Micellization of Alkyltriphenylphosphonium Bromides in Ethylene Glycol and Diethylene Glycol + Water Mixtures: Thermodynamic and Kinetic Investigation

The thermodynamics of micellization and other micellar properties of alkyl- (C₁₀-, C₁₂-, C₁₄- and C₁₆-) triphenylphosphonium bromides in water + ethylene glycol (EG) (0 to 30% v/v) mixtures over a temperature range of 298 to 318 K and cetyltriphenylphosphonium bromide in water + diethylene glycol (DEG) mixtures (0 to 30% v/v) at 298 K have been studied conductometrically. In all cases, an increase in the percentage of co-solvent results in an increase in the cmc values. On the basis of these results, the thermodynamic parameters, the Gibbs energy (ΔG _m^o), enthalpy (ΔH _m^o) and entropy (ΔS _m^o) of micellization have been evaluated. In addition to the conductivity measurements, kinetic experiments have also been done to determine the dependence of observed rate constant for the nucleophilic substitution reaction of p-nitrophenyl acetate and benzohydroxamate ions in the presence of the surfactant cetyltriphenylphosphonium bromide with a varying concentration of EG and DEG ranging from 0 to 50% v/v at pH=7.9 and 300 K. All of the reactions followed pseudo-first-order kinetics. An increase in the surfactant concentration results in an increase in the reaction rate and for a given surfactant concentration, the rate constant decreases as the concentration of co-solvent in the mixture increases. The kinetic micellar effects have been explained by using the pseudophase model. The thermodynamic and structural changes originating from the presence of solvents control the micellar kinetic effects.     

Electrochemical behavior of phenol at acetylene black-dihexadecyl hydrogen phosphate composite modified glassy carbon electrode in the presence of cetyltrimethylammonium bromide

The electrochemical response of phenol at acetylene black (AB)-dihexadecyl hydrogen phosphate (DHP) composite modified glassy carbon electrode in the presence of cetyltrimethylammonium bromide (CTAB) was investigated. In this system, a sensitive oxidation peak at 0.62 V (SCE) was obtained. The electrode process and the influence of CTAB on the oxidation of phenol were explored by chronocoulometry and linear sweep voltammetry (LSV). Experimental conditions for the determination of phenol were optimized. In the range of 5.0 × 10⁻⁷ to 1.2 × 10⁻⁵ M, the phenol concentration was linear with the oxidation peak current and the detection limit was found to be 1.0 × 10⁻⁷ M for 3 min accumulation. The method was applied for the determination of phenol in lake water and the results were satisfactory. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 2, pp. 222–229. The text was submitted by the authors in English.     

单分子链胶束的胶束化行为与相关新概念的提出

采用水溶液均聚合方法,制备了阳离子型表面活性单体（2-丙烯酰胺基）乙基十四烷基二甲基溴化铵（AMC14AB）的均聚物,使用荧光探针法、表面张力测定及电导测定法,重点考察了均聚物P（AMC14AB）在水溶液中的胶束化行为与表面吸附现象．在水溶液中,均聚物P（AMC14AB）呈现单分子链胶束的聚集形态,具有零临界胶束浓度（CMC=0）,从开始加入P（AMC14AB）起,水溶液中随即产生单分子链胶束,不存在Krafft温度．P（AMC14AB）在溶液表面也发生表面吸附,使水的表面张力下降,即P（AMC14AB）也具有表面活性;随着浓度增大,表面吸附量增大,水的表面张力持续下降;当表面吸附达到饱和时,表面张力一浓度曲线上出现突变点,该点应该定义为饱和的表面吸附浓度（SSAC）,而不应该再称为临界胶束浓度．P（AMC14AB）单分子链胶束溶液对疏水有机物（甲苯）的增溶情况,明显不同于普通小分子表面活性剂十六烷基二甲基溴化铵（CTAB）的多分子胶束溶液,甲苯增溶量-P（AMC14AB）浓度的关系曲线上无突变点,而且对甲苯的增溶能力高于CTAB的多分子胶束溶液．     

聚氯乙烯膜碘离子选择电极在溴碘离子共存体系分析中的应用

介绍了聚氯乙烯膜碘离子选择电极(PVC-I-ISE)的制备方法,电极对碘离子的能斯特响应斜率为59 mV/pI,响应的线性范围为4.0×10-5~1.0×10-2mol.L-1,检出限为1.6×10-5mol.L-1,低于用银ISE的检出限,电极的使用寿命为一个月以上。将制备的碘离子选择电极作为指示电极用于对溴、碘混合离子体系进行连续分别电位滴定,并与以银电极为指示电极的电位滴定方法进行了比较。结果表明用PVC-I--ISE作指示电极,可在I--Br-共存的混合溶液中进行两离子的连续电位滴定,而用银-ISE时则不能。     

High-sensitive analysis of DNA fragments by capillary gel electrophoresis using transient isotachophoresis preconcentration and fluorescence detection

In this report aimed on further development of a high-sensitivity capillary gel electrophoresis (CGE) method for analysis of DNA fragments, we firstly explored online transient isotachophoresis (tITP) preconcentration combined with fluorescence detection (FD). The fluorescence signal (excitation: 488 nm; emission: 590 nm) was generated using the intercalating dye of ethidium bromide (EB). It was found when the leading electrolyte (LE) was injected behind the sample zone, such a special tITP mode has significant advantages to solve the bubble formation issue and to improve the analytical performance stability. Two standard DNA samples, a 50 bp DNA step ladder and the φX174/HaeIII digest, were used to evaluate the qualitative and quantitative abilities of the tITP-FD approach. A highly diluted sample (10,000-fold in the water, e.g. the φX174/HaeIII digest diluted from 500 μg/ml to the 50 ng/ml level) was enriched and detected; the LOD was down to 0.09 ng/ml for the 72 bp fragment, apparently improved more than 1000-fold in comparison with UV detection. Although the RSD of peak areas (n = 3) was around 15.5% for the sample was electrokinetically injected, good linearity of peak area response showed that the proposed method is suitable for quantitative analysis.     

溴化锌-季(鎓)三溴盐催化二氧化碳和环氧化合物偶联反应

研究了溴化锌-季鎓三溴盐催化二氧化碳和环氧化合物偶联反应,考察了反应温度、压力和不同金属盐对反应的影响以及催化剂的循环使用性能.结果表明,在413 K和1.0 MPa条件下,以溴化锌为催化剂,苯基三甲基三溴化铵为共催化剂,无需加入任何溶剂就可以使二氧化碳和环氧化合物发生偶联反应,并以很高的收率得到环碳酸酯.     

荧光光谱法研究十六烷基三甲基溴化铵与牛血清白蛋白的相互作用

十六烷基三甲基溴化铵;牛血清白蛋白;结合反应;热力学参数;荧光光谱     

Velocity map imaging of the photolysis of n-C4H9Br in UV region

Using velocity map ion imaging technique, the photodissociation of n-C₄H₉Br in the wavelength range 231–267 nm was studied. The results and our ab initio calculations indicated that the absorption of n-C₄H₉Br in the investigated region originated from the excitations to the lowest three repulsive states, as assigned as 1A″, 2A′ and 3A′ in C_s symmetry. Dissociations occurred on the PES surfaces of the three states, terminating in C₄H₉+Br (²P_3/2) or C₄H₉ + Br^* (²P_1/2) as two channels, and being impacted by an avoided crossing between the PES surfaces of the 2A′ and 3A′ states. The transition dipole to the 1A″ state was perpendicular to the symmetry plane, so perpendicular to the C–Br bond. The transitions to the 3A′ state was polarized parallel to the symmetry plane, and also parallel to the C–Br bond. While the transition dipole to the 2A′ state was in the symmetry plane, but formed an angle of about 53.1° with the C–Br bond. We have also determined the avoided crossing probabilities, which affected the relative fractions of the individual pathways, for the photolysis of n-C₄H₉Br near 234 nm and 267 nm.     

Chromogenic reaction of bromopyrogallol red with tri- and hexavalent chromium in the presence of cetyltrimethyl ammonium bromide and its application in Cr speciation

The coordination reactions of bromopyrogallol red (BPR) with tri- and hexavalent chromium in the presence of cetyltrimethylammonium bromide (CTAB) have been studied by absorption spectrometry. Results show that the reactions of Cr(VI) and Cr(III) with BPR in the absence or presence of CTAB have different temperature dependences. The reaction mechanism of Cr(VI) is that Cr(VI) is first reduced by BPR to Cr(III) and then the Cr(III) produced reacts with BPR. Based on the study on the coordination reactions and the effects of surfactants upon them, a simple, rapid, sensitive and accurate method for Cr speciation has been developed. Over the range of 0–8 g Cr(VI) or 0–12g Cr(III) per 25ml final volume, the calibration curve is linear with a detection limit of 3.5 × 10^–7 mol/1 for Cr(VI) or 4.4 × 10^–7 mol/1 for Cr(III).     

Convenient and Scalable Synthesis of 2,3-Dihydroquinazolin-4(1H)-one Derivatives and Their Anticancer Activities

An efficient and mild InBr₃-catalyzed approach to synthesize 2,3-dihydroquinazolin-4(1H)-one derivatives (3a–3aa) has been developed. Notably, all the products were isolated by recrystallization and the reaction is accessible on a gram scale. Moreover, the reactions only require 10–60 min. All the synthesized compounds were evaluated for their in vitro anticancer activity against four human cancer cell lines.