Cell Membrane-camouflaged Multi-functional Dendritic Large Pore Mesoporous Silica Nanoparticles for Combined Photothermal Therapy and Radiotherapy of Cancer

Combining photothermal therapy and radiotherapy(PTT-RT) with reducing tumor hypoxia acts as an important antitumor modality. However, it is a great challenge to realize photothermal therapy, radiotherapy and exogenous oxygen supply in one nanosystem. To realize a combination of the three functions, we fabricated a red blood cell membrane(RBCm)-camouflaged, red blood cell content(RBCc) and the copper sulfide(CuS) co-loaded dendritic large pore mesoporous silica nanoparticle(DLMSN/CuS/RBCc/ RBCm). The cell membrane coating endowed the nanoparticles with good stability in the physiological environment, and CuS allowed the nanoparticle exhibiting good photothermal and radiosensitization properties. RBCc loaded nanoparticle DLMSN/CuS/RBCc enhanced superior anti-tumor effect than DLMSN/CuS during combined PTT-RT therapy because the introduction of RBCc increased the exogenous oxygen supply. The in vitro study further demonstrated that the combination of photothermal therapy and radiotherapy induced superior antitumor efficacy than single therapy. Our work thus presents a unique multifunctional nanoscale platform favorable for combined PTT and RT.     

Block Copolymer Supported Gold Nanoparticles Assemblies with Exposed Gold Surface

Polymer-involved nanoparticles or nanoparticle assemblies are now facing a crossroad, where the exposure of nanoparticle and multiple nanoparticles cannot be obtained at the same time. Therefore, a new series of nanoparticle clusters is synthesized, where multiple gold nanoparticles assemble with amphiphilic block copolymers supporting inside. The exposure of gold nanoparticles of the structure is confirmed and increases the reduction rate of 4-nitrophenol by 60%. The assemblies can also be used as surface enhanced Raman scattering(SERS) probes with an enhancement factor(EF) as high as 3×10³.     

Reversible and Stepwise Single-Crystal-to-Single-Crystal Transformation of a Platinum(II) Complex with Vapochromic Luminescence

The vapochromic single-crystal-to-single-crystal (SCSC) transformation of a highly luminescent Pt^II complex bearing an N-heterocyclic carbene [Pt(CN)₂(tBu-impy)] (tBu-impyH⁺=1-tert-butyl-3-(2-pyridyl)-1H-imidazolium) is reported. The trihydrate form of the complex, which exhibits blue ³MMLCT emission owing to weak Pt⋅⋅⋅Pt interactions, changed its luminescence color from blue to yellowish-green upon the desorption of water molecules while keeping the high emission quantum yield of more than 0.45. Variable-temperature and continuous in-situ tracking of single-crystal X-ray diffraction measurements revealed that the SCSC transformation proceeds reversibly by the release and reabsorption of water molecules, thereby changing the stacked structure slightly. As a result, the dynamics of vapor-induced SCSC transformation were elucidated: that the anhydrous form returned to the original trihydrate form in a two-step process under a water vapor atmosphere. In addition, the Pt^II complex exhibited a similar SCSC response accompanied by a luminescence color change in the presence of methanol vapor, while being inactive toward ethanol vapor.     

Photothermal Oxidation of Cinnamyl Alcohol with Hydrogen Peroxide Catalyzed by Gold Nanoparticle/Antimony-Doped Tin Oxide Nanocrystals

Gold nanoparticles with different mean sizes were formed on antimony-doped tin oxide nanocrystals by the temperature-varied deposition-precipitation method (Au/ATO NCs). Au/ATO NCs possess strong absorption in the near-infrared region due to Drude excitation in addition to the localized surface plasmon resonance (LSPR) of AuNPs around 530 nm. Au/ATO NCs show thermally activated catalytic activity for the oxidation of cinnamyl alcohol to cinnamaldehyde by hydrogen peroxide. The catalytic activity increases with a decrease in the mean Au particle size (d_Au) at 5.3 nm≤d_Au≤8.2 nm. Light irradiation (λ_ex >660 nm, ∼0.5 sun) of Au/ATO NCs increases the rate of reaction by more than twice with ∼95 % selectivity. Kinetic analyses indicated that the striking enhancement of the reaction stems from the rise in the temperature near the catalyst surface of ∼30 K due to the photothermal effect of the ATO NCs.     

Simultaneous photocatalytic oxidation and adsorption for efficient As(III) removal by magnetic BiOI/γ-Fe2O3 core–shell nanoparticles

Addressing arsenite pollution in groundwater has drawn great attention. It is attractive to pre-oxidize highly mobile As(III) to relatively low-toxic As(V) with a subsequent adsorption separation process. Herein, BiOI anchoring on γ-Fe₂O₃ is performed to synthesize BiOI/γ-Fe₂O₃ core–shell nanoparticles for efficient removal of As(III) via a simultaneous photocatalytic oxidization–adsorption process. The physical and chemical structures of BiOI/γ-Fe₂O₃ are investigated by transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction measurements. The photoluminescence and electron spin resonance (ESR) characterization were employed to ascertain the possible reaction mechanism of visible-light-driven photocatalytic oxidation of As(III). Such BiOI/γ-Fe₂O₃ delivers a superior As(III) removal capability under visible light irradiation with an arsenic removal efficiency of 99.8% within 180 min, higher than those of BiOCl/γ-Fe₂O₃ (81.7%) and BiOBr/γ-Fe₂O₃ (98.9%). The optimal BiOI/γ-Fe₂O₃ (molar ratio of 2:1) is obtained by rationally adjusting the molar ratio of BiOI to γ-Fe₂O₃. The as-synthesized BiOI/γ-Fe₂O₃ performs well in a wide pH range of 2–8. Only coexisting PO₄^3? anions have a significant effect on the As(III) removal. The free radical trapping experiment and ESR results demonstrate that the ?O₂^? and h⁺ are the main active substances for the photocatalytic oxidation of As(III) on BiOI/γ-Fe₂O₃. This work not only gives a novel magnetic core–shell nanoparticle photocatalyst for efficient photocatalytic oxidation and adsorption of As(III) but also offers a new strategy to rationally design BiOX for its related practical applications.     

Synthesis and characterization of new HgS nanoparticles prepared by Hg(II)-triazole-3-thiol as precursor

Nine Hg(II) complexes, [Hg(DiphtS)₂(L-L)](2–7) {where, HDiphtS = 4,5-diphenyl-1,2,4-triazole-3-thiol; L-L = bis(diphenylphosphino)ethane (dppe) (2); 1,3-bis(diphenylphosphino)propane (dppp)(3); 1,4-bis(diphenylphosphino)butane (dppb)(4); 1,1′-bis(diphenylphosphino)ferrocene (dppf)(5); 2,2′-bipyridine (Bipy)(6) and 1,10-phenanthroline (Phen)(7) } or [Hg(DiphtS)₂(L)₂] (8–9) {where L = triphenylphosphine (Ph₃P) (8) and triphenylphosphine sulphide (Ph₃PS) (9)}, have been prepared form the reaction of [Hg(DiphtS)₂](1) with phosphine or amine as co-ligands. Then characterized by the IR, NMR (¹H and ³¹P) spectroscopy, elemental analysis, molar conductivity. The results supported the monodentate behaviour of HDiphtS ligand in all complexes (1–9) in anion form through the sulfur atom. Complexes 1, 2 and 6 have been used as single source precursors for the preparation of ethylene-diamine capped HgS-nanoparticles. Powder X-ray diffraction (PXRD), and scanning electron microscopy (SEM), have been used to characterize the HgS nanoparticles.     

Revealing the Effect of Surface Composition on Multiwalled Carbon Nanotubes Supported Pt-Fe Alloy Electrocatalysts for Methanol Oxidation Performance

The designs of efficient and inexpensive Pt-based catalysts for methanol oxidation reaction (MOR) are essential to boost the commercialization of direct methanol fuel cells. Here, the highly catalytic performance PtFe alloys supported on multiwalled carbon nanotubes (MWCNTs) decorating nitrogen-doped carbon (NC) have been successfully prepared via co-engineering of the surface composition and electronic structure. The Pt₁Fe₃@NC/MWCNTs catalyst with moderate Fe³⁺ feeding content (0.86 mA/mg_Pt) exhibits 2.26-fold enhancement in MOR mass activity compared to pristine Pt/C catalyst (0.38 mA/mg_Pt). Furthermore, the CO oxidation initial potential of Pt₁Fe₃@NC/MWCNTs catalyst is lower relative to Pt/C catalyst (0.71 V and 0.80 V). Benefited from the optimal surface compositions, the anti-corrosion ability of MWCNT, strong electron interaction between PtFe alloys and MWCNTs and the N-doped carbon (NC) layer, the Pt₁Fe₃@NC/MWCNTs catalyst presents an improved MOR performance and anti-CO poisoning ability. This study would open up new perspective for designing efficient electrocatalysts for the DMFCs field.     

Phosphorescent Bimetallic C^C* Platinum(ii) Complexes with Bridging Substituted Diphenylformamidinates

A series of phosphorescent bimetallic platinum(II) complexes is presented, which were synthesized by the combination of bidentate cyclometalated N-heterocyclic carbene ligands and different bridging diphenylformamidinates. The complexes were characterized by standard techniques and additionally two solid-state structures could be obtained. Photoluminescence measurements revealed the strong emissive behavior of the compounds with quantum yields of up to 90 % and emission lifetimes of approx. 2 μs. The effect of the substitution pattern in the bridging ligands on the structural and photophysical properties of the complexes was examined in detail and rationalized by density functional theory calculations (PBE0/6-311G*).     

Front Cover: Enhancement of Chiroptical Responses of trans‐Bis[(β‐iminomethyl)naphthoxy]platinum(II) Complexes with Distorted Square Planar Coordination Geometry (ChemistryOpen 4/2022)

The Front Cover shows the comparison of circularly polarized luminescence (CPL) properties of square planar platinum(II) complexes with different coordination geometries. Computational studies have revealed that the distortion of the coordination geometry is key to enhancement of the chiroptical responses of these compounds. More information can be found in the Research Article by Masahiro Ikeshita et al.     

电感耦合等离子体原子发射光谱（ICP-AES）法测定高镍铜液体样品中金、钯、铂

为实现中控液体物料中金、钯、铂元素的精准定量分析,为工艺生产定向富集和高效提取提供数据支持,本文建立了ICP—AES法测定中控冶炼系统中高镍铜液体样品中金、铂和钯3种元素含量的测定方法。确定了试液用碲共沉淀,贵金属进入滤渣,经火试金分离富集得到贵金属合粒,合粒经王水溶解后,于王水介质中在电感耦合等离子光谱仪上同时测定金钯铂的量。该方法金、铂、钯的测定范围为 0.014mg/L～5mg/L,回收率为92.2%～104.4%, RSD为3.21%～10.58%,方法满足高镍、铜液体样品中金、钯、铂元素的测定。