碱性水蒸气处理的ZSM-5沸石酸性质及孔结构的影响

 采用XRD，NH3－TPD，比表面积和孔结构测定等研究了在不同温度下用含10％NH3的水蒸气处理时HZSM－5沸石n（Si）／n（Al）＝25）酸性质及孔结构的变化规律．结果表明，随着处理温度的提高，HZSM－5的结构未发生明显的变化；样品的总酸量下降很快，但弱酸分布量相对提高，而强酸分布量相对下降；提高处理温度，样品的比表面积和微孔体积减小，二次孔或中孔体积及外表面积有增大的趋势．     

关于超高分子量聚丙烯超拉伸膜的结构性能的研究——Ⅱ.形态结构变化对力学性能的影响

用X-射线衍射、动态力学测定等手段研究了不同拉伸倍数的超高分子量聚丙烯薄膜的力学性能的变化.以X-射线衍射法并基于串联力学模型的假设得到的各样品的表观晶区模量E_c~(app)约为34-38GPa.样品模量E_b随拉伸倍数增加而逐渐增大,其变化趋势与非晶区取向因子的变化相类似,说明非晶区取向是左右样品模量的重要因素.室温下,69倍拉伸样品的模量为27GPa,约为表观结晶模量的3/4,且其值在-150-160℃的温度范围内没有急剧变化,说明超拉伸明显改善了材料的力学性能及热稳定性.在各拉伸样品中,考虑伸直链结晶生成的可能性,利用并串联力学模型对伸直链结晶的体积分数做了估算,并对X-射线衍射法所得表观结晶模量进行了修正,认为室温下聚丙烯的真正晶区模量约为47GPa.     

Study of structural,electromagnetic and dielectric properties of cadmium substituted Ni–Zn nanosized ferrites

Sol-gel auto-combustion method was adopted to prepare Cd²⁺ ions substituted Ni–Zn nanosized ferrites having a chemical formula Ni_0.5Zn_0.5-xCd_xFe₂O₄ (0.0 $\le x\le 0.4)$. Their structural, electromagnetic, and dielectric properties were investigated by using XRD, FE-SEM, EDS, FTIR, VSM, and IS. The XRD analysis revealed a single-phase cubic structure of all samples. The addition of cadmium increased the lattice constant and cell volume of Ni–Zn ferrite due to the difference in the ionic radii between Cadmium (0.97 ?Å) and Zinc (0.74 ?Å). FESEM images showed irregularly shaped grain sizes in the range of 40 to 73 ?nm with random orientations and some agglomeration. The FTIR analysis also confirmed the presence of spinal ferrite phase functional groups in all samples. The saturation magnetization decreased (from 89.51 to 71.32 emu/g) with increasing cadmium content. However, the remanent magnetization and coercivity parameters increased with an increase in cadmium content. The dc resistivity as a function of the temperature of all samples was investigated, and the activation energies were found to be in the range of 0.48 to 0.51 ?eV. The dielectric loss decreased with increasing cadmium content. However, the dielectric constant and dielectric loss tangent (tan) varied non-monotonically with increased cadmium content.     

Synthesis and characterization of aromatic polyamides containing alkylphthalimido pendent groups

A series of polyisophthalamides containing pendent phthalimido groups and flexible side spacers were prepared from four novel diacids and three commercial aromatic diamines. These polyamides were prepared in high yields and with high molecular weights by direct polycondensation with triphenyl phosphite and pyridine as condensing agents. The weight‐average and number‐average molecular weights, measured by gel permeation chromatography, were 70,000–137,000 and 47,000–86,000 g/mol, respectively. The novel polyamides were amorphous and readily soluble and showed glass‐transition temperatures of 150–240 °C, as measured by differential scanning calorimetry. Thermogravimetric analysis showed that the 10% weight‐loss temperatures in nitrogen were 355–430 °C, a significant improvement in thermal stability having been observed with the increase in the side‐chain length. A theoretical quantum mechanical study was successfully carried out to explain these results. Flexible and tough films, cast from polymer solutions, showed tensile strengths of 50–125 MPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3711–3724, 2002     

利用AFM和SNOM对淋巴细胞膜表面超微结构及其光学性质的初步研究

利用原子力显微镜(Atomic Force Microscopy，AFM)对淋巴细胞表面形貌进行了形态学的初步研究，观察到了其膜表面其他显微技术所不能发现的超微结构．同时也运用扫描近场光学显微镜(Scanning Near field Optical Microscopy，SNOM)对淋巴细胞进行成像，观察了其对光的透射、吸收等光学性质，并对两种成像方法进行了比较．研究发现：淋巴细胞膜表面凹凸不平，分布着大量直径几十到几百纳米不等的小颗粒；淋巴细胞中央部位有自发荧光现象．结果表明，AFM和SNOM可作为进一步探讨淋巴细胞的结构与功能关系的有力工具．     

含聚醚间隔链的扩链脲改性环氧树脂/双氰双胺固化体系性能研究

合成了一系列含不同分子量聚环氧丙烷 (PPG)柔性间隔链的扩链脲 ,系统考察了扩链脲改性环氧树脂E 5 1/双氰双胺 (dicy)固化体系的固化反应活性、动态力学行为、冲击性能和断裂面形态结构 ,并对体系的冲击性能、形态结构与动态力学行为之间的关系进行了探讨 .结果表明 ,改性体系固化反应活性明显提高 ,固化反应表观活化能降低 ,固化反应峰顶温度从 190℃降低至 14 0℃ ,固化反应的表观活化能由 14 5 5kJ/mol降至 70～ 80kJ mol;改性体系冲击强度明显提高 ,其中所含PPG柔性链分子量为 10 0 0的扩链脲改性的E 5 1/dicy体系冲击强度较未改性的E 5 1/dicy体系提高了 8倍 ,其冲击试样断裂面的形态具有明显的韧性断裂特征 ,微观两相网络结构的存在导致了改性体系冲击强度显著提高     

投料顺序对动态硫化PP／EPDM性能影响及其机理的研究

针对ＰＰ降解在ＰＰ／ＥＰＤＭ动态硫化中对体系产生的不利影响。考察了四种不同投料顺序对ＰＰ／ＥＰＤＭ动态硫化物的冲击韧性，加工流动性，交联程度和断面形貌等宏观和微观性能，并进行了不同ＥＰＤＭ含量的动态硫化和非硫化ＰＰ／ＥＰＤＭ的性能比较。结果表明，优化投料顺序能实现对动态硫化体系中化学反应对象和化学反应程度的有效干预。     

4-氯酚在TiO2纳米膜上光催化降解及反应动力学特征

氯酚(ＣＰ)化合物被广泛应用于木材防腐、金属防锈及杀虫剂等,因其毒性大、难降解,对环境造成严重污染[1,2]。目前用于ＣＰ的光催化降解的ＴｉＯ2粉体悬浮体系,催化剂不易回收利用。本文采用Ｓｏｌ Ｇｅｌ法制备的负载型ＴｉＯ2纳米粒子膜作为光催化剂,对4 ＣＰ进行了降解实验研究。同时应用ＸＲＤ法表征了不同实验条件下薄膜中ＴｉＯ2的晶相结构和粒度,考察了不同层数ＴｉＯ2膜的光催化活性,并对4 ＣＰ的降解条件及反应动力学特征进行了探讨。1　实验部分1.1　玻璃负载ＴｉＯ2膜的制备与表征[3-5]按照钛酸四丁酯∶无水乙醇∶水=3∶12∶…     

配合物聚合反应研究──Ⅱ．以二氨基磺磷酸盐配合物合成聚脲

以二氨基磺酸盐配合物合成了一系列主链上合金属元素（Ｃａ，Ｎｉ，Ｃｏ，Ｃｕ）的聚脲聚合物．用ＩＲ和１ＨＮＭＲ对其结构进行了表征，以ＴＧ－ＤＴＡ研究了其热性能，并讨论了金属元素种类及其含量对聚脲聚合物溶液粘度的影响．     

Some Properties of Solutions to the Novikov Equation with Weak Dissipation Terms

In this paper, we investigate the Novikov equation with weak dissipation terms. First, we give the local well-posedness and the blow-up scenario. Then, we discuss the global existence of the solutions under certain conditions. After that, on condition that the compactly supported initial data keeps its sign, we prove the infinite propagation speed of our solutions, and establish the large time behavior. Finally, we also elaborate the persistence property of our solutions in weighted Sobolev space.