“多才多艺”的铁元素*

铁在自然界中含量丰富,化学性质活泼,能够形成多种应用广泛的物质及材料,富有发展潜力。简述了铁元素的发现与性质,并重点介绍了铁的功能与应用。其中铁的应用主要围绕铁及其化合物在医学治疗、能源材料和环境保护领域所发挥的重要作用进行了阐述。     

Synthesis,p-Nitrophenolate Complexation and Competitive Anion Signaling of Novel Calixpyrrole Dimer

A novel dimeric calixpyrrole has been synthesized. The dimer forms stable complexes with p-nitrophenolate ion with a concomitant reduction in extinction coefficient. The chromogenic anion is displaced by the addition of various anions like fluoride and acetate. Effective optical sensing of these anions is accomplished using the calixpyrrole dimer.     

Development of B‐doped Si multiple delta‐layer reference materials for SIMS profiling

B‐doped Si multiple delta‐layers (MDL) were developed as certified reference materials (CRM) for secondary ion mass spectrometry (SIMS) depth profiling analysis. Two CRMs with different delta‐layer spacing were grown by ion beam sputter deposition (IBSD). The nominal spacing of the MDL for shallow junction analysis is 10 nm and that for high energy SIMS is 50 nm. The total thickness of the film was certified by high resolution transmission electron microscopy (HR‐TEM). The B‐doped Si MDLs can be used to evaluate SIMS depth resolution and to calibrate the depth scale. A consistency check of the calibration of stylus profilometers for measurement of sputter depth is another possible application. The crater depths measured by a stylus profilometer showed a good linear relationship with the thickness measured from SIMS profiling using the calibrated film thickness for depth scale calibration. The sputtering rate of the amorphous Si thin film grown by sputter deposition was found to be the same as that of the crystalline Si substrate, which means that the sputtering rate measured with these CRMs can be applied to a real analysis of crystalline Si. Copyright © 2005 John Wiley & Sons, Ltd.     

TiO2/Eu-MCM纳米超分子材料的组装和光催化性能

利用有机相-水相界面共沉淀溶胶支持自组装方法制备粒径为15 nm、孔径为8 nm的分子筛Eu-MCM, 它拥有734 m²/g的比表面积和1.49 cm³/g的比孔容. 把TiO₂组装到Eu-MCM的孔道中, 组装成TiO₂/Eu-MCM纳米复合材料. XRD, RAMAN和选区电子衍射花样分析表明纳米复合材料中的TiO₂为锐钛型. TiO₂/Eu-MCM的发光表现为Eu^3＋离子的特征光谱, 激发峰分别为342 (⁵L₁₀), 358 (⁵L₉), 378 (⁵L₇), 390 (⁵L₆), 411 (⁵D₃), 462 (⁵D₂)和524 (⁵D₁) nm; 发射峰为579, 592, 613, 653和701 nm, 归属于⁵D₀→⁷F_J (J＝0, 1, 2, 3, 4)组态间的跃迁. 纳米复合材料的发光强度都要比Eu-MCM的发光强, 其中43%TiO₂/Eu-MCM的发光最强. 荧光和紫外漫反射结果表明客体TiO₂对主体分子筛存在能量传递效应. 在微弱的紫外灯光照射下, TiO₂/Eu-MCM纳米复合材料对苯酚的光催化氧化性能和其发光强度具有一定的相关性. 29%TiO₂/Eu-MCM的纳米复合材料拥有的比表面积、孔容和孔径分别为204 m²/g, 0.24 cm³/g和4.7 nm. 29%TiO₂/Eu- MCM对苯酚具有68%的最高光催化氧化产率和85%催化氧化选择性.     

Synthesis and characterizations of anion exchange organic-inorganic hybrid materials based on poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)

A series of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)-based organic-inorganic hybrid materials for anion exchange were prepared through sol-gel process of polymer precursors PPO-Si(OCH₃)₃. PPO-Si(OCH₃)₃ were obtained from the reaction of bromomethylated PPO with 3-aminopropyl-trimethoxysilane (A1110). These polymer precursors then underwent hydrolysis and condensation with additional A1110 to generate hybrid materials. The reaction to produce polymer precursors was identified by FTIR; while FTIR, TGA, XRD, SEM, as well as conventional ion exchange capacity (IEC) measurements were conducted for the structures and properties of the prepared hybrids. TGA results show that this series of hybrid materials possess high thermal stability; XRD and SEM indicate that the prepared hybrid materials are amorphous and the inorganic and organic contents show good compatibility if the ratio between them is proper. The IEC values of the hybrid materials due to the amine groups range from 1.13 mmol/gBPPO (material i) to 4.80 mmol/gBPPO (material iv).     

Hydrothermal Syntheses and Characterizations of Two One-dimensional Molybdenum 1,4-Butylenediphosphonates

1 INTRODUCTION Interest in metal phosphonate chemistry has in- creased in recent years, not only because of their rich structural chemistry[1～3] but also owing to their potential applications in catalysis, absorption and intercalation reaction[4～6]. The introduction of a se- cond metal-ligand component as a charge-compen- sating unit and structure-directing component into polyoxomolybdenum/oxovanadium organodi-phos- phonates has provided us a powerful method to syn- thesize this family o…     

立方介孔相含钇氧化硅的合成与表征

以低浓度的十六烷基三甲基溴化铵为结构导向剂,在碱性条件下通过水热法合成了具有立方结构的含钇Y MCM 48介孔分子筛材料。XRD测试表明当Y/Si<0.05时可以获得典型的长程有序介孔立方结构相,随Y/Si比的增加,晶胞参数的增大和红外吸收光谱(FTIR)的变化为Y进入介孔分子筛骨架中提供了有力证据。N2吸附-脱附实验给出这种立方介孔材料的BET表面积为1180m2·g-1,BJH平均孔径为3.4nm。紫外 可见漫反射光谱(UV vis)证明钇以一种六配位的形式存在。X射线光电子能谱(XPS)进一步证明钇以三价形式存在于立方介孔分子筛骨架中。     

泡沫铅对VRLA电池负极活性物质结构及性能影响

0引言随着36V/42V汽车电源系统的提出,新一轮汽车用电池的竞争不断加剧。从目前情况看,铅酸电池由于具有成本低廉,使用可靠,原材料来源丰富,铅回收率可高达98%等优点,因此成为电动车电源最实际的选择之一[1]。但作为电动车用电池,需要克服其比能量低、充电接受能力差和负极硫酸盐化等缺点。为此各国科学家开展了大量的研究工作。最近报道用铸造多孔体作为敞口铅酸电池的集流体,它的比表面积为14cm2·cm-3,正极活性物质利用率上升到50%,远高于传统的铸造板栅[2]。在铅酸电池集流体研究领域里另一个重大进步,就是以R V C(R etic-ulated V i…     

水相锌二次电池正极材料V2O5/C的电化学性能研究

采用溶胶－凝胶法合成了一种V₂O₅/C复合材料.扫描电镜（SEM）和红外光谱（FTIR）分析表明,这是一种外层V₂O₅胶体包覆内层乙炔分子的多孔复合材料.以V₂O₅/C作正极,锌片为负极,Zn(ClO₄)₂溶液为电解质组成水相锌二次电池,采用循环伏安（CV）和电化学阻抗谱（EIS）等方法研究发现:V₂O₅:C质量比为1:1时电极具有最好的电化学性能,电池开路电压达1.64 V; Zn^2＋能分别在1.01 V和1.26 V处分步嵌入V₂O₅/C结构中A、B两种位置,其嵌入电流密度峰值最高可达70 mA•g^－1,并且具有较好的循环充放电性能;在一定放电深度下,V₂O₅/C电极反应速率受Zn^2＋的扩散过程控制.     

可注射性骨组织工程支架材料不饱和聚磷酸酯的合成

以富马酸、1,2-丙二醇和三氯氧磷为起始原料,合成了主链重复结构单元中含不饱和双键的聚磷酸酯.FTIR及NMR研究表明.不饱和聚磷酸酯(UPPE)主链结构中含有富马酸二(1,2-丙二醇)酯(BPGF)的三种异构体.利用GPC研究了反应时间对聚合反应的影响,结果表明,延长反应时间有利于提高分子量,聚合物趋向于单分散性.反应18 h后,聚合物重均分子量达到5 956 g/mol,分散度为1.12.通过测定UPPE与N-乙烯基吡咯烷酮(NVP)的交联温度曲线,确定交联反应最高温度为41.14-82.30℃,固化时间在1.95-10.28 m in之间.