Extraction Separation of BSA in Aqueous Two-Phase Systems of Anionic and Cationic Surfactant Mixtures

Aqueous two-phase systems (ATPS) are formed in mixtures of sodium dodecylsulfate (SDS), cetyltrimethyl ammonium bromide (CTAB), and sodium bromide (NaBr). Two different kinds of ATPS appear when CTAB and SDS surfactants are in excess, respectively. Such ATPS may provide a new, useful partitioning system for separation of bovine serum albumin (BSA). The partitioning of BSA was studied in these systems. The results show that the partitioning is affected by the electrical property, the hydrophobicity and the structure of liquid crystal (LC), which exists in the top phase of the ATPS. BSA is extracted into the top phase with higher distribution coefficient when LC and BSA are oppositely charged. The hydrophobicity of LC, which can be improved by increasing the length of alkyl group, enhances the distribution coefficient. The hydrophobicity of lamellar LC and hexagonal LC is stronger than that of cubic LC, which causes extractive capability of the former is higher than the latter.     

A Method for Determination of Low Levels of Exposure to 2,4-D and 2,4,5-T

A method has been developed for the determination of trace quantities of 2,4-dichloro-phenoxyacetic acid (2,4-D), 2,4,5-trichlorophenoxyacetic acid (2,4,5-T), 2,4-dichlorophenol (2,4-DCP), and 2,4,5-trichlorophenol (2,4,5-TCP) in human and rat urine. The method involves acid hydrolysis of the phenolic conjugates, extraction of the free phenols and acids, ethylation with diazoethane, silica-gel column chromatography clean-up of the derivatized urine extract, and gas chromatographic determination using the electron-capture detector. The average recoveries of 2,4-D, 2,4,5-T, 2,4-DCP, and 2,4,5-TCP from rat urine spiked with known amounts of the herbicides and their phenols were 94%, 98%, 92%, and 90%, respectively. The limits of detection for 2,4-D, 2,4,5-T, DCP, and TCP in rat urine were: 0.05, 0.01, 0.10, and 0.01 ppm, respectively. The method was used to analyze urine of rats given various levels of 2,4-D and 2,4,5-T by gavage. Results showed that levels of exposure of 3.75 mcg/kg for 2,4-D and 5.0 mcg/kg for 2,4,5-T in rats can be detected in urine within 24 hr from exposure. Urine samples from occupationally exposed people were analyzed and found to contain 0.2 to 1.0 ppm 2,4-D and 0.05 to 3.6 ppm 2,4,5-T.     

Lyotropic Liquid Crystal to Soft Mesocrystal Transformation in Hydrated Salt–Surfactant Mixtures

Hydrated CaCl₂, LiI, and MgCl₂ salts induce self‐assembly in nonionic surfactants (such as C₁₂H₂₅(OCH₂CH₂)₁₀OH) to form lyotropic liquid‐crystalline (LLC) mesophases that undergo a phase transition to a new type of soft mesocrystal (SMC) under ambient conditions. The SMC samples can be obtained by aging the LLC samples, which were prepared as thin films by spin‐coating, dip‐coating, or drop‐casting of a clear homogenized solution of water, salt, and surfactant over a substrate surface. The LLC mesophase exists up to a salt/surfactant mole ratio of 8, 10, and 4 (corresponding to 59, 68, and 40 wt % salt/surfactant) in the CaCl₂, LiI, and MgCl₂ mesophases, respectively. The SMC phase can transform back to a LLC mesophase at a higher relative humidity. The phase transformations have been monitored using powder X‐ray diffraction (PXRD), polarized optical microscopy (POM), and FTIR techniques. The LLC mesophases only diffract at small angles, but the SMCs diffract at both small and wide angles. The broad surfactant features in the FTIR spectra of the LLC mesophases become sharp and well resolved upon SMC formation. The unit cell of the mesophases expands upon SMC transformation, in which the expansion is largest in the MgCl₂ and smallest in the CaCl₂ systems. The POM images of the SMCs display birefringent textures with well‐defined edges, similar to crystals. However, the surface of the crystals is highly patterned, like buckling patterns, which indicates that these crystals are quite soft. This unusual phase behavior could be beneficial in designing new soft materials in the fields of phase‐changing materials and mesostructured materials, and it demonstrates the richness of the phase behavior in the salt–surfactant mesophases.     

Industrial Applications of Dimeric Surfactants: A Review

Dimeric surfactants also known as gemini surfactants have received lots of attention for high performance formulations in the various scientific and commercial products. Due to the greater amount of hydrocarbon per molecule, the critical micelle concentrations (CMC) of dimeric are typically one order of magnitude lower than the corresponding monomeric surfactant. They are ten to hundred times more efficient at reducing the surface tension of water and the interfacial tension of the oil-water interface than conventional surfactants. Besides, the Krafft temperatures of gemini surfactants with hydrophilic spacers are generally very low giving these surfactants the capacity to be used in cold water. These surfactants display a range of interesting properties, including elevated surface activity, extremely low CMC and extraordinary rheology and self-assimilation aspect. As a consequence of these properties, they have many potential applications include detergents and cleaning agents, cosmetics, textile, and dyeing, dispersion stabilization and emulsion polymerization, genetics science, pharmaceutical, and biological applications.      

Synthesis,Characterization, and Surface Properties of Cationic Gemini Surfactants

New pyridinium gemini surfactants have been synthesized by esterification of renewable fatty acids with mercaptoethanol furnishing respective esters (mercaptomethyl decanoate, mercaptomethyl dodecanoate, mercaptomethyl tetradecanoate, mercaptomethyl hexadecanoate) followed by their subsequent treatment with 4-dimethyl amino pyridine resulting in the formation of title gemini surfactants: 1-(5-(decanoyloxy)-2-hydroxypentyl)-4-((5-(decanoyloxy)-2-hydroxypentyl)dimethyl ammonio)pyridin-1-ium chloride (9), 1-(5-(dodecanoyloxy)-2-hydroxypentyl)-4-((5-(dodecanoyloxy)-2-hydroxypentyl)dimethyl ammonio)pyridin-1-ium chloride (10), 1-(5-(tetradecanoyloxy)-2-hydroxypentyl)-4-((5-(tetradecanoyloxy)-2-hydroxypentyl)dimethyl ammonio)pyridin-1-ium chloride (11), and 1-(5-(hexadecanoyloxy)-2-hydroxypentyl)-4-((5-(hexadecanoyloxy)-2-hydroxypentyl)dimethyl ammonio)pyridin-1-ium chloride (12). Their identifications are based on infrared, ¹H NMR, ¹³C NMR, distortionless enhanced polarization transfer, co-relational spectroscopy (COSY), and mass spectral studies. Their surface active properties are also evaluated on the basis of surface tension and conductivity measurements. Thermal stability of these long chain cationic gemini surfactants have been measured by thermal gravimetric analysis under nitrogen atmosphere.     

Demulsification Efficiency of Some New Demulsifiers Based on 1,3,5-Triethanolhexahydro-1,3,5-triazine

This study mainly concentrates on the synthesis of three novel demulsifiers and the investigation of their demulsification efficiency. The demulsifiers were derived from 1,3,5-triethanolhexahydro-1,3,5-triazine, which was prepared by the reaction of monoethanol amine with formaldehyde. The 1,3,5-triethanolhexahydro-1,3,5-triazine was ethoxylated by introducing 20 units of ethylene oxide and then esterified at different molar ratios with oleic acid (1, 2, and 3) to give three demulsifiers, namely, E₂₀TO, E₂₀TO₂, and E₂₀TO₃. The chemical structures of the prepared demulsifiers were confirmed by ¹H NMR and FTIR spectrum. The demulsification efficiency of these demulsifiers was tested on the natural water-in-oil (w/o) emulsions (50% water content). From the obtained results, it has been found that the investigated demulsifiers have a great potential to break the w/o emulsions. The trioleat ester (E₂₀TO₃) exhibited the maximum demulsification efficiency (96%) after 120 minutes at 55°C.     

Dynamic Interfacial Behavior of Poly(oxyethylene) Lauryl Ether Based Surfactant Mixtures

The adsorption behavior of binary mixtures comprising nonionic surfactants at the air–water interface has been studied by bubble pressure tensiometry at concentrations above and below their critical micelle concentrations. Surfactants with the same hydrocarbon chains but different degree of ethoxylations were chosen as the components to understand their mixing behavior at equilibrium and dynamic conditions. At short times, the adsorption is found to be diffusion limited for individual components as well as for the mixtures, as predicted by the Ward and Tordai model. The effective diffusion coefficient of the monomers in the mixed state displays a dynamic synergism, consistent with the molecular thermodynamic model for dynamic surface tension. However, the equilibrium surface tension and micellar diffusion coefficient of the mixtures exhibit ideal behavior.     

Dynamic and molecular association in premicellar aqueous solutions of dicarboxylate amino acid-based surfactant as studied by 1H NMR

We examined a series of amino acid-based surfactants with two carboxylic groups separated by a spacer of one, two, or three carbon atoms with sodium and calcium counterions in the premicellar concentration region near the CMC. ¹H nuclear magnetic resonance (NMR) spectroscopy and NMR diffusometry techniques were used to study the local environment, association, and translational dynamics of the surfactant's molecules. We measured the self-diffusion coefficients of the micelles, calculated the effective hydrodynamic radii, and determined the temperature region in which the premicelles exist. With an increase in temperature from 295 to 335 K, the premicellar state of the surfactant is replaced by the monomeric state.     

Volatile surfactants: Characterization and areas of application

Amphiphilic aroma molecules, representatives of fragrance molecules, are introduced as dynamic volatile surfactants. Surface tension of their aqueous solutions proves to be a sensitive and revealing quantity, used for assessment of the adsorption-evaporation behavior both under equilibrium conditions and in regimes of no instantaneous equilibrium. Such volatile amphiphiles are characterized by fast adsorption from bulk solution at an air-water interface, on a timescale of tens of microseconds, and exhibit synergetic effect in mixtures with conventional micellar-forming surfactants. Their ability to evaporate from the interface on a time scale of minutes suggests their applications as “temporal” dynamic cosurfactants in technologies involving fast formation of new surfaces. Current challenges concern evaluation of specific material parameters of volatile aroma surfactants in order to enable their selection for targeted applications.     

Electro‐optic switching with liquid crystal graphene

Graphene oxide (GO) particles in aqueous dispersions can form liquid crystal (LC) phases at extremely low concentrations due to the extremely high aspect ratio of the flakes and noticeably, they possess an extremely large Kerr coefficient attractive for low power consumption electro‐optic devices. Reduced graphene does not easily form LC phases in water due to its hydrophobic nature but here we show that stable dispersions of reduced graphene oxide can be realized with surfactants and that they exhibit birefringence upon shearing as well as under application of electric fields. The performance of the system is largely superior to GO LC possessing longer time stability and drastically improved electro‐optic properties with an induced birefringence twice as large at the same field strength thanks to the almost recovery of graphene properties upon reduction. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)