高折射率环氧和环硫型光学树脂的研究进展

环氧树脂;环硫化合物;高折射率环氧和环硫型光学树脂的研究进展     

在线流动注射螯合树脂预富集石英缝管增敏火焰原子吸收法测定水中痕量镉和铜

应用高效的在线流动注射螯合树脂预富集石英缝管增敏火焰原子吸收系统直接测定水中痕量镉和铜 ,试验用内装 2 0 0 mg Amberlite XAD- 4键合的 5-磺酸 - 8-羟基喹啉螯合树脂的锥形柱 ,在 p H6条件下 ,样品流速为 6.0 ml·min-1,90 s装样 ,用 0 .5mol· L-1HCl洗脱 ,分析速度为30样·h-1分别获得 38和 40倍的富集 ,经石英缝管增敏 ,总灵敏度分别提高 1 36和 1 2 0倍 ,检出限为 0 .1和 0 .2μg· L-1。对镉和铜含量分别为 2 .0 ,5.0μg· L-1的水样连续测定 1 1次的相对标准偏差分别为 2 .8%和 3.4% ,可直接测定水体中 μg· L-1级的镉和铜。     

吸附树脂的色层吸附及其在甜菊甙分离纯化中的应用

研究了ADS－7等吸附树脂对甜菊甙各组分的吸附选择性及色层吸附性能,发现ADS－7吸附树脂不仅在吸附甜菊甙时对各个组分呈现出一定的选择吸附顺序,在水洗时还有一定的选择洗脱顺序,这两个顺序正好相反。利用ADS－7吸对脂的这一色层性能,制备了富含甜度最高、味质最好的Rebaudioside A及几科不含色素的高品质甜菊甙,具有很好的实际应用意义。     

不同温度处理的糠醇和聚苯胺树脂碳化产物结构基因变化的红外光谱研究

红外光谱测试结果表明糖醇树脂碳化过程中五员杂环上的碳氧键首先发生断裂,使氧脱出,而剩余的双烯链状结构再进行重排,形成六员稠环结构,并在此基础上发生脱氢反应生成石墨微晶。测试结果还表明聚苯胺树脂中的氮在碳化过程中的稳定性与其相连结的基团结构有密切关系。苯环相连的氮比与苯酚基相连的氮具有更强的抗热解稳定性。聚苯胺碳化产物中的氢主要分为两大类：一类是以碳氢键的形式存在;另一类则是以氮氢键的形式存在。碳化产物中的氢主要是在苯的稠环结构上以碳氢键形式存在。     

糠醛系氮配位螯合树脂对贵金属元素的吸附性能

呋喃衍生物糠醛与二乙烯三胺反应制得了含有Schiff碱基,胺基及大共轭π键地的氮配位螯合树脂,应用电感耦合等离子体发射光谱研究了所得螯合树脂对贵金属元素Au,Pd,Pt,Rh,Ru,Ir及重金属元素Hg的吸附性能。结果表明,所得螯合树脂在较宽的酸度范围内能很好地吸附Au,Pd,Pt,Rh,Ru元素,具有优良的吸附选择性及较高的富集倍数,特别是对Au能达到定量吸附与洗脱,同时,在一定酸度条件下亦对Pt,Ir及Hg显示良好的吸附性能。     

DAIP树脂及其复合材料的性能研究

加入热固性丁苯树脂可降低DAIP树脂的酯键密度,提高其耐水性,在该体系中加入适量的偶联剂,可改善树脂与玻璃纤维的界面,提高复合材料的耐水性和介电性能。     

聚丙烯酸载体用于青霉素酰化酶的固定

以反应性单体丙烯酸和交联剂二乙烯基苯,以石油醚为致孔剂,通过悬浮聚合制备固定化酶的载体,并用于对青霉素酰化酶的固定。研究了丙烯酸与二乙烯基苯以不同摩尔比对青霉素酰化酶固定活性的影响,以及悬浮聚合时水油相比例的不同所合成的载体对固定化酶性能的影响。当丙烯酸和二乙烯基苯摩尔比为84.2:4时合成的载体固定青霉素酰化酶的酶活为2784U/g,而水油相比为2.75:1（丙烯酸和二乙烯基苯摩洋比为84.2:5）时固定青霉素酰化酶活达到2183U/g。固定青霉素酰化酶可使青霉素转化,得到半合成青霉素的中间体6-氨基青霉烷酸,由此可制成高效、广谱、服用方便的新青霉素。     

聚苯乙烯我—1，2—亚乙基多胺树脂催化合成正丁基苯基醚

由氯甲基聚苯乙烯和多－1,2－亚乙基多胺反应合成了聚苯乙烯我－1,2－亚乙基多胺树脂,并通过质量变化,分析,交换量和红外光谱进行了表征,研究了利用该树脂催化合成正丁基苯基醚的反应,催化剂能够回收并重复使用,4次后其质量未损失,活性未下降。     

Speciation of Cr(III) and Cr(VI) by Means of Melamine-Urea-Formaldehyde Resin and FAAS

 A method is described for the quantitative preconcentration and separation of trace chromium in water by adsorption on melamine-urea-formaldehyde resin. Cr(VI) is enriched from aqueous solutions on the resin. After elution the Cr(VI) is determined by FAAS. The capacity of the resin is maximal at ∼ pH 2. Total chromium can be determined by the method after oxidation of Cr(III) to Cr(VI) by hydrogen peroxide. The relative standard deviations (10 replicate analyses) for 10 mg/L levels of Cr(VI), Cr(III) and total chromium were 1.5, 3.5 and 2.8% respectively. The procedure has been applied to the determination and speciation of chromium in lake water, tap water and chromium-plating baths.     

Enthalpy relaxation in an epoxy-cycloaliphatic amine resin

Enthalpy relaxation in a system containing the diglycidyl ether of bisphenol A (DGEBA) resin and a diamine, 1,3-bisaminomethylcyclohexane (1,3-BAC) as curing agent, has been investigated by differential scanning calorimetry (DSC). Samples fully cured were annealed at temperature T_g–15 °C for periods of time from 1 h to a maximum of 168 h. The enthalpy relaxation is analyzed by the peak shift method, in which the sample is heated at 10 °C/min following cooling at various rates through the glass transition region. The key parameters of structural relaxation determined were the non-linearity parameter x=0.47 ± 0.02, the apparent activation energy Δh*=1264 ± 48 kJ/mol or Δh*/R=152 ± 6 kK and the non-exponentiality parameter β ≈ 0.3. The results, obtained by the same method, were compared with those for other systems based on fully cured DGEBA. The correlations among these parameters with the peak shift model should be considered with caution. However, the results show that a correlation between crosslink lengths and the value of Δh* can be considered. The relaxation process for DGEBA/1,3-BAC proves to be highly cooperative. Received: 28 June 2000 Accepted: 6 September 2000