SnCl2-mediated carbonyl allylation in fully aqueous media

Systematic studies were performed on SnCl₂-mediated carbonyl allylation reaction between aldehydes and allyl halides in fully aqueous media. Totally three valuable reaction systems were discovered, which were SnCl₂/CuCl₂, SnCl₂/TiCl₃, and SnCl₂/PdCl₂. They all provided good to excellent yields in the allylation of aliphatic and aromatic aldehydes under very mild and convenient conditions. SnCl₂, by itself, was also found to be effective for the allylation reaction when allyl bromide was employed. However, the SnCl₂-only reaction could only tolerate very small amount of water as the solvent. The SnCl₂/CuCl₂, SnCl₂/TiCl₃, and SnCl₂/PdCl₂-mediated reactions exhibited good regioselectivity favoring the γ-adduct when cinnamyl halides were employed as the allylation reagent. The same reactions with cinnamyl halides also showed good diastereoselectivity favoring the anti-product. Mechanistic studies using proton NMR techniques suggested that the additive (i.e., CuCl₂, TiCl₃, PdCl₂) could accelerate the formation of allyltin intermediate, but this step was shown not to be the most important for the allylation. Thus we proposed that the Lewis acid catalysis effect exerted by the additive was the main reason for the observed reactivity enhancement.     

The Crystal Structure of Sr2TiSi2O8

Sr₂TiSi₂O₈ single crystals were grown by Czochralski pulling and from a high-temperature solution. X-ray diffractometry revealed the modulated crystal structure of Sr₂TiSi₂O₈ to belong to the 5D superspace group P4bm (−α, α, 1/2; α, α, 1/2) with α=0.3. Atomic positions, anisotropic displacement factors and positional modulation parameters for Sr₂TiSi₂O₈ are determined and discussed. The positional modulation is further investigated by electron diffraction and high-resolution transmission electron microscopy. In the latter experiments, the 2D modulation appears to be superimposed by some 1D modulation waves. This effect is discussed in terms of growth conditions.     

微量元素叶面肥料中硼的测定

研究了在 pH 6 .5乙酸铵缓冲溶液中 ,硼与 3 甲氧基 甲亚胺H的显色反应条件 ,最大吸收在 4 2 0nm处 ,摩尔吸光系数为 8.1× 10 3,硼含量在 0～ 10 μg/ 10ml范围内符合比耳定律。用于微量元素叶面肥料中硼的测定 ,获得了与国标法一致的结果     

Immobilization of α-amylase in vinyl-polymer-based interpenetrating polymer networks

Semi-interpenetrating polymer networks (IPNs) of poly(ethylene glycol), poly(vinyl alcohol) and polyacrylamide were prepared as a support for enzyme immobilization and kinetic studies were performed for the immobilization of -amylase. The effect of IPN composition on the extent of immobilization was investigated and the percentage of relative activity of the immobilized enzyme was evaluated as a function of the chemical architecture of the IPNs, pH and temperature, taking starch as a substrate. The kinetic constants and the maximum reaction velocity were also evaluated. The IPNs were characterized by IR spectral analysis.     

An investigation of heparinase immobilization

A systematic investigation of the parameters that affect the efficiency of immobilizing heparinase onto cyanogen bromide activated crosslinked 8% agarose beads was conducted. Two experimental measures, the “fraction bound” and the “fraction retained,” were used to monitor the coupling efficiency. The fraction bound is the portion of the total initial enzyme that is bound to the agarose gel. The fraction retained is the fraction of bound enzyme that is active. The product of the two measures indicates the coupling efficiency. The activity of the immobilized heparinase was measured under conditions free of both internal and external mass transfer limitations, and thus, the fraction retained represents the true immobilized enzyme activity. Increasing the degree of activation of the beads results in an increase in the fraction bound, the fraction retained, and consequently, the coupling efficiency. As the ratio of enzyme solution to gel volume increases from 1.5 to 2.2, the fraction bound remains constant but the fraction retained decreases (heparinase concentration; 0.15 mg/mL and degree of activation; 9.5 μmol of cyanate esters/g of gel). At volume ratios greater than 2.2, both the fraction bound and the fraction retained decline continuously. Changing the heparinase concentration in the coupling solution changes the coupling efficiency in a manner similar to that of the volume ratio change. When heparin is added during the coupling process, the fraction bound declines as the heparin concentration increases, whereas the fraction retained increases up to a heparin concentration of 12 mg/mL and decreases thereafter. When arginine, lysine, and glycine are used to block the unreacted cyanate ester groups after the coupling process, the immobilized heparinase shows different pH optima of 6.5, 6.9, and 7.2, respectively. Based upon these findings, a protocol to optimize heparinase immobilization is developed.     

Modular design of icosahedral metal clusters

The concept of crystalline module, that is, an unambiguously isolated, repeated quasi-molecular element, is introduced. This concept is more general than the concept of crystal lattice. The generalized modular approach allows extension of the methods and principles of crystallography to quasi-crystals, clusters, amorphous solids, and periodic biological structures. Principles of construction of aperiodic, nonequilibrium regular modular structures are formulated. Limitations on the size of icosahedral clusters are due to the presence of spherical shells with non-Euclidean tetrahedral tiling in their structure. A parametric relationship between the structures of icosahedral fullerenes and metal clusters of the Chini series was found.     

Synthesis and properties of the Co7Se8−xSx and Ni7Se8−xSx solid solutions

We report the synthesis and elementary properties of the Co₇Se_8−xS_x (x=0-8) and Ni₇Se_8−xS_x (x=0-7) solid solutions. Both systems form a NiAs-type structure with metal vacancies. In general, the lattice parameters decrease with increasing x, but in the Ni₇Se_8−xS_x system c increases on going from x=5 to 7. Magnetic susceptibility measurements show that all samples exhibit temperature-independent paramagnetism from 25-250 K. Samples within the Co₇Se_8−xS_x system, as well as Ni₇Se₈ and Ni₇SeS₇, were found to be poor metals with resistivities of ∼0.20 and ∼0.06 mΩ cm at 300 K, respectively. The Sommerfeld constant (γ) was determined from specific heat measurements to be ∼13 mJ/mol_CoK² and ∼7 mJ/mol_NiK² for Co₇Se_8−xS_x and Ni₇Se_8−xS_x, respectively.     

Komplexe von Vanadium und Titan mit Salicylaldehyd-benzoylhydrazon und 2-(2′-Hydroxyphenyl)-chinolin-8-ol. Kristallstruktur von μ-Oxo-bis[oxo{2-(2′-Hydroxyphenyl)-chinolin-8-olato(2-)}-vanadium(V)]

Complexes of Vanadium and Titanium with Salicylaldehyde benzoylhydrazone and 2-(2′-Hydroxyphenyl)-8-quinolinol. Crystal Structure of μ-Oxo-bis[oxo{2-(2′-hydroxyphenyl)-8-quinolinato(2-)}-vanadium(V)] . By reaction of titanium(IV)-isopropoxide and bis(acetylacetonato)-oxovanadium(IV) with salicylaldehyde benzoylhydrazone and 2-(2′hydroxyphenyl)-8-quinolinol, respectively, the metal complexes of the tridentate diacidic ligands were synthesized and characterized mass spectrometrically. The mass spectra of the titanium compounds correspond to the expected bisligand complexes whereas several species are demonstrable in the case of vanadium. Crystals of μ-oxo-bis[oxo{2-(2′-hydroxyphenyl)-8-quinolinolato(2-)}-vanadium(V)] were isolated and characterized by X-ray structural analysis. The complex exhibits C₂ symmetry, accordingly the μ₂-oxygen atom is situated on the 4 axis. The VOV bridge is angular with the unusually small bond angle of 107.3°. The coordination polyhedron is distorted octahedral. The compound additionally contains one molecule of chloroform per formula unit which is disordered in two positions. Crystallographic data see “Inhaltsübersicht”.     

Synthesis and X-ray structural analysis of a unique Co-crystallization complex of [NaSal]2DB24C8 and [KSal]2DB24C8

Sodium salicylate (NaSal where Sal=2-hydroxybenzoate), when mixed with dibenzo-24-crown-8 (DB24C8) yields a bimetallic complex [NaSal]₂DB24C8 in most polar organic media, while potassium salicylate (KSal) under similar conditions shows a tendency to yield 11 or 21 complexes depending upon medium or synthesis. However, the presence of both NaSal and KSal together results in a unique mixed cation complex of composition NaKSal₂DB24C8. This product melts sharply (190-92°C) without decomposition, displays IR spectral characteristics comparable to those of [Na(Sal)]₂DB24C8, and is stable in aqueous media as shown by the detectable cation effect on the UV absorption bands of Sal and DB24C8. Single crystal X-ray analysis of NaK(Sal)₂DB24C8 reveals that the system represents a co-crystallization complex of individual (KSal)₂DB24C8 and (NaSal)₂DB24C8 molecules. The crystals are monoclinic,P2₁/c,a=19.976(2) Å,b=9.031(1) Å,c=25.541(5) Å,=122.065(9)°, ų,T=298 K,Z=2+2, CuK =1.5418 Å, and 2 (2.5°–100°). FinalR factor for the 3012 observed reflections (F>3) is 0.092. Both the Na₂- and K₂-molecules possess crystallographic centers of symmetry with one metal and its associated anion on each side of the crown ring. However, the conformations of the crowns are very different in the two molecules, with the K₂-crown being nearly planar and the Na₂-crown being quite puckered. Four oxygen atoms from the DB24C8 (KO, 2.680–2.908 Å) and three carboxyl oxygen atoms (KO, 2.472–2.708 Å) from separate salicylate ions coordinate with each potassium. Three oxygens from the crown (NaO, 2.536–2.65 Å) and three carboxyl oxygens (NaO, 2.31–2.563 Å) coordinate with each sodium. The salicylate ions lie on opposite sides and nearly perpendicular (77.2°, Na₂-molecule; 82.7° K₂-molecule) to each crown but coordinate to both of the metal ions within a molecule. The K⁺K⁺ and Na⁺Na⁺ distances in the respective molecules are 3.95 and 3.34 Å. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82044 (18 pages).     

Eco-dyeing and functional finishing of wool fabric based on Portulaca oleracea L. as colorant and Musa basjoo as natural mordant

Biomass energy is the most acknowledged renewable resource due to its universality, richness, and renewability. This study utilized a Portulaca oleracea L. plant as a natural colorant for wool fabric dyeing with a high color yield at optimum extraction and dyeing conditions. To evaluate the dyeing mechanism and feasibility of the extracted dyes, we analyzed and characterized the molecular structure and nano-level particle size. The dyeing kinetics and the morphology of dyed fabrics were integratedly explored; the adsorption process of wool fabric on natural colorant molecules was increasingly in line with the pseudo-second-order kinetic adsorption model. Further, the dyeing effects of wool fabrics were compared to that of Musa basjoo mordant and synthetic dyes to confirm the superior color depth (K/S value 23.53), biological function as anti-ultraviolet (UPF value 253.47), and anti-bacterial activity (antibacterial rate of Staphylococcus aureus/Escherichia coli was 71.3%/37%). Our findings provide a feasible scheme for providing deep color and biological activity to wool fabrics. This has broad application prospects in the field of eco-friendly textile materials.