A New Complex of Europium(II) with edta – Structure and Spectroscopy

A new complex of europium(II) with ethylenediaminetetraacetic acid was obtained by electrochemical reduction. The compound is composed of polymeric chains, guanidinium cations and water molecules. The Eu²⁺ cation is eight‐coordinate (two nitrogen atoms and six carboxylate oxygen atoms), and contrary to europium(III) complexes with edta, does not contain water molecules in the first coordination sphere. Relationships between the coordination mode and IR as well as UV–Vis spectra are discussed.     

Complexation of 6-Deoxy-6-(aminoethyl)amino-β-cyclodextrin with Sodium Cholate and Sodium Deoxycholate

In order to study its guest binding and the inclusion phenomena, 6-deoxy-6-(aminoethyl)amino--cyclodextrin (CDN) was synthesised and its binding properties examined. The complexation phenomena of sodium cholate (NaC) and sodium deoxycholate (NaDC) with CDN has been monitored by the NMR method using ¹³C chemical shift data. The method of continuous variation Job's method has been used to determine the stoichiometry of these supramolecular complexes. The Job's plot confirms the 1 : 1 supramolecular complex for NaC: CDN and the 1 : 2 supramolecular complex for NaDC: CDN. The interaction of NaC and NaDC with CDN has been obtained through two-dimensional Rotational Nuclear Overhauser Effect Spectroscopy (ROESY) NMR. Equilibrium constants were also obtained from ¹³C chemical shift data (C-1, C-3 & C-4) at different pH values (7, 9, & 11).     

Elaboration and characterisation of PDMS-HTiNbO5 nanocomposite membranes

Poly(dimethylsiloxane) (PDMS)-HTiNbO₅ nanocomposite membranes with various HTiNbO₅ nanofiller content were prepared by melt intercalation. WAXS diffraction measurements and TEM observations have suggested that the HTiNbO₅ mineral was exfoliated in the PDMS matrix. The influence of the filler in the membrane was evaluated by water diffusion, gas permeation (CO₂, N₂, O₂, ethane and ethylene), toluene pervaporation and by CO₂ sorption measurements.A filler content of only 2 wt.% in PDMS-HTiNbO₅ nanocomposite membranes slows down the water diffusion significantly, and a filler content of 5 wt.% reduces also the permeability of the films for toluene. The addition of a filler content up to 10 wt.% do not significantly influences the gas permeability (P) except for CO₂. The PDMS matrix appears to be highly permeable and, therefore, a decreasing effect on P is only marked for a very high HTiNbO₅ content. This effect is more pronounced for CO₂, the P value of which decreases by 80% when the amount of nanofiller is 40 wt.%. The sorption measurements show that the interaction between CO₂ and PDMS is weak (isotherms agree with Henry’s law). The filler decreases the solubility of CO₂ in the films (S = 7.94 × 10⁻³ and S = 5.44 × 10⁻³ cm³ STPcm⁻³ film cmHg⁻¹ for PDMS and PDMS-HTiNbO₅ 40 wt.%, respectively).     

Electrochemical Properties of an Osmium(II) Copolymer Film and Its Electrocatalytic Ability Towards the Oxidation of Ascorbic Acid in Acidic and Neutral pH

Copolymerization of an osmium(II) functionalized pyrrole moiety, osmium‐bis‐N,N'‐(2,2′‐bipyridyl)‐N‐(pyridine‐4‐ylmethyl‐(8‐pyrrole‐1yl–octyl)‐amine)chloride ( I ) with 3‐methylthiophene was carried out. The resulting conducting polymer film exhibited a clear redox couple associated with the Os^3+/2+ response and the familiar conducting polymer backbone signature. The effect of film thickness upon the redox properties of the copolymer was investigated in organic electrolyte solutions. Scanning electron micrographs (SEM) along with energy dispersive X‐ray (EDX) spectra of the copolymerized films were undertaken, both after formation and redox cycling in neutral buffer solution. These clearly show that electrolyte is incorporated into the polymer film upon redox cycling through the Os^3+/2+ redox system. The Os^3+/2+ response associated with the copolymer was seen to be significantly altered in the presence of ascorbic acid both in acidic and neutral pH buffer solutions. This pointed to an electrocatalytic reaction between the ascorbic acid and the Os³⁺ form of the copolymer. Under acidic conditions the copolymer film exhibited a sensitivity of 1.76 (±0.05) μA/mM with a limit of detection (LOD) of 1.45 μM for ascorbic acid. Under neutral pH conditions the copolymer exhibited a sensitivity of 19.26 (±1.05) μA/mM with a limit of detection (LOD) of 1.28 μM for ascorbic acid.     

XPS characterization of wood chemical composition after heat‐treatment

XPS was used to characterize the chemical changes occurring after drying or applying a heat‐treatment to beech wood samples. Our results indicate that the surface of this air‐exposed material could be strongly affected either by the ambient atmosphere during storage or by the complex atmosphere in the oven during drying or heat‐treatment. However, the O/C ratio measured after removal of a thin slice of a few millimetres of an untreated sample is in reasonable agreement with that calculated from the well‐established chemical composition of beech. Through this methodology (equivalent to scraping for hard materials) it is expected to get a realistic characterization of the wood. The reliability and repeatability of the XPS measurements have been checked and the method applied to the study of the chemical changes of the beech samples subjected to heat‐treatment. Heating at 240 °C induces a significant decrease of the O/C ratio from 0.55 before to 0.44 after the treatment. Heat‐treatment induces also a decrease of the C₂ carbon contribution (carbon atom bound to a single non‐carbonyl oxygen) associated with an increase of the C₁ carbon contribution (carbon atoms bound only to carbon or hydrogen atoms), in agreement with chemical modifications reported previously in the literature. Thanks to the small analysed area of the equipment used in this study, different spots were analysed to demonstrate the presence or absence of a gradient of chemical composition due to thermal degradation or migration of extractives from within the wood structure to its surface. At the scale of our observations, the different wood samples investigated (dried or heat treated) appear to be homogeneous. Copyright © 2006 John Wiley & Sons, Ltd.     

ToF‐SIMS observation of PTFE surfaces modified by α‐particle irradiation

The surface structure of polytetrafluoroethylene (PTFE) upon α‐particle irradiation has been investigated at doses in the range of 1 × 10⁷ to 1 × 10¹¹ Rad and compared with the surface structure of the unirradiated polymer. Both neat and 25% fiberglass content PTFE were studied. The samples, maintained at nominal room temperature, were irradiated in vacuum by 5.5 MeV ⁴He²⁺ ions generated in a tandem accelerator beam line. Static time‐of‐flight SIMS (ToF‐SIMS) was employed to probe chemical changes at the surface as a function of the irradiation level. In general, the data are indicative of increased cross‐linking at α‐doses less than 1 × 10⁹ Rad, followed by increased fragmentation and unsaturation at α‐doses greater than 1 × 10⁹ Rad. Throughout the irradiation regime, scission is a constant factor promoting cross‐linking, branching, and unsaturation. However, at α‐doses greater than 1 × 10¹⁰ Rad, extreme structural degradation of the polymer becomes evident and is accompanied by conversion to oxygen‐functionalized and aliphatic compounds. Thus, for PTFE in an α‐particle field, an upper exposure limit of ～10¹⁰ Rad is essential for nominal retention of molecular structure. Finally, a quantitative relationship between α‐dose and characteristic fragment ion intensity is developed. Copyright © 2005 John Wiley & Sons, Ltd.     

A facile method for the synthesis of 3,1-benzooxazines from N-acyl-2-(alk-2-enyl)anilines

Electrophilic addition of HCl or Br₂ to N-acyl-2-(alk-2-enyl)anilines is accompanied by intramolecular cyclization of these amides to give 3,1-benzooxazine hydrochlorides or hydrobromides in high yields.     

Phosphaniminato-Trichloroselenate(II): Synthese und Kristallstrukturen von [SeCl(NPPh3)2]+SeCl3− und [Me3SiN(H)PMe3]2+[Se2Cl6]2−

Phosphorane Iminato-Trichloroselenates(II): Syntheses and Crystal Structures of [SeCl(NPPh₃)₂]⁺SeCl₃^? and [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? [SeCl(NPPh₃)₂]⁺SeCl₃^? has been synthesized by the reaction of Se₂Cl₂ with Me₃SiNPPh₃ in acetonitrile solution, forming orangered crystals, whereas red crystals of [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? were obtained by the reaction of Me₃SiNPMe₃ with SeOCl₂ in acetonitrile solution. Both complexes were characterized by X-ray structure determinations. [SeCl(NPPh₃)₂]⁺SeCl₃^?: Space group P2₁/n, Z = 4, structure solution with 7 489 observed unique reflections, R = 0.057. Lattice dimensions at ?60°C: a = 1 117.0; b = 2 241, c = 1 407.5 pm, β = 95.61°. In the cation [SeCl(NPPh₃)₂]⁺ the selenium atom is φ-tetrahedrally coordinated by the chlorine atom and by the nitrogen atoms of the phosphorane iminato ligands, whereas the anion SeCl₃^? has a T-shaped structure with φ-trigonal-bipyramidale surrounding of the selenium atom. [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2?: Space group P2₁/c, Z = 4, structure solution with 2 093 observed unique reflections, R = 0.080. Lattice dimensions at ?70°C: a = 956, b = 828, c = 1 973 pm, β = 93.80°. The structure consists of [Me₃SiN(H)PMe₃]⁺ ions and planar [Se₂Cl₆]^2? anions, in which the selenium atoms are bridged nearly symmetrically by two chlorine atoms.     

Synthesis of 2-(α-Hydroxyalkyl)-2-Oxazoline under Microwave Irradiation in Bluk

Four 2-(α-hydroxyalkyl)-2-oxazolines and a 2-(α-hydroxy-α,α-diphenyl)-2-benzooxazole were synthesized from β-amimoalcohols and α-hydroxy carboxylic acids under microwave irradiation in the absence of a solvent.     

Alkylidinphosphane und -arsane. I [P ≡ C?S]−[Li(dme)3]+ – Synthese und Struktur

Alkylidynephosphanes and -arsanes. I [P ≡ C? S]^?[Li(dme)₃]⁺ – Synthesis and Structure O,O′-Diethyl thiocarbonate and bis(tetrahydrofuran)-lithium bis(trimethylsilyl)phosphanide dissolved in 1,2-dimethoxyethane, react below 0°C to give ethoxy trimethylsilane and tris(1,2-dimethoxyethane-O,O′)lithium 2λ³-phosphaethynylsulfanide – [P≡C? S]^? [Li(dme)₃]⁺ – ( 1a ). Apart from bis(trimethylsilyl)sulfane or carbon oxide sulfide, dark red concentrated solutions of λ³-phosphaalkyne 1 are also obtained from reactions of carbon disulfide with bis(tetrahydrofuran)-lithium bis(trimethylsilyl)phosphanide or with the homologous lithoxy-methylidynephosphane ( 2 ) [1]. The ir spectrum shows two absorptions at 1762 and 747 cm^?1 characteristic for the P≡C and C? S stretching vibrations. The nmr parameters {δ(³¹P) ? 121.3; δ(¹³C) 190.8 ppm; ¹J_CP 18.2 Hz} resemble much more values of diorganylamino-2λ³-phosphaalkynes than those of bis(1,2-dimethoxyethane-O,O′)lithoxy-methylidyne-phosphane ( 2a ). As found by an X-ray structure analysis (P2₁/c; a = 1192.6(16); b = 1239.1(19); c = 1414.8(26) pm; β = 105.91(13)° at ?100 ± 3°C; Z = 4 formula units; wR = 0.064) of pale yellow crystals (mp. + 16°C) isolated from the reaction with O,O′-diethyl thiocarbonate, the solid is built up of separate [P≡C? S]^? and [Li(dme)₃]⁺ ions. Typical bond lengths and angles are: P≡C 155.5(11); C? S 162.0(11); Li? O 206.4(17) to 220.3(20) pm; P≡C? S 178.9(7)°.