Experimental investigation on large deflection response of a frame impacted by a moving body

This paper reports on the experimental investigation of the dynamic large deflection response of a portal frame impacted at its midspan by a body moving at a certain speed. Both the deflection and velocity vs. time curves of the midspan and the dynamic history of a number of desired locations were recorded during the process of response. On the basis of the test data, the momentum and kinetic energy conversion between the frame and the moving body in the impact process are realized, and the occurrence and expansion of plastic regions are described. Investigation results show that the initial collision is approximately ideally inelastic, and that the elastic deformation plays a considerable role in the response though the input energy is much larger than the maximum elastic energy capacity of the beam member; therefore, in a general impact, the energy ratio should not be regarded as a sufficient criterion for a rigid—plastic solution. The ratios of the impulse transferred to and the energy absorbed by the frame in the initial collision to that carried by the moving body before impact is only related to the ratiobetween the equivalent mass of the frame paticipating in the initial collision and the mass of the impacting body, having nothing to do with the impacting velocity to a certain extent.     

JD树脂刻蚀及涂层的XPS研究

ＪＤ光学树脂表面刻蚀过程的ＸＰＳ研究表明，引进树脂遥ＣＯＨ，Ｃ＝Ｏ，Ｃ－ＳＯ３Ｈ，ＣＯＯＨ等基因随刻蚀温度的提高或时间的延长而增加，对其相对含量进行了计算，固化后的耐磨涂层具有ＳｉＯ２结构，ＪＤ板材的最佳刻蚀条件为２０℃，２０ｍｉｎ。     

Enhancement of the light-scattering ability of coatings by using hollow pigments

The light-scattering properties of coatings based on monodisperse polymeric spheres of two different diameters (ca 0.5 and 1 m) were evaluated from reflectance measurements as a function of the wavelength from 400 to 700 nm. Some of these plastic pigments were hollow and it was noted that these particles gave coatings with a greater light-scattering ability than coatings based on solid particles of a similar size. It was possible to estimate the contribution of the internal pores to the scattering ability of the coating layers by saturating the layers with an oil of a refractive index similar to that of the polymeric pigment particles. A simple model accounting for the scattering provided by the internal pores of the hollow particles is suggested. The agreement between the experimental results and the prediction of the model is fair. It was noted that the light scattering coefficient of the coatings increased when the external diameter of their constituent hollow particles increased from ca 0.5 to 1 m.     

超高效合相色谱法快速检测塑料食品接触材料中13种紫外吸收剂

建立了一种同时检测塑料食品接触材料中13种紫外吸收剂的超高效合相色谱法。以甲醇为溶剂对塑料食品接触材料样品进行超声提取，经C18固相萃取柱净化，过0.22 μm有机滤膜，采用超高效合相色谱仪分析。选择ACQUTY UPC² HSS C18 SB色谱柱（150 mm×3.0 mm，1.8 μm），以超临界二氧化碳为流动相，异丙醇为改性剂进行梯度洗脱，在最优色谱条件下，13种紫外吸收剂能够在4 min内实现有效分离。结果表明，在各自线性范围内，13种紫外吸收剂的线性关系良好，标准曲线相关系数不低于0.9985，检出限（S/N=3）为0.05~0.15 mg/kg，加标回收率为86.8%~115.7%，相对标准偏差为0.73%~5.61%。该方法快速简便，准确可靠，同时大大减少了有机溶剂的消耗，可用于塑料食品接触材料中13种紫外吸收剂的快速检测。     

阳极溶出伏安法测定塑料制品中的铜和铅

铅等重金属的化合物常用作塑料的稳定剂。由于铅等重金属对人体有害,因此研究塑料制品中铅、铜含量对人体健康的影响是环境卫生学急待解决的问题。本文介绍的方法中,0.5M HCl既作为干法灰化塑料残渣的溶解液,同时又是测定铜、     

Agro-industrial waste enzymes: Perspectives in circular economy

According to the Food and Agriculture Organization of the United Nations, approximately 1.3 billion tons of food is wasted each year, equivalent to approximately one-third of world production. Agri-food wastes are the source of proteins, carbohydrates, lipids, and other essential minerals that have been exploited for value-added products by the development of biorefineries and sustainable business as important elements of circular economies. The innovation and materialization of these types of processes, including the use of disruptive technologies on microbial bioconversion and enzyme technology, such as nanotechnology, metabolic engineering, and multi-omics platforms, increase the perspectives on the waste valorization process. Lignocellulolytic enzymes, pectinases, and proteases are mainly used as catalyzers on agri-food waste treatment, and their production in house might be the trend in near future for agro-industrial countries. Another way to transform the agri-food wastes is via aerobic or anaerobic microbial process from fungal or bacterial cultures; these processes are the key to produce waste enzymes.     

Mechanical behaviour of biodegradable agricultural films under real field conditions

The mechanical behaviour of various types of biodegradable materials depends on their chemical composition and additives, the processing characteristics and the application conditions. The environmental conditions during storage and usage of these materials strongly influence their mechanical properties and behaviour. Ageing and degradation during the useful lifetime of biodegradable agricultural films causes losses in the mechanical performance of the material, as measured by monitoring the evolution of some of the critical mechanical properties. Such losses may be comparable to the corresponding losses of the conventional polyethylene agricultural films due to ageing, or they may be more drastic. In the present paper, the overall mechanical and ageing/degradation behaviour of experimental specially designed and manufactured low-tunnel and mulching biodegradable films, exposed to full-scale field conditions is analysed. Selected critical mechanical properties of these films manufactured with different grades of Mater-Bi material and additives, different thickness and processing schemes and exposed to real cultivation conditions in four different locations in Europe are investigated in the laboratory and compared against the corresponding behaviour of conventional agricultural films at various stages of their exposure time.     

A novel process for anaerobic composting of municipal solid waste

A novel process has been developed and evaluated in a pilotscale program for conversion of the biodegradable fraction of municipal solid waste (MSW) to methane via anaerobic composting. The sequential batch anaerobic composting (SEBAC) process employs leachate management to provide organisms, moisture, and nutrients required for rapid conversion of MSW and removal of inhibitory fermentation products during start-up. The biodegradable organic materials are converted to methane and carbon dioxide in 21–42 d, rather than the years required in landfills.     

A finite volume cell‐centered Lagrangian hydrodynamics approach for solids in general unstructured grids

A finite volume cell‐centered Lagrangian hydrodynamics approach, formulated in Cartesian frame, is presented for solving elasto‐plastic response of solids in general unstructured grids. Because solid materials can sustain significant shear deformation, evolution equations for stress and strain fields are solved in addition to mass, momentum, and energy conservation laws. The total stress is split into deviatoric shear stress and dilatational components. The dilatational response of the material is modeled using the Mie‐Grüneisen equation of state. A predicted trial elastic deviatoric stress state is evolved assuming a pure elastic deformation in accordance with the hypo‐elastic stress‐strain relation. The evolution equations are advanced in time by constructing vertex velocity and corner traction force vectors using multi‐dimensional Riemann solutions erected at mesh vertices. Conservation of momentum and total energy along with the increase in entropy principle are invoked for computing these quantities at the vertices. Final state of deviatoric stress is effected via radial return algorithm based on the J‐2 von Mises yield condition. The scheme presented in this work is second‐order accurate both in space and time. The suitability of the scheme is evinced by solving one‐ and two‐dimensional benchmark problems both in structured grids and in unstructured grids with polygonal cells. Copyright © 2013 John Wiley & Sons, Ltd.     

The U.S. Department of Energy (DOE) Sampling and Analytical Chemistry Guide: Doe Methods for Evaluating Environmental and Waste Management Samples

Abstract

DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a guidance/methods document to support sampling and analysis activities at DOE sites. DOE Methods is intended to supplement existing guidance documents (e.g., EPA's Test Methods for Evaluating Solid Waste, SW-846), which generally apply to low-level or nonradioactive samples. DOE Methods targets the complexities of DOE radioactive mixed waste and environmental samples. The document contains quality assurance (QA), quality control (QC), safety, sampling, organic analysis, inorganic analysis, and radioanalytical guidance as well as sampling and analytical methods. An addendum is distributed every six months (April and October) with updated guidance and additional methods.

DOE Methods provides a vehicle for technology transfer within the environmental restoration (ER) and waste management (WM) (collectively known as EM) community. As DOE Methods evolves, its usefulness and applicability are anticipated to grow to meet the demands of the DOE/EM mission. At the present time, DOE Methods contains methods and guidance information supplied by DOE sites. Because the EM activities in DOE are not unique to the United States, the international environmental community could benefit from the information gathered for the DOE program. This information could provide additional resources for their EM activities.