Low temperature structural phase transition in hafnium and zirconium tetrafluoride trihydrates

From time-differential perturbed angular correlation (TDPAC) measurements, the monoclinic and triclinic crystal structures in hafnium and zirconium tetrafluoride trihydrates are found to be present simultaneously in both the compounds. From previous TDPAC and XRD investigations, a monoclinic crystal structure for HfF₄·3H₂O but, for its analogues zirconium compound, a triclinic structure was reported. Contrary to earlier reports, the triclinic fraction in HfF₄·3H₂O is found to be maximum (80%) at room temperature. In fact, the triclinic crystal structure of HfF₄·3H₂O is reported here which was not known prior to this report. In ZrF₄·3H₂O, a strong signal (80–90%) for the triclinic structure is found at room temperature while the monoclinic fraction appears as a weak signal (10–15%). Structural phase transitions in these trihydrate compounds have been observed in the temperature range 298–333 K.     

A comparative first-principles study on electronic structures and mechanical properties of ternary intermetallic compounds Al8Cr4Y and Al8Cu4Y: Pressure and tension effects

An investigation into the bulk properties, elastic properties and Debye temperature under pressure, and deformation mode under tension of Al₈Cu₄Y and Al₈Cr₄Y compounds was investigated by using first principles calculations based on density functional theory. The calculated lattice constants for the ternary compounds (Al₈Cu₄Y and Al₈Cr₄Y) are in good agreement with the experimental data. It can be seen from interatomic distances that the bonding between Al1 atom and Cr, Y, and Al2 atoms in Al₈Cr₄Y are stronger than Al₈Cu₄Y. The results of cohesive energy show that Al₈Cr₄Y should be easier to be formed and much stronger chemical bonds than Al₈Cu₄Y. The bulk modulus B, shear modulus G, Young's modulus E and Poisson's ratio ν can be obtained by using the Voigt–Reuss–Hill averaging scheme. From the results of elastic properties, Al₈Cr₄Y has the stronger mechanical behavior than Al₈Cu₄Y. Our calculations also show that pressure has a greater effect on mechanical behavior for both compounds. The ideal tensile strength are obtained by stress-strain relationships under [001](001) uniaxial tensile deformation, which are 15.4 and 23.4 GPa for Al₈Cu₄Y and Al₈Cr₄Y, respectively. The total and partial density of states and electron charge density under uniaxial tensile deformations for Al₈Cu₄Y and Al₈Cr₄Y compounds are also calculated and discussed in this work.     

Low-density carbon material modified with pyrolytic carbon

Here we report a physicochemical investigation of low-density carbon materials modified with pyrolytic carbon (PC). Exfoliated graphite (EG) obtained by nitrate expandable graphite thermal destruction was pressed into low-density graphite materials (LDGMs) with densities of 0.045-0.50 g/cm³ and saturated with PC by impact CVI technique. LDGM infiltration with PC leads to sample weight and density growth. The amount of deposited PC strictly depends on synthesis conditions. The maximum surface and volume deposition of PC occurred for samples with density of 0.05 g/cm³. XRD, Raman spectroscopy and scanning electron microscopy revealed that the deposited PC is of smooth laminar (SL) type. Composite thermal conductivity is about 2-3.5 Wt/m K.     

Optoelectronic and thermoelectric properties of Zintl YLi3X2(X=Sb,Bi) compounds through modified Becke—Johnson potential

In the present work, we investigate the structural, optoelectronic and thermoelectric properties of the YLi₃X₂(X=Sb, Bi) compounds using the full potential augmented plane wave plus local orbital (FP-APW+lo) method. The exchange-correlation potential is treated with the generalized gradient approximation/local density approximation (GGA/LDA) and with the modified Becke-Johnson potential (TB-mBJ) in order to improve the electronic band structure calculations. In addition, the estimated ground state properties such as the lattice constants, external parameters, and bulk moduli agree well with the available experimental data. Our band structure calculations with GGA and LDA predict that both compounds have semimetallic behaviors. However, the band structure calculations with the GGA/TB-mBJ approximation indicate that the ground state of the YLi₃Sb₂ compound is semiconducting and has an estimated indirect band gap (Γ-L) of about 0.036 eV while the ground state of YLi₃Bi₂ compound is semimetallic. Conversely the LDA/TB-mBJ calculations indicate that both compounds exhibit semiconducting characters and have an indirect band gap (Γ-L) of about 0.15 eV and 0.081 eV for YLi₃Sb and YLi₃Bi₂ respectively. Additionally, the optical properties reveal strong responses of the herein materials in the energy range between the IR and extreme UV regions. Thermoelectric properties such as thermal conductivity, electrical conductivity, Seebeck coefficient, and thermo power factors are also calculated.     

Solid-State 17O NMR studies of organic and biological molecules: Recent advances and future directions

This Trends article highlights the recent advances published between 2012 and 2015 in solid-state ¹⁷O NMR for organic and biological molecules. New developments in the following areas are described: (1) new oxygen-containing functional groups, (2) metal organic frameworks, (3) pharmaceuticals, (4) probing molecular motion in organic solids, (5) dynamic nuclear polarization, and (6) paramagnetic coordination compounds. For each of these areas, the author offers his personal views on important problems to be solved and possible future directions.     

The stabilities, electronic structures and elastic properties of Rbben As systems

The structural, electronic and elastic properties of Rb-As systems (RbAs in NaP, LiAs and AuCu structures, RbAs₂ in the MgCu₂ structure, Rb₃As in Na₃As, Cu₃P and Li₃Bi structures, and Rb₅As₄ in the A₅B₄ structure) are investigated with the generalized gradient approximation in the frame of density functional theory. The lattice parameters, cohesive energies, formation energies, bulk moduli and the first derivatives of the bulk moduli (to fit Murnaghan's equation of state) of the considered structures are calculated and reasonable agreement is obtained. In addition, the phase transition pressures are also predicted. The electronic band structures, the partial densities of states corresponding to the band structures and the charge density distributions are presented and analysed. The second-order elastic constants based on the stress-strain method and other related quantities such as Young's modulus, the shear modulus, Poisson's ratio, sound velocities, the Debye temperature and shear anisotropy factors are also estimated.     

Ab initio investigation into the structural, electronic and elastic properties of AlCu2TM (TM = Ti, Zr and Hf) ternary compounds

The Al-Cu-TM (TM = transition metal) alloy system has attracted great attention for both excellent glass-forming ability and its interesting physical properties. In this work, an investigation into the crystal, electrical and elastic properties of the AlCu₂TM (TM = Ti, Zr, and Hf) compounds has been conducted by first-principles calculations based on density-functional theory. The fully relaxed structure parameters of the AlCu₂TM compounds are in good agreement with previous experimental and other theoretical results. Besides, the cohesive energies of all the AlCu₂TM compounds have been evaluated. The energy band and densities of state of these compounds are also obtained. According to the calculated single crystal elastic constants, all the compounds are mechanically stable. The polycrystalline bulk moduli, shear moduli, Young’s moduli and Poisson’s ratio have been deduced by using Voigt-Reuss-Hill (VRH) approximations. The calculated negative Cauchy pressure and ratio of bulk modulus to shear modulus indicated that the AlCu₂TM compounds are ductile materials. The Debye temperatures of the AlCu₂TM compounds decrease with increasing the TM (Ti, Zr, and Hf) atomic number.     

Inhibition of premixed and nonpremixed flames with phosphorus-containing compounds

The inhibition/extinction of various flames—premixed stoichiometric C₃H₈/air, nonpremixed counterflow CH₄/O₂/N₂, and nonpremixed coflow n-heptane/air cup-burner flames doped with a number of phosphorus-containing compounds (PCCs)—has been investigated experimentally. More than 20 PCCs (organic phosphates, phosphonates, phosphates) and their fluorinated derivatives were studied. All PCCs exhibited similar dependencies in burning velocities, extinction strain rates, and extinction volume fractions of CO₂ upon PCC loading in the range of mole fractions of 0–7000 ppm within an experimental deviation of ± 5%. This confirms that the inhibition effectiveness of the PCCs is influenced by the phosphorus content in the PCC molecule rather than by the structure of the molecule. The burning velocity of a stoichiometric C₃H₈/air mixture and the extinction strain rate of a nonpremixed counterflow CH₄/O₂/N₂ flame doped with trimethylphosphate were calculated. Satisfactory agreement between experimental and modeling results confirms the conclusion that the reactions of phosphorus oxyacids with radicals are responsible for flame inhibition.     

Spin-peierls transition in dimerized stacks of anion-radical salt (N-Me-2,5-di-Me-Pz)(TCNQ)2, (Pz is pyrazine)

An anion-radical salt (ARS) (N-Me-2,5-di-Me-Pz)(TCNQ)₂, where Pz is pyrazine, was synthesized and its crystal structure was resolved. X-ray diffraction experiments on single crystals were performed. Heat capacity was measured in the temperature range from 2 to 300 K. Magnetisation and magnetic susceptibility were measured in the temperature range from 2 to 300 K and the low-temperature part was measured in magnetic fields from 5 mT to 5 T. The experimental results were explained in terms of dimerized Heisenberg spin chain model. Numerical calculations were performed and compared with experimental data.