基于选择性模型组合的三维荧光光谱水质分析方法

为提高三维荧光光谱水质分析的精度,提出一种选择性模型组合方法,采用相关系数法对三维荧光光谱激发波长进行选择,并将被选中的激发波长下的荧光发射光谱水质分析子模型采用岭回归法进行模型组合,得到对水质指标的组合模型。以一组总有机碳(TOC)范围在3.41～125.35 mg·L-1,化学需氧量(COD)范围在22.80～330.60 mg·L-1的32个地表水和城市生活污水水样做为研究对象,对其三维荧光光谱220～400 nm范围内的10个激发波长采用上述方法进行选择,分别针对TOC和COD指标筛选出260,280,400 nm和220,280,400 nm各3个激发波长。采用部分最小二乘方法建立上述激发波长下荧光发射光谱水质分析子模型,根据岭回归法计算各子模型的组合系数,分别得到对TOC和COD指标的组合模型。实验结果表明：采用该方法得到的组合模型对TOC和COD两种指标的预测误差均方根(RMSEP)相比精度最高的单一荧光发射光谱子模型分别减小了15.4%和17.5%,相比未经模型选择的组合模型分别减小了6.1%和10.9%。     

Atomic force microscopy investigation of growth process of organic TCNQ aggregates on SiO2 and mica substrates

<正>Deposition patterns of tetracyanoquinodimethane(TCNQ) molecules on different surfaces are investigated by atomic force microscopy.A homemade physical vapour deposition system allows the better control of molecule deposition. Taking advantage of this system,we investigate TCNQ thin film growth on both SiO_2 and mica surfaces.It is found that dense island patterns form at a high deposition rate,and a unique seahorse-like pattern forms at a low deposition rate.Growth patterns on different substrates suggest that the fractal pattern formation is dominated by molecule-molecule interaction.Finally,a phenomenal "two-branch" model is proposed to simulate the growth process of the seahorse pattern.     

Control of device performances of phosphorescent white organic light-emitting diodes by managing charge transport properties of host materials

Interlayer-free phosphorescent white organic light-emitting diodes (PHWOLEDs) with a mixed-host emitting structure in red emitting layer were developed and device performances were investigated according to the host composition in the red emitting layer. Device performances could be effectively managed by a simple change of host materials in the red emitting layer. A high quantum efficiency was obtained in PHWOLEDs with electron transport-type host in the red emitting layer and red emission was strong in PHWOLEDs with mixed-host in the red emitting layer. In addition, stable color performances were obtained in electron transport-type host rich devices.     

Lead-free KNLNT piezoelectric ceramics for high-frequency ultrasonic transducer application

This paper presents the latest development of a lead-free piezoelectric ceramic and its application to transducers suitable for high-frequency ultrasonic imaging. A lead-free piezoelectric ceramic with formula of (K_0.5Na_0.5)_0.97Li_0.03(Nb_0.9 Ta_0.1)O₃ (abbreviated as KNLNT-0.03/0.10) was fabricated and characterized. The material was found to have a clamped dielectric constant ε₃₃^S/ε₀ = 890, piezoelectric coefficient d₃₃ = 245 pC/N, electromechanical coupling factor k_t = 0.42 and Curie temperature T_c > 300 °C. High-frequency (40 MHz) ultrasound transducers were successfully fabricated with the lead-free material. A representative lead-free transducer had a bandwidth of 45%, two-way insertion loss of -18 dB. This performance is comparable to reported performances of popular lead-based transducers. The comparison results suggest that the lead-free piezoelectric material may serve as an alternative to lead-based piezoelectric materials for high-frequency ultrasonic transducer applications.     

有机半导体的物理掺杂理论

基于最低未被占据分子轨道（LUMO）和最高被占据分子轨道（HOMO）的高斯态密度分布与载流子在允许量子态中的费米-狄拉克（Fermi-Dirac）分布,提出有机半导体中物理掺杂的理论模型;研究了掺杂浓度、温度和禁带宽度对载流子浓度的影响,并与一些报道的实验结果做了比较.研究发现无论是否掺杂,温度升高时,有机半导体中的载流子浓度都会增大,并且随温度倒数的线性减小而指数增大;对于本征有机半导体,载流子浓度随禁带宽度的增大而指数下降,随高斯分布宽度的平方指数增加;对杂质和主体不同能级关系的掺杂情形下掺杂浓度对载 关键词： 有机半导体 掺杂 高斯态密度 载流子浓度     

Electronic properties close to Dirac cone in two-dimensional organic conductor α-(BEDT-TTF)<Subscript>2</Subscript>I<Subscript>3</Subscript>

A zero-gap state (ZGS) has been found in a bulk system of two-dimensional organic conductor, α-(BEDT-TTF)₂I₃ salt which consists of four sites of donor molecules in a unit cell. In the present paper, the characteristic of the ZGS is analyzed in detail and the electronic properties are examined in the vicinity of the Dirac point where the conduction and valence bands degenerate to form the zero-gap. The eigenvectors of the energy band have four components of respective sites, where two of them correspond to inequivalent sites and the other two correspond to equivalent sites. It is shown that the former exhibits an exotic momentum dependence around the contact point and the latter shows almost a constant dependence. The density of states of each site close to the Dirac point is calculated to demonstrate the temperature dependence of the local magnetic susceptibility and the local nuclear magnetic relaxation rate. Further, the robust property of the ZGS against the anion potential is also shown by using the second-order perturbation.     

Wave properties of an annular periodic multilayer structure containing the single-negative materials

The optical properties of an annular periodic multilayer structure containing two kinds of single-negative materials are theoretically investigated based on the transfer matrix method of the cylindrical waves. At the azimuthal mode number m1 and near the magnetic plasma frequency and the electronic plasma frequency for the TE wave and TM wave, respectively, we find that there is an additional high-reflectance band and some reflection dips exist when the plasma frequency is located in the photonic band gap. These two special features arising from the higher order azimuthal mode of the cylindrical waves are not seen in the planar one-dimensional Bragg reflector consisting of the single-negative materials. Such filtering responses provide a feasible way of designing a narrowband resonator without physically introducing any defect layer in the structure.     

聚合物及其混合物的太赫兹介电性质测定与分析方法

聚合物材料因其对太赫兹波的高透过率以及良好的塑形能力在太赫兹研究中扮演了重要的角色,由于材料的介电特性直接关系着折射率、极化率等重要性质,不同的应用场合通常需要材料呈现出特殊的太赫兹介电响应,一方面可以选取不同的聚合物材料,另一方面可以通过多种聚合物的混合实现材料介电性质的调制。聚合物材料合理的选取和设计建立在材料太赫兹介电精确表征之上,然而利用太赫兹时域光谱系统(THz-TDS)对聚合物材料进行透射式太赫兹介电表征时,材料内部空气孔隙的存在会影响表征结果的复现性,同时也会影响共混聚合物介电性质的分析和预测。因此以Landau, Lifshitz, Looyenga(LLL)模型为基础提出了考虑空气影响的介电分析模型,并选取了在太赫兹研究中广泛使用的聚合物材料聚乙烯(PE)和聚四氟乙烯(PTFE)对模型的有效性和稳定性加以验证,展开了两种材料单质和混合物两方面的介电分析。在太赫兹波透射样品之后的相位变化信息中提取出样品的介电常数,同一种物质制备的样片间太赫兹介电谱存在明显差异,使用包含气隙影响的LLL模型处理实验数据后,样品介电常数中空气的介电影响被移除,从而得到了两种材料的本征介电常数,在此基础上,使用测得的本征介电常数和混合物样品中两种材料的体积占比信息代入包含气隙影响的LLL模型计算得到了不同配比混合物的太赫兹介电常数的模拟值,并与THz-TDS实验获取的实验值进行了对比。利用所提出的有效介质模型,聚乙烯和聚四氟乙烯在10～40 cm-1波段内移除空气影响后的平均介电常数为2.315±0.003（±0.13%）和2.109±0.003（±0.14%）,在不同重量、不同厚度的单组份样品间模型测定的聚合物介电常数保持了良好的重复性,在对混合物的太赫兹介电性质测定与分析中,利用模型计算的混合物介电常数模拟值与THz-TDS测定的介电常数实验值保持了高度线性相关,其相关系数为0.964 3,全局相对误差为1.08%,体现了模型的可靠性。提出的介电分析模型可以扩展到更多的高分子材料单质及其混合物的太赫兹介电性质表征中,对太赫兹波段的共混聚合物材料设计具有参考价值。     

Study of top and bottom contact resistance in one organic field-effect transistor

This paper reports that the organic field-effect transistors with hybrid contact geometry were fabricated, in which the top electrodes and the bottom electrodes were combined in parallel resistances within one transistor. With the facility of the novel structure, the difference of contact resistance between the top contact geometry and the bottom contact geometry was studied. The hybrid contact devices showed similar characteristics with the top contact configuration devices, which provide helpful evidence on the lower contact resistance of the top contact configuration device. The origin of the different contact resistance between the top contact device and the bottom contact device was discussed.