双邻苯二酚锑二甲基羟乙铵的晶体结构

含锑配合物是治疗血吸虫病、肿瘤等的常用药物,我们曾对双邻苯二酚锑二乙基羟乙胺进行了晶体结构测定,本文简要报导双邻苯二酚锑二甲基羟乙胺的结构.锑化合物的制法与其二乙基羟乙铵衍生物类似.产物为淡黄色晶体,它在水溶液中长时间放置会变成紫黑色,因此,制得的晶体须立即用丙酮溶解进行重结晶.晶体的密度为1.667g/cm~3.按C_(16)H_(20)O_5NSb的元素分析结果(％)如下:Sb 28.3(28.5),C 43.9(44.9),N 3.3(3.3),H 4.7(4.7).括号内为理论值.     

二安替比林（3,4—二甲氧基）苯基甲烷光度法测定茶叶中锰

在碱性介质中，加热时空气氧化Ｍｎ为Ｍｎ，Ｍｎ与二安替比林苯基甲烷反应生成橙色产物，吐温２０和乳酸起到协同增敏作用，λｍａｘ＝４６０ｎｍ，ε＝７．８×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，锰量在０－１２μｇ／２５ｍｌ范围内符合比尔定律。     

水性涂料用聚丙烯酸酯微乳液的合成及其表征

低污染、低能耗的乳液涂料在建筑涂料中得到了广泛应用,具有核壳结构的聚合物乳液对胶膜的力学性能有较大的改善[1],微米(或纳米)级乳液具有优异的成膜性能,两者均是近年来高分子材料科学中发展十分迅速的新领域[2]。但微乳液聚合时乳化剂用量大,单体含量少。本文采用阴非离子复合乳化剂体系,单体预乳化工艺,种子乳液聚合法,通过正交实验优化聚合工艺参数及体系配方,合成了纳米级聚丙烯酸酯微乳液。并对乳液聚合物的粒径及分布、热性能、分子量及分布、结构等进行了表征。1　实验部分1 1　主要原料及乳液表征苯乙烯(St)、甲基丙烯酸甲…     

Allyl protecting group mediated intramolecular aglycon delivery (IAD): synthesis of α-glucofuranosides and β-rhamnopyranosides

The use of allyl protecting group mediated intramolecular aglycon delivery (IAD) as a strategy for intramolecular glycosylation has been extended to allow the stereoselective synthesis of α-glucofuranosides and β-rhamnopyranosides, in a totally stereoselective fashion. The efficiency of intramolecular glycosylation is dependent on the protecting group pattern of the glycosyl donor, and on the steric bulk of the glycosyl acceptor.     

铁(Ⅲ)-邻菲罗啉溶液体系的光化学还原 Ⅱ.气相色谱法研究光化反应机理

关于Fe(Ⅲ)-邻菲罗啉(phen)溶液的光化学还原现象的记载可追溯到十九世纪末。     

Fe(110)面上CO化学吸附状态的吸附历史依赖关系

Fe(110)面上直接在室温时吸附的CO同先在170 K吸附然后升温到室温的CO吸附有所不同. 前者有解离而后者无解离; 另外, 前者的饱和吸附量比后者低. 这可以用前者发生了解离来解释. 根据以上结果, 提出了以下的设想, Fe(110)面上的CO解离除了需要足够的热能而外, 还需要在表面的吸附位上有邻近的其它未被覆盖Fe原子的存在, 即需要一定的表面结构.     

NBR/ORGANOMODIFIED BENTONITE INTERCALATED HYBRIDS AND THEIR EFFECTS ON THE TOUGHNESS OF PVC

Hybrids of intercalative nitrile-butadiene rubber/organomodified bentonite (NBR/OMB) were prepared by thelatex intercalation technique. Investigation of their mechanical properties and the microstructore of NBR/OMB showed thatthe organomodified bentonite is an effective toughener for NBR. Transmission electronic microscopy (TEM) and X-rnydiffraction (XRD) tests showed that the NBR macromolecule could be intercalated into the galleries of bentonite.Incorporation of NBR/OMB hybrids as tougheners into poly(vinyl chloride) (PVC) results in a substantial increase in theimpact strength of PVC, but little decrease in its tensile strength and flexural strength, compared to the unmodified PVC.     

Study on antimony oxide self-assembled inside HZSM-5

Sb/ZSM-5 was obtained by solid-state reaction with the mixture of Sb₂O₃ and zeolite HZSM-5 under a dry nitrogen flow at 773 K. Characterization of the treated zeolite was undertaken with XRD, ²⁷Al MAS NMR, BET, TGA and FT-IR. The results revealed that part of the antimony oxides migrated into the channels of zeolite, and decreased the Brönsted acid sites in Sb/ZSM-5 remarkably. The other part of antimony oxides together with the amorphous alumino-silicate in the products distributed on the external surface of zeolite ZSM-5 and modified it, while the framework of ZSM-5 in crystal phase was retained. The structure of occluded antimony oxide inside the channels of ZSM-5 was studied by XRD Rietveld method. The result showed that their structure can be described as a chain of non-perfect [Sb₅O₅(H₂O)₂]_n⁵ⁿ⁺, which is parallel to the straight channel of ZSM-5. There is about 0.6 [Sb₅O₅(H₂O)₂]⁵⁺ unit in every cell of the ZSM-5 on an average.     

Synthesis of 1,2-bis(methoxyamino)cycloalkanes from alicyclic 1,2-bis(hydroxyamines)

Derivatives of 1,4-dihydroxypiperazine-2,3-dione were obtained by reaction of cis-1,2-bis(hydroxyamino)cycloalkanes with diethyl oxalate. Their alkylation with CH₂N₂ or Mel afforded 1,4-dimethoxypiperazine-2,3-diones. Hydrolysis of the latter gave 1,2-bis(methoxyamino)cycloalkanes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 925–929, April, 1996.     

The first example of the C-3 alkylation of indoles with cyclopropyl ketones promoted by CeCl3·7H2O/LiI

Indoles undergo smooth alkylation with cyclopropyl ketones in the presence of the CeCl₃·7H₂O/LiI reagent system in refluxing acetonitrile under neutral conditions to produce the corresponding C-3 substituted indole derivatives in good to high yields and with high selectivity. The use of CeCl₃·7H₂O/LiI makes this method simple, convenient, and cost-effective.