Radical grafting from carbon fiber surface: graft polymerization of vinyl monomers initiated by azo groups introduced onto the surface

This paper describes the radical graft polymerizations of vinyl monomers from carbon fiber surface initiated by azo groups introduced onto the fiber surface. The carbon fiber used in this experiment was the polyacrylonitrile type. The introduction of azo groups onto the carbon fiber surface was achieved by the reaction of 4,4'-azobis (4-cyanopentanoic acid) with isocyanate groups which were previously attached onto the surface by the treatment of the fiber with tolylene 2,4-diisocyanate. The amount of surface azo groups introduced onto nitric acid-treated carbon fiber was determined to be 0.60 x 10^-5 mol 9^-1 by nitrogen analysis. The radical graft polymerization of methyl methacrylate (MMA) was tried. Though the thermal polymerization of MMA proceeded slightly in the absence or in the presence of untreated carbon fiber, the rate of the polymerization was considerably low. In contrast, the graft polymerization of MMA was initiated in the presence of the carbon fiber having surface azo groups, and part of resultant poly(MMA) grafted onto the surface. The percentage of grafting increased with an increase in polymerization time and reached 42.8% after 24 h. The graft polymerizations of other monomers, such as styrene, vinyl acetate, and acrylic acid, were also initiated by the surface azo groups attached onto the carbon fiber, and the corresponding polymer effectively grafted onto the surface.     

Large‐Scale Fluctuation Behavior Prior to the Crystallization of Poly(ethylene terephthalate) Glass: A Small‐Angle Light Scattering Study

The crystallization processes of amorphous, glassy‐state poly(ethylene terephthalate) (PET) at two temperatures, a low temperature near T _g where PET has a slow crystallization speed and a middle temperature (about 55°C above T _g ) where PET crystallization is rapid, were monitored in situ by a time‐resolved small‐angle light scattering (SALS) device. It was found that large‐scale fluctuations happened prior to the crystallization at both temperatures, but the kind of fluctuation had a temperature dependence: at the middle temperature, pure density fluctuation took place during the induction period, whereas at low temperature, both density fluctuation and orientation fluctuation occurred, but the latter was the dominant factor. Analyses of the kinetics of these two kinds of fluctuation processes demonstrated that the spinodal decomposition (SD) type of phase‐separation character was undistinguishable in the SALS scale, while the nucleation‐growth (NG) type of phase behavior could describe the scattering results as well.     

自制固相微萃取探头用于分析大白菜中有机磷农药

采用溶胶-凝胶方法制备的聚甲基苯基乙烯基硅氧烷／羟基硅油（PMPVS／OH-TSO）固相微革取探头与气相色谱（GC）联用对大白菜样品中的有机磷农药（敌敌鼹、二嗪农、甲摹对硫磷、马拉硫磷和乙基对硫磷）进行了分析，同时优化了固相微革取的实验条件．该探头较商用探头萃取能力更强，方法的检出限低（1．01～2．56ng／g），重现性好（3．5％～9．9％），线性范围宽（2个数量级），对市售的大白菜样品进行了标准加入回收实验，5种有机磷农药的同收率分别为80．2％，90．3％，85．4％，81．9％和91.8％，     

Microstructure and Thermal and Tensile Properties of Poly(vinyl alcohol) Nanocomposite Films Reinforced by Polyacrylamide Grafted Cellulose Nanocrystals

Abstract

Polyacrylamide grafted cellulose nanocrystals (CNC-g-PAM) were incorporated into poly(vinyl alcohol) (PVA) by a solution casting method to fabricate nanocomposite films with enhanced thermal and tensile properties. The microstructure and the thermal and tensile properties of the PVA/CNC-g-PAM nanocomposite films were investigated as a function of CNC-g-PAM content. Infrared spectroscopy corroborated the presence of hydrogen bonds between PVA and the PAM on the surface of the CNC. Polarized optical microscopy and scanning electron microscopy revealed good dispersion of the CNC-g-PAM in the PVA matrix and good interfacial compatibility. Accordingly, the initial degradation temperature of the nanocomposite films was elevated slightly compared to pristine PVA film. The glass transition temperature, melting temperature, and crystallinity of the PVA also varied slightly after the incorporation of the CNC-g-PAM. At both 0% and 50% RH, the nanocomposite films showed an obvious increase of elastic modulus, no apparent change of breaking strength and a drastic reduction of elongation at break with increasing CNC-g-PAM content.     

A study on the melt viscosity of linear and branched poly(butyleneterephthalate)

Linear and branched PBTP samples were synthesized and characterized in terms of the intrinsic viscosity, the melt-flow-index and, for some, the melt viscosity over a range of shear rates at 250 °C.An exponent of 3.2 in the equation relating to was found for linear samples. Both linear and branched samples exhibited Newtonian behaviour over a wide range of shear rates, but for any given melt-viscosity the branched samples became shear thinning at lower shear rates than the linear ones. Correlation between a branching index,, and melt-visocity ratio (0,b/0,l) was in agreement with a previous theoretical study.     

高压结晶PET/PC共混体系中大尺寸聚合物伸直链晶体的形态观察

 大尺寸聚合物伸直链晶体在低维体系物理学的研究中具有不可替代的重要作用。但以往高压合成的聚合物伸直链晶体,尺寸较小且合成时间过长,使其作用至今未能显现。加入10%（质量分数）聚碳酸酯（PC）于聚对苯二甲酸乙二醇酯（PET）中,在研究PET/PC共混体系高压结晶行为的过程中快速合成了大量生长厚度超过100 μm 的聚合物伸直链晶体,并采用扫描电子显微镜对其进行了深入研究。研究表明,高压结晶PET/PC共混体系中存在不同类型的大尺寸伸直链晶体：完善的伸直链晶体、沿平行或垂直于C轴方向发生断裂的伸直链晶体、内聚能密度较大而发生内聚破裂的伸直链晶体、不同断裂方式下呈不同形态的楔形状伸直链晶体以及弯曲的伸直链晶体。同时对不同形态伸直链晶体的形成机理作了阐述。     

含铱配合物的聚对苯类电磷光聚合物

通过Suzuki聚合法合成了以聚对苯为主链的含铱配合物的电磷光共轭聚合物。部分苯环单元被β-二酮结尾的烷氧基链取代,进而与2-苯基吡啶配位形成悬垂的铱配合物侧链。宽带隙的聚对苯主链使主体与客体的能级匹配,从而有利于能量的转移。铱配合物通过长β-二酮结尾的烷氧基链悬挂在聚对苯的侧链上提高了聚合物的溶解性,有利于器件的制作。另外,由于连在氧原子上的β-二酮具有较大的旋转自由度,增大了β-二酮的反应活性有利于配位反应的进行。聚合物的EL光谱只显示客体铱配合物的发射,主体的发射已被完全猝灭。这表明聚合物主体和铱配合物客体之间发生了有效的能量转移。PPPIrPPy2聚合物发光器件的EL光谱发光波长为525nm,最大外量子效率为2.6%。     

Chain length effect on dynamical structure of poly (vinyl pyrrolidone)-polar solvent mixtures in dilute solution of dioxane studied by microwave dielectric relaxation measurement

Dielectric relaxation study of the binary mixtures of poly(vinyl pyrrolidone) (PVP) (Mw=24000, 40000 and 360000 g mol⁻¹) with ethyl alcohol (EA) and poly(ethylene glycol)s (PEGs) (Mw=200 and 400 g mol⁻¹) in dilute solutions of dioxane were carried out at 10.1 GHz and 35°C. The relaxation time of PVP-EA mixtures was interpreted by the consideration of a wait-and-switch model in the local structure of self-associated ethyl alcohol molecules and also the PVP chain length as a geometric constraint for the reorientational motion of ethyl alcohol molecules. The formation of complexes and effect of PVP chain length on the molecular dynamics, chain flexibility and stretching of PEG molecules in PVP-PEG mixtures were explored from the comparative values of dielectric relaxation time. Further, relaxation time values in dioxane and benzene solvent confirm the viscosity independent molecular dynamics in PVP-EA mixtures but the values vary significantly with the non-polar solvent environment.     

Metal–Polymer Hybrid Nanoparticles for Correlative High‐Resolution Light and Electron Microscopy

The combination of fluorescence microscopy and electron microscopy promises a deeper insight into the ultrastructural features of cell organelles, e.g., after drug administration. Both methods complement each other and provide, as a correlative approach, a keen insight into the fate of nanoparticles within the cell. Moreover, it represents a promising tool to determine alterations of the cellular environment as a response to particle uptake. However, the availability of suitable correlative markers is mandatory for such correlative approaches. In this contribution, the utilization of poly(ethylene imine) based metal–polymer hybrid particles labeled with small gold nanoparticles and Rhodamine B facilitating the observation of the particles by means of fluorescence as well as by transmission electron microscopy is suggested. Correlative light and electron microscopy is used to study uptake and intracellular fusion processes of endosomal/lysosomal structures.