La2O3,Y2O3-Mo次级发射材料研究

采用粉末冶金方法制备了La2O3，Y2O3-Mo次级发射材料，测试了各种材料的次级发射系数。结果表明在钼中加入稀土氧化物可以具有很好的次级发射性能。经过激活处理后，材料的最大次级发射系数均高于2．0，达到了材料使用要求的发射水平。应用扫描电镜(SEM)和光电能谱仪(XPS)研究了稀土元素在烧结体断口和发射前后在试样表面的分布情况。分析结果表明稀土元素易于在晶界处偏聚，且发射后试样表面稀土元素的相对浓度明显高于发射前的浓度。     

基于交叉共轭结构的功能材料

近年来,人们对交叉共轭体系的制备、性能以及理论研究方面产生了极大的兴趣。本文综述了近期国内外在交叉共轭体系研究方面取得的一些最新进展,重点介绍了其在自组装、有机电致发光和离子检测等方面的最新发展动态。最后还对本课题组在交叉型p-n双嵌段寡聚物方面的研究作了详细的介绍,并对一些热点问题作了展望。     

Photocatalytic Oxidation of Aniline in the Gas Phase Using Porous TiO2 Thin Films

The gas-phase photocatalytic oxidation of aniline on a new kind of porous nano-TiO₂ composite films is investigated. The composite film was prepared on glass fiber with the water glass as binders and dilute H₂SO₄ solution as solidifying reagent. The surface characters were observed by scanning electron microscope. The photocatalytic degradation of aniline on the composite films was carried out in a TiO₂/UV system. Some important factors affecting the photodegradation, such as the concentration of TiO₂, the initial concentration of aniline, and the existing water vapor, are also studied. The product of photocatalytic oxidation was detected by Fourier transform-Infrared. The partial intermediate products were absorbed on TiO₂ surface, which resulted in catalyst deactivation. But when it was irradiated under UV illumination or solar irradiation for some time, the catalyst could be reused without loss of catalytic activity. Translated from the Journal of Wuhan University (Natural Science Edition), 2005, 51(2) (in Chinese)     

Ion–Dipole Interactions in Concentrated Organic Electrolytes

An algorithm is proposed for calculating the energy of ion–dipole interactions in concentrated organic electrolytes. The ion–dipole interactions increase with increasing salt concentration and must be taken into account when the activation energy for the conductivity is calculated. In this case, the contribution of ion–dipole interactions to the activation energy for this transport process is of the same order of magnitude as the contribution of ion–ion interactions. The ion–dipole interaction energy was calculated for a cell of eight ions, alternatingly anions and cations, placed on the vertices of an expanded cubic lattice whose parameter is related to the mean interionic distance (pseudolattice theory). The solvent dipoles were introduced randomly into the cell by assuming a randomness compacity of 0.58. The energy of the dipole assembly in the cell was minimized by using a Newton–Raphson numerical method. The dielectric field gradient around ions was taken into account by a distance parameter and a dielectric constant of ε=3 at the surfaces of the ions. A fair agreement between experimental and calculated activation energy has been found for systems composed of γ‐butyrolactone (BL) as solvent and lithium perchlorate (LiClO₄), lithium tetrafluoroborate (LiBF₄), lithium hexafluorophosphate (LiPF₆), lithium hexafluoroarsenate (LiAsF₆), and lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) as salts.     

复合生物材料的研究进展

从力学性能的改善和降解速率的可调度等角度,总结了复合生物材料与单一组分的材料相比,在生物医学领域应用中所表现出的综合使用性能的优越性。综述了复合生物材料,特别是用于骨修复的各类有机／无机复合材料近年来的研究进展状况。提出将与人骨中磷灰石微晶类似的羟基磷灰石纳米粒子与可降解聚酯材料进行复合,能够得到具有优越骨诱导性能并且能够降解的新型骨修复材料。这方面的研究代表了有机／无机复合生物材料领域新的发展方向。     

超临界状态下炭基材料的储氢

评介了目前各种储氢方法，指出了炭基材料作为储氢材料的优势，综述了近年来纳米炭材料在储氢方面的进展，详细探讨了超临界状态下氢气在纳米孔隙中的吸附机理，并在此基础上提出了研究中的问题及进一步的研究方向。     

Infrared Evidence for Hoffman Reaction During Calcination of Surfactant-Templated Silica Films and Analysis of the Resulting Surface Sites

Fourier Transform Infrared transmission spectroscopy is used to characterize surfactant-templated silica films on glass. The calcination process is followed in situ and evidence for the removal of the surfactant along the Hoffman reaction is given. Once calcined, the surface of the pores of the mesoporous films is proven by deuteration experiment to be hydroxylated. Bands are attributed to isolated and hydrogen-bonded silanols. Silylation reaction with hexamethyldisilazane only occurs with isolated silanol groups.     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

Indene and pseudoazulene discotic liquid crystals: a synthetic and structural study

Several new liquid-crystalline indene and pseudoazulene systems are reported. These molecules give rise to either columnar hexagonal mesophases and/or columnar plastic phases. The unique nature of these compounds stems from their non-classical discotic structure. Although the molecules have rigid aromatic cores, they lack terminal tails and instead the polarizable atoms (S, halogens) or polar groups (CN, CO) act as unusual soft parts. On the basis of many structurally related materials, we conclude that for this type of compound molecular stacking in the solid state is a prerequisite for the appearance of a columnar mesophase, although other intermolecular interactions within the layers are also important in establishing liquid-crystalline order. The behavior reported for these mesomorphic molecules opens up new possibilities in the search for related molecular interactions that might be useful for the construction of supramolecular architectures with particular properties.