Spermatozoon of the freshwater rotifer Brachionus calyciflorus (Rotifera,Monogononta): Advances in morphological and ultrastructural studies

The morphological and ultrastructural features of the spermatozoon in Brachionus calyciflorus are described using light, fluorescence and transmission electron microscopy (TEM). The mature spermatozoon, which appears to be thread-like, is composed of a slightly expanded anterior of cell body region and a flagellum region without acrosome. The cell body region and flagellum region are respectively 16–27 μm and 20–33 μm in length (n = 60). The spermatozoon is characterized by a mass of dense tubular materials, which occupy most of the cell. Some mitochondria are distributed around the nuclear region in the anterior of the cell body region, while in the posterior portion of cell body, the chromatin often contains a single lobated nucleus arranged at the center of cell. The flagellum contains the classic axoneme (9 × 2 + 2) and possesses lateral undulating membrane. Mature B. calyciflorus males have no germ cell stages earlier than the spermatids in the testis. TEM examination reveals rigid rods as well as predominant typical spermatozoon in the testis. Observations, based on successive photographs and videos, enabled a first-time recording of the unique inverted movement of the spermatozoon, which indicated that the movement of the spermatozoon is driven by the flagellum. Our study also provides further supplementary insights into the phylogenetic systematics of the Rotifera.     

Data-fusion of high resolution X-ray CT,SEM and EDS for 3D and pseudo-3D chemical and structural characterization of sandstone

When dealing with the characterization of the structure and composition of natural stones, problems of representativeness and choice of analysis technique almost always occur. Since feature-sizes are typically spread over the nanometer to centimeter range, there is never one single technique that allows a rapid and complete characterization. Over the last few decades, high resolution X-ray CT (μ-CT) has become an invaluable tool for the 3D characterization of many materials, including natural stones. This technique has many important advantages, but there are also some limitations, including a tradeoff between resolution and sample size and a lack of chemical information. For geologists, this chemical information is of importance for the determination of minerals inside samples. We suggest a workflow for the complete chemical and structural characterization of a representative volume of a heterogeneous geological material. This workflow consists of combining information derived from CT scans at different spatial resolutions with information from scanning electron microscopy and energy-dispersive X-ray spectroscopy.     

Carbon–metal interfaces analyzed by aberration-corrected TEM: How copper and nickel nanoparticles interact with MWCNTs

Experimental confirmation for the stronger interaction of Ni with multi-walled carbon nanotubes (MWCNTs) compared to Cu with MWCNTs is presented. The interfaces between Cu (Ni) nanoparticles side-on oriented onto MWCNTs are analyzed with high spatial resolution electron energy-loss spectroscopy (EELS) of the carbon K-edge. The EEL spectra reveal a rehybridization from sp² to sp³ hybridized carbon of the outermost MWCNT layer at the Ni interface, but no such rehybridization can be observed at the Cu interface. The EELS results are supported by transmission electron microscopy (TEM) images, which show a better wetting behavior of Ni and a smaller gap at the Ni–MWCNT interface, as compared to the corresponding Cu interfaces. The different behavior of Cu and Ni can be explained in terms of differing valence d-orbital occupancy. For the successful experimental demonstration of this effect the use of a soft chemical metal deposition technique is crucial.     

Three dimensional accurate morphology measurements of polystyrene standard particles on silicon substrate by electron tomography

Polystyrene latex (PSL) nanoparticle (NP) sample is one of the most widely used standard materials. It is used for calibration of particle counters and particle size measurement tools. It has been reported that the measured NP sizes by various methods, such as Differential Mobility Analysis, dynamic light scattering (DLS), optical microscopy (OM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), differ from each other. Deformation of PSL NPs on mica substrate has been reported in AFM measurements: the lateral width of PSL NPs is smaller than their vertical height. To provide a reliable calibration standard, the deformation must be measured by a method that can reliably visualize the entire three dimensional (3D) shape of the PSL NPs. Here we present a method for detailed measurement of PSL NP 3D shape by means of electron tomography in a transmission electron microscope. The observed shape of the PSL NPs with 100 nm and 50 nm diameter were not spherical, but squished in direction perpendicular to the support substrate by about 7.4% and 12.1%, respectively. The high difference in surface energy of the PSL NPs and that of substrate together with their low Young modulus appear to explain the squishing of the NPs without presence of water film.     

极性晶体膜中强耦合激子的性质

在强耦合极化子模型基础上,采用Lee-Low-Pines(LLP)变分法研究了极性晶体膜中激子与表面光学(SO)声子强耦合、与体纵光学(LO)声子弱耦合体系的性质.讨论了极性晶体膜中激子的诱生势与膜厚度和温度的变化关系.结果表明:激子的诱生势不仅与电子-空穴间距离有关,而且与极性晶体膜厚度有关,同时温度对激子诱生势的影响十分显著.     

A feasibility study of X‐ray phase‐contrast mammographic tomography at the Imaging and Medical beamline of the Australian Synchrotron

Results are presented of a recent experiment at the Imaging and Medical beamline of the Australian Synchrotron intended to contribute to the implementation of low‐dose high‐sensitivity three‐dimensional mammographic phase‐contrast imaging, initially at synchrotrons and subsequently in hospitals and medical imaging clinics. The effect of such imaging parameters as X‐ray energy, source size, detector resolution, sample‐to‐detector distance, scanning and data processing strategies in the case of propagation‐based phase‐contrast computed tomography (CT) have been tested, quantified, evaluated and optimized using a plastic phantom simulating relevant breast‐tissue characteristics. Analysis of the data collected using a Hamamatsu CMOS Flat Panel Sensor, with a pixel size of 100 µm, revealed the presence of propagation‐based phase contrast and demonstrated significant improvement of the quality of phase‐contrast CT imaging compared with conventional (absorption‐based) CT, at medically acceptable radiation doses.     

A novel imaging tool for hepatic portal system using phase contrast technique with hydrogen peroxide‐generated O2 gas

The objective of this study was to investigate the potential of hydrogen peroxide‐generated oxygen gas‐based phase contrast imaging (PCI) for visualizing mouse hepatic portal veins. The O₂ gas was made from the reaction between H₂O₂ and catalase. The gas production was imaged by PCI in real time. The H₂O₂ was injected into the enteric cavity of the lower sigmoid colon to produce O₂ in the submucosal venous plexus. The generated O₂ gas could be finally drained into hepatic portal veins. Absorption contrast imaging (ACI) and PCI of O₂‐filled portal veins were performed and compared. PCI offers high resolution and real‐time visualization of the O₂ gas production. Compared with O₂‐based ACI, O₂‐based PCI significantly enhanced the revealing of the portal vein in vivo. It is concluded that O₂‐based PCI is a novel and promising imaging modality for future studies of portal venous disorders in mice models.     

Influence of higher harmonics of the undulator in X‐ray polarimetry and crystal monochromator design

The spectrum of the undulator radiation of beamline P01 at Petra III has been measured after passing a multiple reflection channel‐cut polarimeter. Odd and even harmonics up to the 15th order, as well as Compton peaks which were produced by the high harmonics in the spectrum, could been measured. These additional contributions can have a tremendous influence on the performance of the polarimeter and have to be taken into account for further polarimeter designs.     

通过双Σ型激光方案控制振动态布居转移

通过使用含时量子波包方法,对HF分子该类型的布居转移动力学进行了研究. 提出双Σ型激光控制方案,用于控制布居从|v=16>能级向|v=0>能级进行转移. 该方案的第一步是将布居从|v=16>经过中间能级|v=11>向|v=7>转移,第二步是将布居从|v=7>经过中间能级|v=3>向|v=0>转移. 在每一个步骤中,三个振动能级在两束重叠的激光脉冲作用下形成一个Σ型的布居转移路径. 通过优化激光的强度、频率和延迟时间,得到了最大的布居转移效率. 计算并比较了正序脉冲和反序脉冲两种情况,在这两种情况下,布居都可以超过90%从|v=16>能级向|v=0>能级进行转移.     

A macroscopic model for an intermediate state between type‐I and type‐II superconductivity

A vectorial nonlocal and nonlinear parabolic problem on a bounded domain for an intermediate state between type‐I and type‐II superconductivity is proposed. The domain is for instance a multiband superconductor that combines the characteristics of both types. The nonlocal term is represented by a (space) convolution with a singular kernel arising in Eringen's model. The nonlinearity is coming from the power law relation by Rhyner. The well‐posedness of the problem is discussed under low regularity assumptions and the error estimate for a semi‐implicit time‐discrete scheme based on backward Euler approximation is established. In the proofs, the monotonicity methods and the Minty–Browder argument are used. © 2015 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 1551–1567, 2015