Analytical solution to a mode of mixed elastohydrodynamic lubrication with mixed contact regimes: Part I. Without consideration of contact adhering layer in the inlet zone

In 2005, Zhang presented a Grubin-like inlet zone analysis to the isothermal line contact elastohydrodynamic lubrication under relatively heavy loads when the hydrodynamic film thickness in the Hertzian zone approaches zero and the EHL fluid is Newtonian [Zhang, Y.B. A justification of the load-carrying capacity of elastohydrodynamic lubrication film based on the Newtonian fluid model. Industrial Lubrication and Tribology, 2005, Vol. 57, pp. 224–232]. His results showed that in this EHL, when the rolling speed is lower than the characteristic rolling speed (U_ch =) 0.0372W^1.50/G, the Hertzian zone is in physical adsorbed layer boundary lubrication while the inlet zone is in conventional hydrodynamic lubrication. This mode of EHL represents a mode of mixed EHL with mixed contact regimes, where hydrodynamic films with different rheological behaviors occur in different areas of the contact. The present paper presents an analysis to this mode of mixed EHL by using the Grubin type method when the contact adhering layer in the inlet zone is neglected. Pressures, film thicknesses and load partition in the contact are obtained from this analysis. It is also found that the formula for the characteristic rolling speed U_ch = 0.0372W^1.50/G obtained by Zhang [Zhang, Y.B. A justification of the load-carrying capacity of elastohydrodynamic lubrication film based on the Newtonian fluid model. Industrial Lubrication and Tribology, 2005, Vol. 57, pp. 224–232] may be valid for the dimensionless load W > 1.0E−7, while it may be invalid for the dimensionless load W < 1.0E−8. In part II [Zhang, Y.B. Analytical solution to a mode of mixed elastohydrodynamic lubrication with mixed contact regimes: Part II. Considering the contact adhering layer effect in the inlet zone. Journal of Molecular Liquids, 2006, Vol. 117. (doi:10.1016/j.molliq.2006.04.007)] will be presented an analysis to other two modes of mixed EHL with mixed contact regimes for relatively heavy loads, low rolling speeds and Newtonian fluids, where the conventional hydrodynamic lubrication, physical adsorbed layer boundary lubrication and oxidized chemical layer boundary lubrication can simultaneously occur in the inlet zone while the oxidized chemical layer boundary lubrication or the fresh metal-oxidized chemical boundary layer dry contact occur in the Hertzian zone, considering the contact adhering layer effect in the inlet zone.     

低聚壳聚糖几何结构和物理化学属性的理论研究

运用密度泛函B3LYP/6-31G+(d)方法对gg构象的低聚壳聚糖进行了结构优化、频率计算和电子结构,并用更高精度的WB97XD/6-311+G(d,p)方法计算了平均结合能及零点能校正,分析了热力学性质.结果表明,由于低聚壳聚糖中的氢键作用,使其形成螺旋结构;聚合度的增加,使平均结合能随之下降,结构的稳定性增强;在降解过程中,均为放热反应,验证了利用降温来提高降解产率的实验的可行性;此外,聚合度的增加,使能隙减小且快速收敛于聚合度为7的6.99 eV,稳定的反应活性与实验相符;HOMO、LUMO的电子密度分布表明,化学活性集中在C2位的氨基、C6位的羟基以及链的两端位置.该结果对低聚壳聚糖模型的建立和低聚壳聚糖降解过程、活性位置以及物理化学属性的尺寸依赖等现象的研究有着指导意义.     

Using Short Wave Visible–Near Infrared Reflectance Spectroscopy to Predict Soil Properties and Content

In this study, short wave visible–near infrared reflectance spectroscopy was evaluated for prediction of diverse soil properties related to four different soil series of several regions in Jiangxi, China. A total of 240 soil samples were collected for the calibration (n = 168) and prediction (n = 72) sets. The used wavelength range of short wave visible–near infrared reflectance spectroscopy is 325–1075 nm. Partial least squares regression and back propagation neural network were used to develop models for soil properties such as organic matter and extractable forms of calcium, magnesium, and potassium. Performance of these models was also compared and analyzed. The input of back propagation neural network was the first six principal components resulted from the principal component analysis and the optimal number of latent variables obtained from partial least squares regression. The overall results showed that the performance of partial least squares regression model was inferior to all back propagation neural network models. The best prediction was obtained with latent variables as input of back propagation neural network model for organic matter (determination coefficient = 0.84 and relative predictive determinant = 2.38), which was classified as very good model predictions. The prediction of calcium, magnesium, and potassium was classified as fair (determination coefficient = 0.56–0.68 and relative predictive determinant = 1.51–1.61), where quantitative predictions were considered possible. It is recommended to adopt latent variables as input for back propagation neural network model predicting soil properties with short wave visible–near infrared reflectance spectroscopy. In conclusion, short wave visible–near infrared reflectance spectroscopy was variably successful in estimating soil properties and showed potential for substituting laboratory analyses.     

Sonochemical temperature controlled synthesis of pellet-, laminate- and rice grain-like morphologies of a Cu(II) porous metal–organic framework nano-structures

Nano-structures of the Cu(II) metal–organic framework, {Cu(BDT)(DMF)·CH₃OH·0.25DMF}_n (1), which BDT²⁻ is 1,4-benzeneditetrazolate, have been synthesized by the reaction of H₂BDT with Cu(NO₃)₂·6H₂O via ultrasonic irradiation in three different temperatures, which causes different morphologies. The products were characterized by IR spectroscopy, elemental analysis, scanning electron microscopy and X-ray powder diffraction. This study demonstrates that sonochemistry is a suitable method for preparation of metal–organic framework nano-structures and temperature is an effective parameter on morphologies of Cu(II) metal–organic framework nano-structures.     

An intelligent approach for engine fault diagnosis based on Hilbert–Huang transform and support vector machine

Based on the techniques of Hilbert–Huang transform (HHT) and support vector machine (SVM), a noise-based intelligent method for engine fault diagnosis (EFD), so-called HHT–SVM model, is developed in this paper. The noises of a sample engine under normal and several fault states are first measured and denoised by using the wavelet packet threshold method to initially lower the noise level with negligible signal distortion. To extract fault features of the engine, then, the HHT is selected and applied to the measured noise signals. A nine-dimensional vector, which consists of seven intrinsic mode functions (IMFs) from the empirical mode decomposition (EMD), maximum value of HHT marginal spectrum and its corresponding frequency component, is specified to represent each engine fault feature. Finally, an optimal SVM model is established and trained for engine failure classification by using the fault feature vectors of the noise signals. Cross-validation results show that the proposed noise-based HHT–SVM method is accurate and effective for engine fault diagnosis. Due to outstanding time–frequency characteristics and pattern recognition capacity of the HHT and SVM, the newly proposed HHT–SVM can be used to deal with both the stationary and nonstationary signals, and even the transient ones. In the view of applications, the HHT–SVM technique may be suggested not only to detect the abnormal states of vehicle engines, but also to be extended to other fields for failure diagnosis in engineering.     

On the existence of stable bundles with prescribed Chern classes on Calabi–Yau threefolds

We prove a case of the conjecture of Douglas, Reinbacher and Yau about the existence of stable vector bundles with prescribed Chern classes on a Calabi–Yau threefold. For this purpose we prove the existence of certain stable vector bundle extensions over elliptically fibered Calabi–Yau threefolds.     

裂缝性应力敏感油藏流固耦合的数值模拟

以裂缝各向异性全张量渗透率动态耦合渗流模型为基础,建立三维三相裂缝各向异性特低渗透油藏流固耦合数学模型,并运用模块化显示耦合迭代求解建立流固耦合渗流数值模拟方法,编制耦合求解程序.研究表明:对于裂缝性油藏,随着油藏开采过程中压力的变化,岩石变形和储层介质的各向异性应变特性使开发过程中多组裂缝的变形程度不同,引起裂缝渗透率的非线性变化,进而使油藏裂缝渗透率张量主值发生旋转,改变液流方向、影响油藏开发效果.     

锯齿型石墨烯带缺陷改性方法研究

采用基于密度泛函理论的非平衡格林函数, 对具有不同缺陷构型的锯齿型石墨烯带(zigzag graphene nanoribbon, ZGNR) 的输运性质进行了理论计算与模拟. 研究表明, 相同数目、 不同构型缺陷结构对ZGNR的导电特性将产生不同的影响. 如A-B构型双空缺对ZGNR电导的影响最为显著, 而A-A构型双空缺对其电导的影响最小. 更为重要的是, 当引入碳环构型缺陷时, ZGNR将被改性, 即由原本的金属性质转变为半导体性质, 为缺陷调控石墨烯导电特性提供了理论依据.     

Coulomb screening effects on the optoelectronic far-infrared properties of spatially separated few-layer graphene

We investigate the longitudinal optical conductivity of spatially separated few-layer graphene analytically and numerically. Each layer could be monolayer or bilayer graphene. The density–density correlation function has been screened by the dielectric function using the random phase approximation, which includes the inter-layer Coulomb coupling. In the presence of the potential function between the layers, the carrier densities in each layer can be tuned respectively. In these two-dimensional layered structures, the main contributions to the optical conductivity are from the intra- and inter-band transition channels in a same layer. In the infrared region, the Drude optical conductivity was observed by the unscreened intra-band transition process. But in the presence of the inter-layer Coulomb interaction, one peak structure of the optical conductivity is observed which can be modified by the dielectric environment. From the number of turning points and the turning positions, the carrier density, the Fermi wavevector, and the layered structure can be determined.