Irreversible helix rearrangement from Cis‐transoid to Cis‐cisoid in poly(p‐n‐hexyloxyphenylacetylene) induced by heat‐treatment in solid phase

Polymerization of p‐n‐hexyloxyphenylacetylene (pHPA) by using a [Rh(norbornadine)Cl]₂‐triethylamine catalyst was carried out at room temperature to afford stereoregular helical poly(p‐n‐hexyloxyphenylacetylene)s (PpHPAs). When ethanol and n‐hexane were used as polymerization solvents, a bright yellow PpHPAs, poly( Y ) with M_n = 8.5 × 10⁴ and its purple red polymer, poly( R ) with M_n = 5.3 × 10⁴ were obtained in 95% yields and 84% yields, respectively. Diffuse reflective UV–vis spectra of poly( Y ) and poly( R ) in solid phase showed different broad absorption peaks at 445 and 575 nm, respectively. X‐Ray diffraction patterns of poly( Y ) and poly( R ) showed typical columnar structures assignable to cis‐transoid and cis‐cisoid structures, respectively, which were also supported by molecule mechanics calculation. Poly( Y ) was irreversibly transformed to a reddish‐black polymer, poly( Y‐B ), which columnar diameter was nearly the same as that of poly( R ). Further, poly( Y ) showed an exothermic peak in the differential scanning calorimetry trace at 80 °C for 1 h in N₂ gas. Thus, these findings suggest a thermally irreversible rearrangement from an unstable cis‐transoid form, poly( Y ) with a stretched cis‐transoid helix to a stable cis‐cisoid form, poly( R ), with a contracted cis‐cisoid helix in the solid phase to give poly( Y → B ) with the cis‐cisoid form. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Controllable photopatterning and photochemical properties of novel copolymer containing dianthracene langmuir–blodgett films

A new series of copolymer poly(N‐hexadecylmeth acrylamide‐co‐bis(anthracen‐9‐ylmethyl) 2‐allylmalonate) [poly(HDMA‐co‐DAnMAMA)]s containing swallow‐tailed double anthracenyl groups and long alkyl group are designed and synthesized. The main route of the photochemical reaction of the p(HDMA‐DAnMAMA)copolymer Langmuir–Blodgett (LB) films is dimerization reaction between the anthracenyl groups under the irradiation of both 365 and 248 nm for limiting irradiation time, resulting to a fine negative‐tone pattern. On the other hand, the anthracenyl groups act just as photodecomposition group under 248 nm for longer irradiation time, resulting to a fine positive‐tone pattern. Consequently, positive‐tone and negative‐tone pattern are obtained by choosing not only a suitable irradiation light wavelength, but the irradiation time at 248 nm. Moreover, it is found that the exposed and unexposed regions of copolymer LB films irradiated at 248 nm have solubility differentiation in gold etchant (I₂/NH₄I/C₂H₅OH/H₂O), that is to say, the gold photopatterns with the maximal resolution of the used mask can be obtained easily without any development process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 139–147, 2012     

Spin-adducts of radicals ·P(O)(OPri)2 and ·CMe3 with pyrrolidino[60]fullerenes studied by ESR spectroscopy

The addition of the ^·Bu^t (R¹) and ^·P(O)(OPrⁱ)₂ (R²) radicals to pyrrolidino[60]fullerenes C₆₀CH₂NMeCHX (X = C₆H₄N(CH₂CH₂Cl)₂, 2,6-(Bu^t)₂C₆H₂OH, PhC₆H₄, and indol-3-yl) was studied by ESR spectroscopy. The rate constants of R¹ radical addition to these compounds and dimerization of spin-adducts of the R¹ radicals with pyrrolidino[60]fullerenes were determined. Pyrrolidino[60]fullerenes manifest considerably higher reactivity toward the R¹ radicals than fullerene C₆₀ and methanofullerenes C₆₀CX¹X² (X¹ = X² = CO₂Et; X¹ = CO₂Me, X² = OP(OMe)₂, X¹ = X² = OP(OEt)₂).     

New reactions of 1-alkynes catalyzed by transition metal complexes

Recently discovered catalytic reactions with ruthenium and lanthanide metal complexes have extended the scope of 1-alkynes as useful reagents. The specific formation of aryl-substituted (Z)-1,3-enzymes via the dimerization of HC(triple bond) CR(1) (R(1) = aryl) has been attained using dimeric lanthanide complexes, the catalytic activity of which appears to be unaffected by time. The dimerization of HC(triple bond) CR(2) (R(2) = t-Bu, SiMe(3)) catalyzed by Ru(cod)(cot)/PR(3) or RuH(2)(PPh(3))(3) produces a good yield of butatrienes (Z)R(2)CH=C=C=CHR(2) with a high degree of selectivity. Under certain conditions, HC(triple bond) C=SiMe(3) dimerizes to yield exclusively (Z)-M(3)Si-C(triple bond) C-CH=CH-SiMe(3). The hydration of HC(triple bond)CR(3) (R(3) = alkyl, aryl) catalyzed by RuCl(2)/PR'(3) or CpRuCl(PR"(3))(2) has realized the first example of anti-Markovnikov regioselectivity in an addition reaction of water that produces aldehydes R(3)CH(2)bond;CHO. The application of this reaction to propargylic alcohols has lead to their formal isomerization to alpha,beta-unsaturated aldehydes. In contrast, the addition of amines R(4)bond;NH(2) (R(4) = aryl) to HCtbond;CR(5) (R(5) = alkyl, aryl) conforms to Markovnikov's rule to produce ketimines R(5)bond;(C=NR(4))bond;CH(3) when catalyzed by a Ru(3)(CO)(12)/additive. Since the reaction can be performed in air without the need for any solvents, it enables the practical synthesis of aromatic ketimines, which are difficult to prepare by conventional methods. The synthesis of indoles using deactivated anilines is one practical application of this reaction. The mechanisms of some of these reactions have been analyzed in detail with the aid of theoretical calculations.     

A convenient strategy of dimerization by microwave heating and using 2,5-diketopiperazine as scaffold

A novel and convenient microwave-assisted dimerization of an active peptide compound using the DKPs as scaffold is described. The key reaction giving rise to the diketopiperazine scaffold is the intermolecular coupling. No epimerization was detected in the reactions used. Conventional and microwave heating of the reactions are compared. Synthesis by microwave irradiation gave the desired compounds in higher yields and in shorter reaction times than those obtained by conventional heating.     

A theoretical study of catalytic hydration reactions of ethylene

The hydration reaction of ethylene, C₂H₄+H₂O → C₂H₅OH, catalyzed by oxoacids (H₃PO₄, H₂SO₄, and HClO₄) and metal cations (B³⁺, Al³⁺, Sc³⁺, Ga³⁺, La³⁺, Be²⁺, Mg²⁺, Ca²⁺, Zn²⁺, and Sr²⁺) are studied systematically by density functional theory with a BLYP functional. The reaction profiles of the main reaction and some side reactions, such as ester formation, dimerization of ethylene, and dehydrogenation of ethanol, have been determined with a variety of catalysts. In each case, the intermediate states, the transition states, and their energetics are calculated. Metal cations react more efficiently for the main reaction than oxoacids, but they also make the dehydrogenation reaction active. While the dimerization reaction is strongly affected by the acidity of the catalyst, both the acidity and basicity of the catalyst are important for the dehydrogenation reaction. Efficient formation of ethanol from ethylene over a catalyst is suggested. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 1292–1304, 2000     

A low-temperature electron diffraction study of structural disorder and its relationship to the Kondo effect in ThAsSe

A low-temperature electron diffraction study has been carried out on ThAsSe to search for evidence of structural disorder associated with the low-temperature non-magnetic Kondo effect. A highly structured and extremely complex characteristic diffuse intensity distribution has been observed at low temperature and interpreted in terms of a gradual charge density wave type phase transition upon lowering of temperature involving disordered As-As dimerization within (001) planes. Plausible models of the proposed As-As dimerization have been obtained using a group theoretical approach.     

Electrochemical dimerization of phenacyl bromides N-acylhydrazones—a new way to 1-N-acylamino-2,5-diaryl-pyrroles

Cathodic reduction of phenacyl bromides N-acyl hydrazones lead to dimeric 1,4-diaryl-1,4-butanedione di-N-acylhydrazones, which give the corresponding 1-N-acylamino-2,5-diarylpyrroles in good yields.     

Synthesis,properties, and gas permeability of novel poly(diarylacetylene) derivatives

Poly(diphenylacetylene)s having various silyl groups are soluble in common solvents, from whose membranes poly(diphenylacetylene) membranes can be obtained by desilylation. The oxygen permeability coefficients of the desilylated polymers are quite different from one another (120–3300 barrers) irrespective of the same polymer structure. When bulkier silyl groups are removed, the oxygen permeability increases to larger extents. Poly[1-aryl-2-p-(trimethylsilyl)phenylacetylene]s are soluble in common solvents, and afford free-standing membranes. These Si-containing polymer membranes are desilylated to give the membranes of poly[1-aryl-2-phenylacetylene]s. Both of the starting and desilylated polymers show very high thermal stability and high gas permeability. 1-Phenyl-2-p-(t-butyldimethylsiloxy)phenylacetylene polymerizes into a high-molecular-weight polymer. This polymer is soluble in common organic solvents to provide a free-standing membrane. Desilylation of this membrane yields a poly(diphenylacetylene) having free hydroxyl groups, which is the first example of a highly polar group-carrying poly(diphenylacetylene). The P/P and P/P permselectivity ratios of poly(1-phenyl-2-p-hydroxylphenylacetylene) membrane are as large as 47.8 and 45.8, respectively, while keeping relatively high P of 110 barrers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5028–5038, 2006