Kinetics of the Formation of Goethite in the Presence of Sulfates and Chlorides of Monovalent Cations

The synthesis of goethite by oxidation of Fe²⁺in presence of metallic iron was undertaken in an aqueous medium containing indifferent salts such as Na₂SO₄, (NH₄)₂SO₄, NaCl, and NH₄Cl. Temperature and bubbling air rate were maintained, respectively, at 70°C and 1 L/min. The influence of anions and cations on the kinetics of each step of the process has been followed distinctly, the iron dissolution rate has been determined by the variation of the medium acidity, and the precipitation of goethite has been determined by gravimetric measurements. With respect to Cl⁻, the SO₄²⁻anion decreases the rate of the two reactions. NH₄⁺acts as an inhibitor when it is present at low concentrations and as an accelerator for higher concentrations; the limit corresponding to the change of NH₄⁺behavior depends on the nature of the counter ion. The reaction product is composed of pure goethite in the presence of sulfate salts, whereas a mixture of goethite and lepidocrocite, respectively, 60–70 and 40–30%, was observed in the presence of chloride salts.     

The C2H 3 + cation and its interaction with HF

The structure and stability of classical and bridged C₂H ₃ ⁺ is reinvestigated. The SCF and CEPA-PNO computations performed with flexibles andp basis sets including twod-sets on carbon confirm our previous results. We find the protonated acetylene structure to be more stable than the vinyl cation by 3.5–4 kcal/mol. The energy barrier for the interconversion of these two structures is at most a few tenths of a kcal/mol. The equilibrium SCF geometries of Weberet al. [15] are affected insignificantly by further optimization at the CEPA-PNO level. Several structures for the interaction of C₂H ₃ ⁺ with HF have been investigated at the SCF level. With our largest basis set which includes a complete set of polarization functions we find a remarkable levelling of the stabilities of most of the structures. In these cases the stabilization energy ΔE ranges from −10 to −13 kcal/mol.     

Effect of monomer concentration on characteristics of methacrylic acid-grafted polyethylene film prepared by photografting

The effect of monomer concentration on photografting of methacrylic acid (MAA) onto linear low-density polyethylene (PE) film (thickness=30 μm) was investigated at 60 °C in water solvent together with the location of MAA-grafted chains. Xanthone was used as a photoinitiator which was coated on the film sample earlier. The higher percentage of grafting and graft efficiency were afforded for the system with the higher monomer concentration. The resultant MAA-grafted films were subjected to measurements of pH-responsive character and ability to adsorb cupric ion in order to understand the characteristics of function introduced. The grafted samples exhibited the pH-responsive character, where they shrank and swelled in acidic and alkaline media, respectively. The pH-responsive character of the grafted films was higher for the samples prepared in the system with a higher monomer concentration. Moreover, the grafted samples exhibited the ability to adsorb cupric ion, and the ability was reduced when the sample was prepared in the system with a higher monomer concentration. The different extents of the pH-responsive character and ability to adsorb cupric ion of the resulting grafted PE films were discussed in terms of location of grafted chains in the film substrate, which was determined by a scanning electron microscope and an attenuated total reflection infrared spectroscopy.     

W／O型微乳液活化能和导电机理研究

电导行为是微乳液的重要性质之一。自Lagourette和Lagues发现了W/O型微乳液电导渗透(Percolation)现象后,人们开始了微乳液导电机理的研究。较流行的观点认为,界面层中表面活性剂分子的阴离子在微乳颗粒碰撞时发生跃迁而使W/O型微乳液具有导电性。     

On the choice of active space orbitals in MCSCF calculations

We describe a procedure which may be used to aid selection of the active space in multiconfigurational self-consistent field (MCSCF) calculations for general chemical systems. Starting from a restricted Hartree-Fock calculation, we define a hierarchy of interacting virtual orbitals for every occupied orbital. The most strongly interacting orbitals are then taken to constitute the active space in a configuration interaction (CI) calculation. The natural orbital occupation numbers obtained from the CI calculation are then used to choose the active space to be used in a subsequent MCSCF calculation. We illustrate our method on a number of systems (Li₂, B₂, C₂, carbonyl oxide and the transition state for oxidation of H₂S by dioxirane). In all these cases, ‘intuitive’ active spaces are inadequate, as are active spaces derived from the natural orbitals of unrestricted Hartree-Fock calculations.     

Enzymatic determination of phenols using peanut peroxidase

The influence of phenol and its derivatives on the kinetics of oxidation of aryldiamines (indicator-substrates) catalyzed by novel plant peroxidase—cationic peanut peroxidase—was studied. The character of influence of phenols on the kinetics of enzymatic oxidation of benzidine, o-dianisidine, and 3,3′,5,5′-tetramethylbenzidine (TMB) with hydrogen peroxide was found to depend on a correlation between redox properties of phenols and the indicator-substrate of peroxidase. Thus, the catalytic activity of peanut peroxidase is inhibited by phenols with redox potentials higher than that of aryldiamines mentioned above, whereas phenols with potentials below those of aryldiamines, play the role of second substrates of the enzyme. The enzymatic procedures for the determination of numerous phenols on the level of their concentrations 0.05–80 μM were developed using the reactions of benzidine, o-dianisidine, and TMB oxidation. Different analytical signals—the indicator reaction rate and the induction period duration—were used for the determination of phenols, belonging to various groups—the inhibitors and second substrates of the enzyme, respectively.     

Theoretical studies on the conformation of saccharides

Conformations of 2-methoxytetrahydropyran as a model for the six-membered ring in aldopyranosides have been calculated by the PCILO method using the algorithm of the conjugated gradient to optimize the geometry. The calculated geometry of the fourteen basic forms of 2-methoxytetrahydropyran was found to be in agreement with the available data obtained by X-ray diffraction of pyranosides. The results indicate differences in the geometry of 2-methoxytetrahydropyran resulting from the change of the axial vs. equatorial position of the methoxyl group. These changes are particularly meaningful in the values of bond angles and they are in agreement with the anomeric and exoanomeric effects. The experimentally found differences in the energies of an axial (⁴ C ₁) and equatorial (¹ C ₄) conformer, G = 2.9–3.7 kJ/mol, and the dipole moment, = 1.20 ± 0.05 D (1D = 3.33 10^–30mAs) agree well with the calculated values E = 3.18 kJ/mol and <> = 1.18 D which, in turn, suggest that the axial conformer is preferred over the equatorial one by a ratio a:e = 78:22.     

The crystal structure of CuVo3(II), a high-pressure ilmenite phase

The crystal structure of a second high-pressure copper vanadate phase, CuVO₃(II), has been determined and refined by full-matrix least-squares procedures using automatic diffractometer data to a residual R = 0.042 (R_w = 0.051). The space group is rhombohedral, $\text{R}\text{3}$, with hexagonal unit cell a = 4.966(2) and c = 14.084(5) Å [a_R = 5.501(2) Å and α = 53.66(3)°]. The structure is the fully ordered ilmenite-type and, on the basis of published magnetic data and the interatomic distances, the valence distribution Cu⁺V⁵⁺O₃ is proposed. This represents a unique example of Cu⁺ in an octahedral environment.     

非线型缩聚物的重均分子量

本文用数学期望方法研究了非线型共缩聚物的重均分子量,并推导出重均分子量表达式,将3种特例的理论曲线与实验结果相比较,两者基本相符。     

过氧化苯甲酰的光敏电荷转移分解反应及引发甲基丙烯酸甲酯的聚合

过氧化苯甲酰(BPO)的光诱导分解曾为许多工作者所注意。Walling和Gibian认为:以二苯酮为敏化剂时,BPO的敏化光解是通过三重态的能量转移过程。Encinas和Lissi则认为敏化是通过单重激发态使激发能转移至过氧化物基态的热振动态,从而导致过氧化物的分解。Tokumarur是最早提出过氧化苯甲酰光敏化诱导分解过程中存在着激基复合物(Exciplex)的可能性。最近他们又进一步研究以BPO为猝灭剂去猝