一种新的磷化铟复合沟道高电子迁移率晶体管小信号物理模型

针对磷化铟(InP)复合沟道高电子迁移率晶体管(HEMT)的特点，对常规单沟道HEMT的小信号物理模型进行了修正，提出了一种新的用于复合沟道HEMT的小信号物理模型，用商用器件模拟软件ISE(integrated systems engineering)对其进行了仿真验证，对比了实测和仿真的I-V特性及转移特性曲线，重点研究了在InGaAs/InP双层沟道中考虑量子效应后的电场和电流密度随着不同栅电压的变化趋势，研究结果表明，由于在沟道中存在量子效应，在栅下靠源端低电场区域，电流主要分布在InGaAs沟道 关键词： 高电子迁移率晶体管 复合沟道 物理模型 磷化铟     

Homogeneous immunoassays

Applied Biochemistry and Biotechnology -     

北京大学DC-SC光阴极注入器的升级设计

 基于直流电子枪-超导加速腔（DC-SC）光阴极注入器样机的初步实验结果，北京大学提出了新的注入器的改进设计。新注入器核心结构包括皮尔斯枪和3+1/2超导腔。文章给出了它们的详细结构参数，然后采用程序，对注入器的束流动力学进行了模拟。结果发现：新注入器可以提供具有高束流品质、高平均流强的电子束，束团的电荷量100 pC，横向发射度低于2 mm·mrad,脉宽5 ps,rms束斑可达0.5 mm，重复频率81.25 MHz；也可以提供电荷量为300 pC低重复频率的高峰值流强的电子束，其横向发射度小于3 mm·mrad,脉宽约为9 ps，以满足北京大学自由电子激光（PKU-FEL）实验平台的要求。     

二维非正交坐标斜方格金属光子带隙结构

金属光子带隙结构在高能加速器、微波真空电子器件和太赫兹波源等方面具有重要的应用前景.基于实空间传输矩阵理论，详细研究了非正交坐标系下二维斜方格金属光子带隙结构，给出了计算横电模、横磁模完全带隙结构的一般公式，并分析了填充系数、任意斜角及金属柱横截面对带隙结构的影响.计算结果在退化为正方格情况下时，与其他方法的计算结果取得很好的一致. 关键词： 光子晶体 金属光子带隙 传输矩阵法 微波真空电子器件     

Converged properties of clean metal surfaces by all-electron first-principles calculations

All-electron full-potential linearized augmented plane-wave calculations of the surface energy, work function, and interlayer spacings of close-packed metal surfaces are presented, in particular, for the free-electron-like metal surfaces, Mg(0 0 0 1) and Al(1 1 1), and for the transition metal surfaces, Ti(0 0 0 1), Cu(1 1 1), Pd(1 1 1), and Pt(1 1 1). We investigate the convergence of the surface energy as a function of the number of layers in the slab, using the Cu(1 1 1) surface as an example. The results show that the surface energy, as obtained using total energies of the slab and bulk from separate calculations, converges well with respect to the number of layers in the slab. Obviously, it is necessary that bulk and surface calculations are performed with the same high accuracy. Furthermore, we discuss the performance of the local-density and generalized gradient approximations for the exchange-correlation functional in describing the various surface properties.     

荷移分光光度法测定氨酪酸

氨酪酸(am inobutyric acid),化学名称为γ-氨基丁酸。本品在体内与血氨结合生成尿毒排出体外,有降低血氨及促进大脑新陈代谢的作用,能够增强葡萄糖磷酸酯化酶的活性,利于脑细胞功能的恢复。主要用于脑卒中后遗症、脑动脉硬化症、头部外伤后以及一氧化碳中毒所致昏迷的辅助治疗     

磁电子学器件应用原理

本文介绍几种重要的磁电子器件的基本结构和工作原理,包括巨磁电阻与隧穿磁电阻传感器、巨磁电阻隔离器、巨磁电阻与隧穿磁电阻硬盘读出磁头、磁电阻随机存取存储器、自旋转移磁化反转与微波振荡器。自旋晶体管作为未来磁电子学或自旋电子学时代的基本元素,目前大都还处在概念型阶段,本文也将对几种自旋晶体管的大致原理作简要介绍。     

7-Hydroxy-4-methyl-8-(4′-methylpiperazine-1′-yl)methyl coumarin: An efficient probe for fluorescence resonance energy transfer to a bioactive indoloquinolizine system

Solvatochromic effects on the fluorescence behavior of 7-hydroxy-4-methyl-8-(4′-methyl-piperazine-1′ yl)methylcoumarin (HMMC) was studied in different solvents. The fluorescence of HMMC was found to be highly sensitive to both the polarity and the protic character of the solvent. Exploiting the polarity-sensitive fluorescence property of HMMC, its excited-state dipole moment has been determined. Fluorescence (Förster) resonance energy transfer (FRET) process from HMMC to a potent bioactive molecule 3-acetyl-4-oxo-6,7-dihydro-12 H indolo-[2,3-a] quinolizine (AODIQ) was studied. From the determined K_SV and R₀ values, it is argued that a long-range dipole-dipole interaction is operating for the energy transfer mechanism. The energy transfer efficiency (E) and the distance between the acceptor and the donor (r₀) have been determined.     

Characteristic features of carbazole phosphorescence quenching by benzophenone molecules in toluene at 77 K

We have studied the characteristic features of carbazole phosphorescence quenching by benzophenone in toluene at 77 K. We have shown that the decrease in the relative phosphorescence intensity for carbazole (energy donor) by a greater factor than we see for the relative change in its decay time is due to the fact that a change in the phosphorescence decay time occurs only for carbazole molecules participating in triplet-triplet energy transfer, while the substantial decrease in the phosphorescence intensity for carbazole with no change in the phosphorescence decay time is connected with quenching of its singlet states. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 554–556, July–August, 2006.     

Density functional theory investigation of the structure of SO2 and SO3 on Cu(1 1 1) and Ni(1 1 1)

Density functional theory (DFT) slab calculations, mainly using the generalised gradient approximation, have been used to investigate the minimum energy structures of molecular SO₂ and SO₃ on Cu(1 1 1) and Ni(1 1 1) surfaces. On Ni(1 1 1) the optimal local adsorption structures are in close agreement with experimental results for both molecular species obtained using the X-ray standing wavefield technique, although for adsorbed SO₂ the energetic difference between two alternative lateral positions of the lying-down molecule on the surface is marginally significant. On Cu(1 1 1) the results for adsorbed SO₂, in particular, were sensitive to the DFT functional used in the calculations, but in all cases failed to reproduce the experimentally-established preference for adsorption with the molecular plane perpendicular to the surface. This result is discussed in the context of previously published DFT results for these species adsorbed on Cu(1 0 0). The optimal geometry found for SO₃ on Cu(1 1 1) is similar to that on Ni(1 1 1), providing agreement with experiment regarding the molecular orientation but not the adsorption site.