Biochemical study for the effect of henna (Lawsonia inermis) on Escherichia coli

Leaf samples of Lawsonia inermis (Li) were examined for their antimicrobial potential. Broth extracts in different concentrations were prepared and bioassayed in vitro for the growth of Escherichia coli. The growth of E. coli pathogen was inhibited to various degrees by increasing the concentration of the herbal powder. In addition to the observed alterations which were detected electrophoretically in the protein pattern, were activities of the amylase enzyme and glycoprotein fractions. The protein pattern has one common band of Rf 0.47 and two characteristic bands of Rf 0.36 and Rf 0.42 for E. coli sample. The quantitative mutation was observed in the bacteria with different concentrations of L. inermis compared with the control. Some types of proteins in E. coli completely disappeared upon being S.I affected. The amylase pattern showed one common band with Rf 0.037 and two characteristic bands with Rf 0.18 and Rf 0.37 for E. coli sample. The obvious quantitative mutation observed in bacteria with different concentrations of L. inermis compared with E. coli. The glycoprotein pattern recorded one common band at R₁ with Rf 0.94 for E. coli sample and bacteria inoculated with different concentrations of L. inermis. These results confirmed the antibacterial activity of henna leaves and supported the traditional use of the plant in therapy of bacterial infections and disturbances that occurred at the biochemical level. The broth extract of the L. inermis leaves showed obvious antibacterial activity against E. coli.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

植物及土壤中乙二胺二琥珀酸金属复合物的离子色谱分析与质谱鉴定

利用阴离子交换色谱柱及紫外-可见光检测器建立的离子色谱分析方法对植物及土壤中乙二胺二琥珀酸(［S,S′］-ethylenediaminedisuccinic acid,EDDS)金属(Fe(III)、Pb、Cu、Zn和Mn)复合物进行了分析,并用电喷雾质谱对其进行了确认。实验选用戴安IonPac AS11-HC阴离子交换色谱柱(250 mm×4.2 mm,5 μm)及保护柱,以60 mmol/L硝酸铵溶液(pH 6.5)为洗脱液,在1.0 mL/min流速下进行等度洗脱,检测波长为260 nm。金属-EDDS复合物的质谱鉴定采用选择离子扫描模式。结果表明,该方法可以用于Fe(III)-、Pb-、Cu-EDDS复合物的分离测定,三者的检出限分别是0.38,0.54和0.18 μmol/L,回收率分别是99.6%,100.6%和97.5%。该方法操作简单、灵敏,适合于植物样品及土壤样品中含有的Fe(III)-、Cu-和Pb-EDDS复合物的单独或同时分析鉴定。     

An overview of analytical methodologies for the determination of antibiotics in environmental waters

The widespread occurrence of antibiotics as contaminants in the aquatic environment has increased attention in the last years. The concern over the release of antibiotics into the environment is related primarily to the potential for the development of antimicrobial resistance among microorganisms. This article presents an overview of analytical methodologies for the determination of quinolone (Qs) and fluoroquinolone (FQs), macrolide (MLs), tetracycline (TCs), sulfonamide (SAs) antibiotics and trimethoprim (TMP) in different environmental waters. The analysis of these antibiotics has usually been carried out by high-performance liquid chromatography (HPLC) coupled to mass spectrometry (MS) or tandem mass spectrometry (MS/MS) and to a lesser extent by ultraviolet (UV) or fluorescence detection (FD). A very important step before LC analysis is sample preparation and extraction leading to elimination of interferences and prevention of matrix effect and preconcentration of target analytes.     

Method development for the determination of iron in milligram amounts of rice plants (Oryza sativa L.) from cultivation experiments using graphite furnace atomic absorption spectrometry

The amount of sample that is available for analysis in laboratory plant cultivation experiments is usually very limited. Highly sensitive analytical techniques are therefore required, even for elements that are present in the plants at mg g^–1 concentrations, and graphite furnace atomic absorption spectrometry (GFAAS) was chosen in this work because of its micro-sampling capability, and its relatively simple operation. Four micro-methods were investigated for the determination of iron in roots and leaves of rice plants: i) a micro-digestion with nitric and hydrochloric acids, ii) a slurry procedure using tetramethylammonium hydroxide (TMAH) tissue solubilizer, iii) a slurry prepared in 1.4 mol L^–1 nitric acid, and treated in an ultrasonic bath, and iv) the direct analysis of solid samples. The micro-digestion was suffering from high blank values and contamination problems, so that it could not be recommended for routine purposes. The TMAH method exhibited poor precision and occasional low recoveries, particularly for real samples. Direct solid sampling analysis gave results similar to those obtained with the slurry technique with ultrasonic agitation for the determination of iron in certified reference materials with iron content up to about 100 g g^–1, but was too sensitive for the investigated rice plants, which had an iron content up to several mg g^–1. The slurry technique with ultrasonic treatment of the samples, suspended in dilute nitric acid, was finally adopted as the method of choice.The method was then applied for the determination of iron in the leaves and in different compartments of the roots of two rice cultivars, one sensitive to iron toxicity, an important nutritional disorder, and the other one resistant to iron toxicity. The results suggest that the higher resistance to iron toxicity of the second cultivar is due to a smaller uptake of iron from the soil, resulting in lower iron levels in all compartments of the plant.     

Optimized ultrasound‐assisted extraction procedure for the analysis of opium alkaloids in papaver plants by cyclodextrin‐modified capillary electrophoresis

This study investigated the use of ultrasound‐assisted extraction to improve the extraction efficiency of morphine, codeine and thebaine from the papaver plants. Extraction conditions such as type of solvent, temperature, duration, frequency and power level of ultrasonic were optimized and the influences of different parameters on resolution of alkaloids in CE were studied. The optimized condition for CE separation includes a sodium phosphate buffer (100 mM, pH 3.0) containing 5 mM α‐CD. The optimized extraction conditions for ultrasound‐assisted extraction was an extraction time of 1 h, an ultrasonic frequency of 60 kHz with water–methanol (80:20) at 40°C as the extraction solvent. The LOD for alkaloids was found to be 0.1 μg/mL at a signal‐to‐noise ratio of 3:1. The RSDs for peak areas were in the range of 1.4–4.4%. The amounts of opium alkaloids (mg/100 g dried sample) in four Iranian papaver plants were found to be in the range of 7.8–8.7 (morphine), 5.5–9.5 (codeine) and 1.4–10.4 (thebaine). It should be emphasized that no cleanup of the filtered extract was required; hence, direct determination after extraction drastically simplifies the analytical process.     

Determination of potentially toxic heavy metals in traditionally used medicinal plants for HIV/AIDS opportunistic infections in Ngamiland District in Northern Botswana

The determination of four potentially toxic heavy metals, arsenic, chromium, lead and nickel in twelve plant species used for the treatment of perceived HIV and AIDS-associated opportunistic infections by traditional healers in Ngamiland District in Northern Botswana, a metal mining area, was carried out using atomic absorption spectrometry. The medicinal plants; Dichrostachys cinerea, Maerua angolensis, Mimusops zeyheri, Albizia anthelmintica, Plumbago zeylanica, Combretum imberbe, Indigofera flavicans, Clerodendrum ternatum, Solanum panduriforme, Capparis tomentosa, Terminalia sericea and Maytenus senegalensis contained heavy metals in varying quantities: arsenic 0.19–0.54 μg g⁻¹, chromium 0.15–1.27 μg g⁻¹, lead 0.12–0.23 μg g⁻¹ and nickel 0.09–0.21 μg g⁻¹ of dry weight. Chromium was found to be the most abundant followed by arsenic and lead. Nickel was undetectable in nine plant species. M. senegalensis contained the largest amounts of arsenic, chromium and lead. All metals determined were below the WHO permissive maximum levels. The possible maximum weekly intakes of the heavy metals following treatment regimes were insignificant compared to the provisional tolerable weekly intake levels recommended by WHO and the Joint FAO/WHO Expert Committee on Food Additives. This suggests that heavy metal exposure to patients originating from consumption of traditional medicinal plant preparations is within non health-compromising limits.     

Stepwise Injection Spectrophotometric Determination of Flavonoids in Medicinal Plants

A simple, rapid, and automated method for the spectrophotometric determination of flavonoids in medicinal plants was developed using a stepwise injection manifold. The determination was based on formation of colored complexes of flavonoids with Al(III) in micellar media. Analytical characteristics of the determination were significantly improved when cetylpyridinium chloride was used as a micellar catalyst. It was found that the rate of colored complex formation of rutin with Al(III) increased (k = (1.8 ± 0.1) · 10⁴ min^?1mol^?2 L²) in the presence of cetylpyridinium chloride. Under the optimum conditions, a linear response was found from 0.004 to 0.2% (volume of weight %). The detection limit (3s) was determined as 0.001% rutin versus the weight of the sample. The developed method was used for the analysis of different medicinal plants for flavonoids.     

Ultrasound/microwave‐assisted extraction and comparative analysis of bioactive/toxic indole alkaloids in different medicinal parts of Gelsemium elegans Benth by ultra‐high performance liquid chromatography with MS/MS

Indole alkaloids are the main bioactive/toxic components in Gelsemium elegans Benth. To determine the distribution and contents of indole alkaloids in its different medicinal parts, a novel and rapid method using ultra‐high performance LC (UPLC) with MS/MS has been established and validated with an optimized ultrasound/microwave‐assisted extraction method. Four constituents, namely, humantenidine, humantenmine, gelsemine, and koumine, were simultaneously determined in 6 min. Chromatographic separation was achieved on an ultra‐high performance LC BEH C₁₈ column with a gradient mobile phase consisting of methanol and water (containing 0.1% formic acid both in methanol and water) at a flow rate of 0.3 mL/min. The detection was performed on a triple quadrupole electrospray MS/MS by positive ion multiple‐reaction monitoring mode. All the analytes showed good linearity (r ≥ 0.9934) within a concentration range from 0.1–25 μg/mL with a LOQ of 25–50 ng/mL. The overall intra‐ and intervariations of four components were <4.7% with an accuracy of 97.3–101.3%. The analysis results showed that there were remarkable differences in the distribution and contents of four chemical markers in the roots, stems, and leaves of G. elegans Benth. The findings can provide necessary and meaningful information for the rational utilization of its resources.     

The Mediterranean aromatic plants and their culinary use.

Over the centuries, aromatic plants have acquired both practical relevance and socio-cultural meanings that have influenced the evolution of humanity itself and created relevant economic value. In fact, since a long time ago spices were promoted to a leading economic role, and their profitability has been often comparable to that of other commodities traded in much larger volumes. Many geographical discoveries, explorations, worldwide relationships between populations in different continents, were undertaken in order to meet the quest for new flavours, new tastes, new medicinal plants or to find new markets for those already known. While the use of plants in medicine offers an extensive written documentation produced by most ancient human civilizations, the same can not be said for food herbs and flavouring spices. However, without the adequate selection of edible, reliable and valuable plants from the whole biodiversity pool operated by folk cultures everywhere in the world, their proper combination would have never been elaborated and cuisines, like the Mediterranean ones, would have not attained such unique mix of flavour, taste and nutrient content that has no equal in the world. Therefore, any consideration on herbs and aromatic plants in the kitchen leads inequivocally to a journey into tradition.