小试金富集ICP-AES法同时测定试样中的铂、钯、金

文章报道了用小试金富集ICP AES法同时测定试样中的铂、钯和金 ,将 1 0～ 2 0g试样中的铂、钯、金富集在毫克量的银合粒中 ,制成溶液后用ICP AES法同时测定铂、钯和金。该方法的检出限 (μg·mL-1 )Pt,Pd ,Au分别为 0 0 1 ,0 0 0 5 ,0 0 1 ,相对标准偏差 (RSD ,n =1 0 )分别为 0 1 % ,0 1 2 % ,0 0 9% ,标准回收率均在 97%以上。生产实践表明 ,本方法是一种快速、简便、准确的分析方法 ,已被我们应用于测定样品中的铂 ,钯和金     

Particle size dependence of relaxivity for silica-coated iron oxide nanoparticles

We investigate the particle size dependence of the relaxivity of hydrogen protons in an aqueous solution of iron oxide (Fe₃O₄) nanoparticles coated in silica for biocompatibility. The T₁ and T₂ relaxation times for various concentrations of silica-coated nanoparticles were determined by a magnetic resonance scanner. We find that the relaxivity increased linearly with increasing particle size. The T₂ relaxivity (R₂) is more than 50 times larger than the T₁ relaxivity (R₁) for the nanoparticle contrast agent, which reflects the fact that the T₂ relaxation is mainly influenced by outer sphere processes. The high R₂/R₁ ratio demonstrates that silica-coated iron oxide nanoparticles may serve as a T₂ contrast agents in magnetic resonance imaging with high efficacy.     

光照法在玻璃基底上原位生长金纳米结构及其光谱性质

 以硅烷化后吸附粒径小于10 nm的金种子的玻璃片为基底,聚乙烯吡咯烷酮为还原剂,在荧光灯照射条件下还原氯金酸,制备出表面具有金纳米粒子聚集结构的基底。用原子力显微镜、扫描电镜、X射线衍射、吸收和荧光光谱研究了基底的性质。结果表明：随着光照时间增加至20 h,金种子长大为平均粒径140 nm的不规则状多晶粒子,且出现双层粒子堆叠。基底的吸收光谱上出现了由金粒子的表面等离子体激元偶极子耦合引发的强烈吸收峰,随着粒子粒径增大,耦合峰在600~800 nm波段内连续红移升高,表明耦合程度不断增强。在223 nm紫外光的激发下,基底的荧光光谱上在405 nm处出现发射峰,是由金粒子表面激发电子和空穴的复合辐射造成的,发光强度随着基底上粒子平均尺度增加而减弱。     

Ag纳米颗粒对有机小分子太阳能电池性能的改善

在有机小分子太阳能电池CuPc/C60和TiOPc/C60的阳极ITO表面分别制备了一层Ag纳米颗粒,并采用MoO3作为阳极缓冲层,器件的性能均得到有效改善.Ag纳米颗粒的引入所形成的表面等离子激元共振可显著提高有机光活性层的吸收效率和光生激子的分解效率;而MoO3有效抑制了光生激子在有机/金属界面处发生的猝灭,提高了...     

An axial flow cyclone to remove nanoparticles at low pressure conditions

In this study, the axial flow cyclone used in Tsai et al. (2004) was further tested for the collection efficiency of both solid (NaCl) and liquid (OA, oleic acid) nanoparticles. The results showed that the smallest cutoff aerodynamic diameters achieved for OA and NaCl nanoparticles were 21.7 nm (cyclone inlet pressure: 4.3 Torr, flow rate: 0.351 slpm) and 21.2 nm (5.4 Torr, 0.454 slpm), respectively. The collection efficiencies for NaCl and OA particles were close to each other for the aerodynamic diameter ranging from 25 to 180 nm indicating there was almost no solid particle bounce in the cyclone. The 3-D numerical simulation was conducted to calculate the flow field in the cyclone and the flow was found to be nearly paraboloid. Numerical simulation of the particle collection efficiency based on the paraboloid flow assumption showed that the collection efficiency was in good agreement with the experimental data with less than 15% of error. A semi-empirical equation for predicting the cutoff aerodynamic diameter at different inlet pressures and flow rates was also obtained. The semi-empirical equation is able to predict the cutoff aerodynamic diameter accurately within 9% of error. From the empirical cutoff aerodynamic diameter, a semi-empirical square root of the cutoff Stokes number, , was calculated and found to be a constant value of 0.241. This value is useful to the design of the cyclone operating in vacuum to remove nanoparticles.     

Synthesis and antibody conjugation of magnetic nanoparticles with improved specific power absorption rates for alternating magnetic field cancer therapy

Bionized nanoferrite (BNF) particles with high specific power absorption rates were synthesized in the size range of 20–100 nm by high-pressure homogenization for targeted cancer therapy with alternating magnetic fields. Several strategies were used to conjugate antibodies to the BNF particles. These strategies were compared using an immunoassay to find optimal conditions to reach a high immunoreactivity of the final antibody–particle conjugate.     

Intra-arterial application of magnetic nanoparticles for targeted thrombolytic therapy: A rat embolic model

Targeted delivery of thrombolytic drug to the site of emboli exhibits potential to greatly reduce hemorrhagic side effect. A rat embolic model with an easy access of a magnet was established for study of the efficacy of magnetic drug targeting. In anesthetized rats, a whole blood clot produced in vitro was injected from the right iliac artery and lodged in the left iliac artery. Intra-arterial infusion of recombinant tissue plasminogen activator (rt-PA) thereafter significantly reversed the iliac flow within 15 min. Placement of an NdFeB magnet above the left iliac artery caused magnetic nanoparticle retention against hemodynamic dragging force in the presence and absence of the clot. Our results suggest the feasibility of this rat embolic model for the study of magnetic targeted delivery of thrombolytic drugs.     

气/液界面自组装金纳米粒子薄膜作为SERS基底检测三聚氰胺

采用气/液界面自组装方法制备金纳米粒子薄膜作为SERS基底,其结构规整、均匀,利用此基底对三聚氰胺实现高灵敏的半定量分析。此SERS基底的制备是直接于水相合成的金纳米粒子中加人正十二硫醇,金纳米粒子通过硫醇修饰后由亲水性转变成疏水性质,在相界面上自组装为致密金纳米粒子单层膜结构。这种SERS基底不仅制备方法简单,而且应用范围广,除了检测三聚氰胺还可以拓展到其他的非极性的分子如多环芳烃等高灵敏的半定量分析。     

Temperature-dependent specific heat of suspended platinum nanofilms at 80-380 K

Metallic nanofilms are important components of nanoscale electronic circuits and nanoscale sensors. The accurate characterization of the thermophysical properties of nanofilms is very important for nanoscience and nanotechnology. Currently, there is very little specific heat data for metallic nanofilms, and the existing measurements indicate distinct differences according to the nanofilm size. The present work reports the specific heats of 40-nm-thick suspended platinum nanofilms at 80-380 K and ~5×10^-4 Pa using the 3ω method. Over 80-380 K, the specific heats of the Pt nanofilms range from 166-304 J/(kg·K), which are 1.65-2.60 times the bulk values, indicating significant size effects. These results are useful for both scientific research in nanoscale thermophysics and evaluating the transient thermal response of nanoscale devices.     

Structural optimization and segregation behavior of quaternary alloy nanoparticles based on simulated annealing algorithm

Alloy nanoparticles exhibit higher catalytic activity than monometallic nanoparticles, and their stable structures are of importance to their applications. We employ the simulated annealing algorithm to systematically explore the stable structure and segregation behavior of tetrahexahedral Pt–Pd–Cu–Au quaternary alloy nanoparticles. Three alloy nanoparticles consisting of 443 atoms, 1417 atoms, and 3285 atoms are considered and compared. The preferred positions of atoms in the nanoparticles are analyzed. The simulation results reveal that Cu and Au atoms tend to occupy the surface, Pt atoms preferentially occupy the middle layers, and Pd atoms tend to segregate to the inner layers. Furthermore, Au atoms present stronger surface segregation than Cu ones. This study provides a fundamental understanding on the structural features and segregation phenomena of multi-metallic nanoparticles.