Detection of metal ions using ion-channel sensor based on self-assembled monolayer of thioctic acid

Gold electrodes were chemically modified with thioctic acid monolayer designed to mimic biological ion-channel membranes. The technique was then used in the determination of alkali, alkaline earth, thallium(I), and lanthanum metal cations as analytes. Cyclic voltammograms (CV) of [Fe(CN)6]³⁻ an electroactive marker, were measured in the presence of the various types of analyte cations. In the absence of the analyte cation, electrostatic repulsion between the marker anions and the carboxylate groups of the receptor monolayer hindered the approach of the marker anion to the electrode surface and hence hindered its reduction. The modified electrodes responded well to the metal cations except the alkali metal cations. The sensors could detect the trivalent cation La³⁺ at concentrations as low as 10⁻⁸ M. The response of the sensor to the metal cations increase in the order alkali metal3+ can be discriminated in the ratio 1:100. This makes it possible to determine the trivalent ion in a sample matrix containing monovalent and divalent cations. Thallium(I) ion showed marked deviation in its response as compared to monovalent ions of the alkali metals. The ion-channel sensor based on self-assembled monolayer of thioctic acid therefore offers a potential alternative technique for the selective determination of metal ions.     

Determination of 1-aminocyclopropane-1-carboxylic acid in apple extracts by capillary electrophoresis with laser-induced fluorescence detection

A rapid and sensitive method for the determination of 1-aminocyclopropane-1-carboxylic acid (ACC) in apple tissues has been described. This method is based on the derivatization of ACC with 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ), and separation and quantification of the resulting FQ-ACC derivative by capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIF). Our results indicated that ACC derivatized with FQ could be well separated from other interfering amino acids using 20 mM borate buffer (pH 9.35) containing 40 mM sodium dodecyl sulfate and 10 mM Brij 35. The linearity of ACC was determined in the range from 0.05 to 5 microM with a correlation of 0.9967. The concentration detection limit for ACC was 10 nM (signal-to-noise = 3). The sensitivity and selectivity of this described method allows the analysis of ACC in crude apple extracts without extra purification and enrichment procedure.     

Highly diastereoselective synthesis of bicyclo[4.2.0]octanone derivatives by the [2+2] photocycloaddition of chiral cyclohexenonecarboxylates to ethylene

The diastereoselective [2+2] photocycloaddition of a cyclohexenonecarboxylate containing (−)-8-(4-nitrophenyl)menthyl as a chiral auxiliary to ethylene gave the photocycloadduct, a bicyclo[4.2.0]octanone derivative, with a high degree of diastereoselectivity. A photoreaction, conducted in CH₂Cl₂ at −78 °C gave the corresponding photocycloadduct in 88% de. In the presence of Ti(OR)₄ or Me₃SnCl, the diastereoselectivity was increased up to 92% de.     

Reanalysis of Chiral Discrimination of Phenoxypropionic Acid Herbicides on a Teicoplanin Phase Using a Bi-Langmuir Approach

Summary The chiral discrimination of phenoxypropionic acid herbicides by reversed-phase chromatography on a teicoplanin phase has been re-examined using the perturbation method to calculate the solute distribution isotherms. The effects of both temperature and the methanol (organic modifier) content of the mobile phase on the chiral discrimination mechanism were well described by the bi-Langmuir model. The method confirmed a change in the mechanism of enantiomer retention at a critical temperature, T^*, and showed that the mechanism was independent of (i) herbicide molecular structure, i.e. the position of the chloro group on the phenol ring, and (ii) the absolute configuration of the carbon atom. Enantioselectivity was enhanced by increasing the mobile phase methanol content. Use of this approach also revealed that secondary sites on the teicoplanin surface were involved in the processes determining both retention and selectivity. It was clearly demonstrated that these secondary sites of low affinity were not affected by the temperature change and were not involved in the chiral recognition mechanism.     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

Synthesis and characterization of Cu,Ni and Zn binding capability of some amino- and imidazole hydroxamic acids: Effects of substitution of side chain amino-N for imidazole-N or hydroxamic-N-H for -N-CH3 on metal complexation

Solution equilibrium studies on Cu(II)-, Ni(II)- and Zn(II)-N-Me-β-Alaninehydroxamic acid (N-Me-β-Alaha), -N-Me-α-alaninehydroxamic acid (N-Me-α-Alaha), -Imidazole-4-carbohydroxamic acid (Im-4-Cha), -N-Me-imidazole-4-carbohydroxamic acid (N-Me-Im-4-Cha) and -Imidazole-4-acetohydroxamic acid (Im-4-Aha) systems have been performed by pH-potentiometry, UV–Vis spectrophotometry, EPR, CD, ESI-MS and ¹H NMR methods. According to the results: (i) the amino-N atoms are more basic in N-Me-α-Alaha and N-Me-β-Alaha than the hydroxamate function, but the trend is just the opposite between the imidazole-N(3) and hydroxamate. (ii) The metal ion anchor is always the hydroxamate part in the amino acid derivatives, while it is always the imidazole-N(3) in the studied imidazolehydroxamic acids. (iii) The three studied N-Me derivatives do not form metallacrowns. Only hydroxamate type chelate is formed with N-Me-β-Alaha, but with N-Me-α-Alaha a new type of coordination mode (via amino-N and hydroxamate-O) also exists. N-Me-Im-4-Cha also forms a dinuclear complex, [M₂L₃], with Cu(II) and Ni(II) (but not with Zn(II)). In this complex, one of the three ligands might bridge the two metal ions (five-membered hydroxamate-(O,O) plus five-membered (N_im, O_carb) bridging bis-chelating mode), while each of the additional two ligands binds to one metal. (iv) The two studied N–H derivatives, having dissociable proton on the hydroxamic-N, are able to form metallacrown species. A pentanuclear complex, [M₅L₄H₋₄], is exclusively formed above pH 4 between Cu(II) and Im-4-Aha. Interestingly, this 12-metallacrown-4 type complex, although together with various mononuclear binding isomers, appears also with Ni(II) and Zn(II). Unfortunately, the complexes of Im-4-Cha are not soluble in water at physiological pH at all.     

Carboxylic Acids from <Emphasis Type="Italic">Phyllanthus urinaria</Emphasis>

Five compounds, terephthalic acid mono-[2-(4-carboxy-phenoxycarbonyl)-vinyl] ester (1), (E)-3-(5′-hydroperoxy-2,2′-dihydroxy[1,1′-biphenyl]-4-yl)-2-propenoic acid (2), 3,4,5-trihydroxybenzoic acid (3), succinic acid (or butanedioic acid) (4), and 2,3,4,5,6-pentahydroxybenzoic acid (5), were isolated from Phyllanthus urinaria. The structures of these compounds were elucidated by means of spectral techniques including IR, MS, and 1D/2D NMR. 1 and 2 are new compounds.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 14–17, January–February, 2005.     

Determination of Low-Level Ethylenediaminetetraacetic Acid in Water Samples by Ion Chromatography with Ultraviolet Detection

A convenient and sensitive ion chromatographic (IC) method for the analysis of ethylenediaminetetraacetic acid (EDTA) in water samples was proposed. Using a fast reversible reaction of free EDTA and metal–EDTA complexes into Fe(III)–EDTA complex in the presence of Fe(III) ions, sample solutions were applied to an ion-exchange column using a mobile phase (pH 2.3), which was composed of 100 μM Fe(III) chloride and 5 mM methanesulfonic acid. The addition of Fe(III) solution (100 μL) containing 10 mM Fe(III) chloride and 0.5 M methanesulfonic acid to the sample solution (10 mL) permitted the injection of a large volume (400 μL) of sample, which allowed for greater sensitivity. The proposed IC method gave a highly linear (r ² > 0.999) calibration curve ranging 0.005–1.0 μM EDTA and had a limit of detection of 1.5 nM. High repeatability (RSD < 2.1%) and recoveries (88–108%) were also obtained. With this method, total EDTA level in raw and drinking waters were analyzed successfully.     

Preparation and Characterization of Mixed‐Valent Nickel Oxide/Nickel Hexacyanoferrate Hybrid Films and Their Electrocatalytic Properties

Polynuclear mixed‐valent nickel oxide and nickel hexacyanoferrate hybrid film was prepared on glassy carbon electrode by multiple scan cyclic voltammetry. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickel hexacyanoferrate film is characterized by single redox couple whereas nickel oxide/nickel hexacyanoferrate hybrid film exhibits two redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. In stronger basic solution (pH ≥9), nickel hexacyanoferrate film was gradually converted into nickel oxide film during potentiodynamic cycling. The peak potential of nickel oxide redox couple moved into more negative side with increasing pH of contacting solution whereas the peak potential of nickel hexacyanoferrate redox couple remains the same. Electrocatalytic behavior of hybrid film coated electrodes toward ascorbic acid, hydrazine and hydroxylamine was investigated using cyclic voltammetry technique. Analytical application of nickel oxide/nickel hexacyanoferrate hybrid film electrode was tested in amperometry and flow injection analysis.     

Ab initio SCF investigation of the intramolecular hydrogen bonding in δ-aminopentanoic acid

The potential energy surface of the neutral form of-aminopentanoic acid was investigated by means of ab initio 4-31G SCF calculations. Four symmetry unique local minima are stabilized by an intramolecular O-H NH₂ hydrogen bond. The geometries, energies, and wave numbers of these conformers are reported. The hydrogen bond is discussed with respect to all reactions of these conformers and in comparison with the homologues glycine,-alanine, and-aminobutyric acid and also with the bimolecular adducts between formic acid, acetic acid, and propionic acid, on the one hand, and ammonia, methylamine, and ethylamine, on the other hand.