Preparation and properties of isobutylene–isoprene rubber–clay nanocomposites

Isobutylene isoprene rubber (IIR)‐clay nanocomposites have been prepared successfully by melt intercalation with maleic anhydride‐grafted IIR (Ma‐g‐IIR) and organophilic clay. In IIR‐clay nanocomposites, the silicate layers of the clay were exfoliated and dispersed into the monolayer. The nanocomposites exhibited greater gas barrier properties compared with those of Ma‐g‐IIR. When 15 phr clay was added, gas barrier properties were 2.5 times greater than those of Ma‐g‐IIR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1182–1188, 2006     

Surface characterization and barrier properties of plasma‐modified polyethersulfone/layered silicate nanocomposites

This study describes the preparation of polyethersulfone (PES)/layered silicate nanocomposites (PLSNs) by mixing PES polymer chain into organically‐modified layered silicate in 1‐methyl‐2‐pyrrolidinone (NMP) solution. Both X‐ray diffraction data and transmission electron microscopy images of PLSNs indicate that the silicate layers were almost exfoliated and randomly distributed into the PES matrix. The mechanical and barrier properties of PLSNs show remarkable enhancement in the storage modulus and water/oxygen permeability when compared with that of neat PES matrix. Surfaces modification of PES and PLSN films with various treated times, system pressures, and radio frequency (RF) powers were performed using a mixture of oxygen (O₂) and nitrogen (N₂) plasmas. The topographical and physical properties of plasma‐modified PES and PLSN surfaces were investigated using scanning probe microscopy (SPM), contact‐angle measurements, and X‐ray photoelectron spectroscopy (XPS). These results indicate that the surface roughness of PLSNs with the same condition of plasma modification is lower than that of neat PES matrix and is probably due to the increase of stiffness with the presence of inorganic layered silicates in PES matrix. The surface properties of the PES and PLSNs are also changed from hydrophobic to hydrophilic. The XPS spectra suggest that the exposure of the PES and PLSNs to the plasmas led to the combination of etching reactions of polymer surface initiated by plasma and the following addition reactions of new oxygen‐ and nitrogen‐containing functional groups onto polymer surfaces to change their surface properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3185–3194, 2006     

铅在铂电极上的还原电位溶出分析法

研究了以亚铁氰化钾为还原剂铅在铂电极上的还原电位溶出法；讨论了电极的预处理、阳极富集和随后的还原电位溶出及铅测定的干扰。     

纳米PbSnO3的制备及其燃烧催化性能的研究

Nanocomposite PbSnO₃was synthesized by coprecipitation method , and its phase evolution process was investigated. The particle size, crystal form, and phase of samples were determined with XRD, TEM and EDS. The catalytic actiyity of sample on the thermal decomposition of RDX was investigated by DSC. The results show that nanocomposite PbSnO₃with the diameter of 9 nm can be obtained by calcining at 600 ℃ for 2 h, which crystal is cubic (pyrochlore type). The catalytic actiyity of nanocomposite PbSnO₃on the thermal decomposition of RDX is much higher than that of normal PbSnO₃. The nanocomposite PbSnO₃can decrease the peak temperature of thermal decomposition of RDX from 240.1 ℃ to 236.5 ℃, and the decomposition enthalpy ΔH of RDX increases 722 J·g^-1 （about 70%）.     

脲基苯乙炔4-′(对甲基苯基)-6-苯基-2,2′-二联吡啶铂(II)络合物的合成

本文通过异氰酸酰化反应合成了含有脲基的苯乙炔新型配体及以它作为辅助配体的4′-(对甲基苯基)-6-苯基-2,2′-二联吡啶铂(II)络合物,初步研究了铂(II)络合物的光物理性质,发现由于脲基的存在,当浓度大于3.32×10-5mol/L时铂(II)络合物能够发生分子间簇集.     

On the effect of montmorillonite in the curing reaction of epoxy nanocomposites

The procedure for the fabrication of epoxy-based polymer layered silicate nanocomposites is important in respect of the nanostructure that is developed. To further our understanding of this, the influence of an organically modified clay (montmorillonite, MMT) on the curing kinetics of an epoxy resin has been studied by differential scanning calorimetry. Clay loadings of 10 and 20 mass% are used, and isothermal as well as dynamic cures have been investigated. For both cure schedules the effect of the MMT is to advance the reaction. Kinetic analysis yields values for the activation energy, but shows that the reaction cannot be described simply by the usual autocatalytic equation. The glass transition of the cured nanocomposites is lower than that for the cured neat resin, a result that is attributed to homopolymerisation taking place in addition to the epoxy–amine reaction.     

Silica hybrid nanocomposites

In this work we present experimental results about the formation, properties and structure of sol — gel silica based biocomposite containing Calcium alginate as an organic compound. Two different types of silicon precursors have been used in the synthesis: tetramethylortosilicate (TMOS) and ethyltrimethoxysilane (ETMS). The samples have been prepared at room temperature. The hybrids have been synthesized by replacing different quantitis of the inorganic precursor with alginate. The structure of the obtained hybrid materials has been studied by XRD, IR Spectroscopy, EDS, BET and AFM. The results proved that all samples are amorphous possessing a surface area from 70 to 290 m²/g. It has also been established by FT IR spectra that the hybrids containing TMOS display Van der Walls and Hydrogen bonding or electrostatic interactions between the organic and inorganic components. Strong chemical bonds between the inorganic and organic components in the samples with ETMS are present. A self-organized nanostructure has been observed by AFM. In the obtained hybrids the nanobuilding blocks average in size at about 8–14 nm for the particles.     

Photobioelectronic studies with thylakoid membranes

The research described in this paper presents a method for chemically modifying the surface of plant photosynthetic membranes in such a way that electrical contact can be made. Colloidal platinum was prepared, precipitated directly onto thylakoid membranes from aqueous solution, and entrapped on fiberglass filter paper. This composition of matter was capable of sustained simultaneous photoevolution of hydrogen and oxygen when irradiated at any wavelength (400–700 nm) in the chlorophyll absorption spectrum. Experimental data support the interpretation that part of the platinum metal catalyst is precipitated adjacent to the photosystem-I reduction site of photosynthesis and that electron transfer occurs across the interface between photosystem I and the catalyst. When contacted with metal electrodes, the thylakoid-platinum combination was capable of generating a sustained flow of current through an external load resistor. Procedures for preparing this material and experimental data on its catalytic and electronic properties are presented. Also presented is an analysis of the flow of photocurrent in terms of the interfacial electron transfer reactions that occur at the interfaces of the components of the assembly.     

碳化钨负载S2O8^2-/ZrO2固体超强酸催化剂上的正戊烷反应研究

首次研究了碳化钨负载S2 O2 -8 ZrO2 (PSZ)固体超强酸催化剂 (WC PSZ)上正戊烷的反应情况及影响催化剂活性的各种因素 ,并用GC MS ,XRD ,BET等手段分析了正戊烷反应产物和催化剂的物理化学性质等 .结果表明 :WC PSZ对正戊烷具有异构化和裂解的双重催化作用 .PSZ在负载适量碳化钨后对正戊烷反应的活性和选择性显著提高 ,显示出优于Pt PSZ催化剂的效果 ,碳化钨的负载量为 2 0 %的效果最佳 .适当的焙烧、活化和反应温度等条件是取得良好反应效果的关键