产品的质量。     

Microbial desulfurization of waste latex rubber with Alicyclobacillus sp.

A microbe with desulfurizing capability, Alicyclobacillus sp., was selected to recycle waste latex rubber (WLR). The growth characteristics of the microorganism and the technical conditions in the co-culture desulfurization process were studied. The desulfurization effect of Alicyclobacillus sp. on the WLR was characterized, and the mechanism for the microbial desulfurization of WLR was tentatively explored. The results showed that adding 5% (w/v) WLR into medium had little effect on the growth of Alicyclobacillus sp. The surfactant polysorbate 80 (Tween 80) had a toxic effect on Alicyclobacillus sp., but the growth of the microbe was vigorous if the proper technique was used: the mixing of WLR with Tween 80, followed by the addition of the mixture into the culture media. With the increase of desulfurization time, the swelling value of desulfurizated waste latex rubber (DWLR) increased, but the crosslink density decreased. After co-culture desulfurization for 8–10 days, a DWLR with good desulfurization effect was obtained. The mechanical properties of natural rubber (NR)/DWLR composite improved significantly over those of NR/WLR composite. XPS and FTIR results revealed that Alicyclobacillus sp. could break the crosslinked sulfur bonds and oxidize them to sulfones groups. The increase of O element content on the surface of DWLR was confirmed by water contact angle measurements. The relationship between the crosslink density and sol fraction of DWLR with different desulfurization times agreed with the Horikx equation, an indication that the microorganisms could break the crosslinked sulfur bonds on the surface of WLR, but leaving the main chains intact.