Influence of SMA content on the electro-optical properties of polymer-dispersed liquid crystal prepared by monodisperse poly(MMA-co-SMA)/LC microcapsules

Monodisperse poly(methyl methacrylate) (PMMA) particles containing various concentrations of stearyl methacrylate (SMA) were prepared, and a liquid crystal (LC) was swollen into the particles using a solute co-diffusion method (SCM). Phase separation behaviors between the polymer and LC were monitored by utilizing an optical and a polarized microscope (OM/POM). The monodisperse LC microcapsules were then applied to a polymer-dispersed liquid crystal (PDLC), and the electro-optical properties were investigated. As a result, the threshold and driving voltages were improved when the SMA content increased. The long alkyl chains of SMA in the capsules should exist at the interface of the LC and polymer resulting in an enhancement of phase separation between the polymer and LC, which largely influences the electro-optical properties of PDLC.     

Dispersion polymerization of methyl methacrylate: Mechanism of particle formation

The mechanism for the formation of micron-size polymer particles in the dispersion polymerization of methyl methacrylate was investigated by applying dynamic light scattering to monitor the evolution of the average particle size in the early stages of the polymerization. In addition, the contributions of physically adsorbed stabilizer and graft copolymer were evaluated by measuring the bound, unbound (adsorbed), and free stabilizer, and by determining the amount of added stabilizer required in seeded dispersion polymerizations. Twenty nanometer particles (termed nuclei) were the smallest particles detected and are considered to be formed by aggregation of growing polymer chains precipitating from solution as they exceed their critical chain length. Aggregation of these nuclei with themselves and their aggregates continues until mature and stable particles are formed. This occurs when sufficient stabilizer occupies the particle surface which includes both the polymeric stabilizer [poly(vinylpyrrolidone)] and its graft copolymer which is created in situ. The effects of process variables are discussed based on this mechanistic picture of the dispersion polymerization process. © 1994 John Wiley & Sons, Inc.     

Thermodynamic study of N-trifluoroacetyl-O-alkyl nipecotic acid ester enantiomers on diluted permethylated beta-cyclodextrin stationary phase

Thermodynamic studies were performed on 12 pairs of N-trifluoroacetyl-O-alkyl nipecotic acid ester enantiomers on diluted permethylated beta-cyclodextrin stationary phase (CP Chirasil-Dex CB). The influence of ester alkyl group structure on interaction with permethylated beta-cyclodextrin (Me-CD) and enantioselectivity was studied. The types of alkyl groups studied included n-alkyl (C1-C5) and groups containing branching at differing locations relative to the chiral center of the molecule. The results show that for a given molecular weight, the n-alkyl esters have stronger interactions with Me-CD than esters containing branched alkyl groups. However, although having weaker interactions with Me-CD, esters containing alpha-branched alkyl groups exhibit higher enantioselectivity than the corresponding n-alkyl or beta-branched isobutyl esters. From the retention data, thermodynamic parameters were estimated using the retention increment method and enthalpy-entropy compensation plots (ln R' versus deltaH) were constructed. The results suggest that ester enantiomers with branching at the alpha-carbon of the ester alkyl group have additional and/or different types of enantioselective interactions with Me-CD than the C1-C5 n-alkyl esters or beta-branched isobutyl ester. In order to obtain a qualitative sense of the interaction with Me-CD, structures of the diastereomeric complexes formed between Me-CD and some of the ester enantiomers were modeled using simulated annealing molecular dynamics.     

On-line testing of gas chromatographic columns with a programmable computing integrator

Summary A program is described which calculates the number of effective plates and the coating efficiency over the entire range of a test chromatogram. The peak widths at half height are derived by assuming a Gaussian peak shape. The interpolated peak width at k=4 is used for computing a standardized number of effective plates. Plate height, column permeability, overall performance and a novel parameter called sampling efficiency are calculated from 5 other figures — i. e. carrier gas code, pressure drop, column length, column temperature and particle size.Dedicated to Dr. Leslie S. Ettre for his 60th birthday.     

The predictive accuracy for estimating infinite dilution activity coefficients by γ∞-based UNIFAC

The predictive accuracy for estimating infinite dilution activity coefficients by a modification of the UNIFAC method wherein the group interaction parameters were based on only data (referred to as -based UNIFAC) has been studied. Estimates and measured values were compared for six prototypical solutes in a series of homologous n-alkanes, l-alcohols and alkanenitrile solvents. Despite the fact that the interaction parameters were derived using only data, this approach still gave serious errors due to several inherent problems in the original UNIFAC model. Its performance is sometimes even poorer than that of the original UNIFAC method. For example for nitromethane in alcohols and p-dioxane in nitriles values predicted by the -based UNIFAC are essentially zero. The large errors for these systems are most likely due to inaccurate interaction parameters in the -based UNIFAC method.     

Hair analysis of nicotine and cotinine for evaluating tobacco smoke exposure by liquid chromatography-mass spectrometry

A simple liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method for the determination of nicotine and cotinine in human hair was established. In the procedure, a hair sample (10 mg) was washed with dichloromethane and digested in 2.5 M sodium hydroxide. The digest was extracted with dichloromethane and then 25 mM hydrochloric acid in methanol was added to the extract, to prevent loss of analytes. The solution was evaporated and redissolved in the mobile phase, methanol/10 mM ammonium acetate (30/70, v/v). A 20 microL aliquot of redissolved solution was subjected to analysis. Nicotine and cotinine in human hair were quantified by using deuterated analytes as internal standards. The quantification limits were 8 microg/L for nicotine and 0.9 microg/L for cotinine. The proposed method was applied to measure the concentrations of nicotine and cotinine in hair of smokers and non-smokers to evaluate their self-reported smoking and exposure to environmental tobacco smoke. In both cases, the method provided good selectivity, accuracy and precision.     

原子结构参数的改进Xa法计算

六十年代后期,在Hartree－Fock-Slater法的基础上,提出了Xα法［1］．用于原子结构计算的Xα法与HF（Hartree－Fock）法的主要区别在于：用简单的统计平均交换势替代了HF法中计算最为困难的电子交换势,从而在保持较高理论严谨性和计算精确度的同时,大大减少了计算工作量,近年来获得了广泛的应用．我们尝试用经过适当修改的Xα方法,计算原子参数,解决分子结构中的某些问题．用原子参数解决分子问题,历来是化学和物理工作者常用的方法．本工作的意图是引入一个比HF法简单的容易在微机上实现的某种表现原子参数的计算方法,提供…     

Analysis of primary aliphatic short-chain monoamines by LC in water samples

Several derivatization procedures with o-phthaldialdehyde-N-acetylcysteine (OPA-NAC) were compared for a rapid analysis of primary aliphatic short-chain monoamines in water samples by HPLC using a LiChorospher analytical separation column (100RP₁₈ mm i.d., 5 μm). Both the solution and the solid-support assisted off-line derivatization on C₁₈ SPE cartridges were inadequate options because of beginning degradation processes of the instable isoindol derivatives during their transfer to the analytical column. This problem was precluded with the on-column or solid-support assisted on-line derivatization. In the last mentioned procedure, the derivatization took place in a Hypersil C₁₈ precolumn ( mm i.d., 30 μm) connected with an additional preconcentration step resulting in better detection limits (0.002-0.040 μg ml⁻¹ requiring only 150 μl of water sample) than in the on-column procedure (0.08-0.16 μg ml⁻¹). The improved sample handling, the better control of parameters affecting reaction rates, the fully automation of this method with only 10 min analysis time for each sample are further advantageous. The potential of the solid-support assisted on-line derivatization was outlined and applied to water samples from several sources. Recovery values near 100% were obtained.     

Absolute rate calculations: atom and proton transfers in hydrogen-bonded systems.

We calculate energy barriers of atom- and proton-transfer reactions in hydrogen-bonded complexes in the gas phase. Our calculations do not involve adjustable parameters and are based on bond-dissociation energies, ionization potentials, electron affinities, bond lengths, and vibration frequencies of the reactive bonds. The calculated barriers are in agreement with experimental data and high-level ab initio calculations. We relate the height of the barrier with the molecular properties of the reactants and complexes. The structure of complexes with strong hydrogen bonds approaches that of the transition state, and substantially reduces the barrier height. We calculate the hydrogen-abstraction rates in H-bonded systems using the transition-state theory with the semiclassical correction for tunneling, and show that they are in excellent agreement with the experimental data. H-bonding leads to an increase in tunneling corrections at room temperature.     

Generalized criterion of solvent polarity as a tool for control of chromatographic process

The generalized (reductive) criterion of solvent polarity was obtained by the method of multiparametric optimization of the Snyder index P", Hildebrand parameter _T , permittivity _r , and solvatochromism parameter E _T (30). Possibilities of employing this criterion for estimation of the elution power of normal and reversed mobile phases used in high-performance liquid chromatography were considered.