Determination of photoelectron attenuation lengths in calcium phosphate ceramic films using XPS and RBS

Calcium phosphate (CaP) coatings are used to improve the biological performance of an implant. A technique that is often used to measure the composition of this material is XPS. When extremely thin coatings are measured, for example to study the interface between CaP and a substrate, the quantification of the XPS results is complicated by the varying attenuation lengths (ALs) of the photoelectrons at different energies. To correct for this, AL data are needed. In this work we measured these ALs by comparing XPS yields with the coating coverage (as measured by Rutherford backscattering spectrometry). We were able to determine the AL for several calcium and phosphorus peaks. Determination of the oxygen ALs was not possible owing to diffusion of oxygen into the polymeric substrates. For the peaks that are most often used for quantification of XPS yields (the Ca 2p and the P 2p peak), we found ALs of 21.8 × 10¹⁵ atoms cm^?2 and 26.8 × 10¹⁵ atoms cm^?2, respectively. Concentration profiles near the interface, growth mode and interfacial roughness appeared to have no measurable effect on the measured ALs. For the ALs, an energy dependence with an exponent of 0.55 was found. The measured ALs are best predicted by the empirical CS1 equation of Cumpson and Seah. Copyright © 2003 John Wiley & Sons, Ltd.     

Chemical communication of enzymatic ATP hydrolysis using a fluorescent chemosensor

Abstract

An anthrylpolyamine chemosensor, whose fluorescence is partially quenced upon electrostatic complexation to ATP, can be used to monitor the action of an enzyme (apyrase) that hydrolyses ATP to AMP and inorganic phosphate.     

Generation of anti-trenbolone monoclonal antibody and establishment of an indirect competitive enzyme-linked immunosorbent assay for detection of trenbolone in animal tissues, feed and urine

Trenbolone (TRE) is a steroid used by veterinarians on livestock to increase appetite and body weight. The use of TRE has been restricted because of its harmful side effect for consumers. To effectively control TRE residue in food and food product, a rapid and convenient immunoassay was developed by preparing an anti-TRE monoclonal antibody. The immunogen and coating antigen were prepared by coupling TRE hapten with carrier proteins via 1-ethyl-3-(dimethylaminopropyl)carbodiimide hydrochloride (EDC) method. The optimized method gave an average IC₅₀ value of 0.323 ng mL⁻¹ towards TRE and an average detection limit (LOD) of 0.06 ng mL⁻¹, which is much lower than the maximum residue levels (2.0 ng g⁻¹) accepted by the Joint FAO/WHO Expert Committee on Food Additives (JECFA). The specificity of the antibody was evaluated by measuring cross-reactivity of six structurally related compounds, including 19-nortestosterone (9.7%), testosterone (0.13%), methyltestosterone (<0.01%), methandrostenolone (<0.01%), (+)-dehydroisoandrosterone (<0.001%) and β-estradiol (<0.001%). The recovery rates of the test in detection of TRE-fortified animal tissue, urine and animal feed samples were in the range of 81.3-89.4%, while the intra- and inter-assay coefficients of variation were less than 12.0%.     

Polycyclic aromatic hydrocarbon and ionic compositions of atmospheric bulk deposition samples at a national park under the influence of intense barbecue smoke

The main aim of this study was to present the effects of barbecue smoke on a small-scale environment, a national park under the influence of intense barbecue smoke, and to scientifically support the sustainable usage of the park. Twelve-weekly bulk deposition samples were collected directly at the barbecuing area, and the samples were analysed for 16 US EPA’s priority PAH compounds and major ions. The mean concentrations of the individual PAHs in the bulk deposition samples ranged from 11.8 ng L^?1 (Ane) to 1085 ± 581 ng L^?1 (IcdP). The most frequently observed PAH compounds in the bulk deposition samples were Np, Anp, Flr, Phe, An, Flu, BkF, BaP and IcdP. The mean total PAH deposition fluxes were determined as 3.6 ± 5.6 µg m^?2 day^?1. The chloride, potassium and the sulphate fluxes were determined as 145.2 ± 267.8 µg m^?2 day^?1, 182.9 ± 291.9 µg m^?2 day^?1, and 111.9 ± 65.9 µg m^?2 day^?1, respectively. Dominant ions in the bulk deposition samples were potassium ion, chloride and sulphate which addressed as the fingerprint of barbecue grilling.     

Biocompatibility properties of composite scaffolds based on 1,4-butanediamine modified poly(lactide-co-glycolide) and nanobioceramics

Three-dimensional biodegradable porous scaffolds play an important role in tissue engineering. The degradable scaffold material, based on 1,4-butanediamine-modified poly(lactide-co-glycolide) (BMPLGA), nano-bioactive glass (NBAG), and nano-β-tricalciumphosphate (β-TCP), was prepared by a solution-casting/salt-leaching method. The biological properties were studied by using cell cytotoxicity, von Kossa staining, alkaline phosphatase activity, hemolytic test, acute toxicity, and genetic toxicity test. The MTT results indicated that the BMPLGA/NBAG-β-TCP materials did not show any cytotoxicity. The result of von Kossa staining showed that the introduction of the NBAG and β-TCP promoted fibroblastic differentiation and improved the mineral deposition of the BMPLGA matrix. In addition, the presence of NBAG and β-TCP in the composite further enhanced the ALP activity in comparison with the sole BMPLGA material. The hemolytic potential showed that the nanocomposite scaffolds were non-hemolytic. The BMPLGA/NBAG-β-TCP scaffolds showed no acute systemic toxicity or mutagenic action. Therefore, the results indicated the BMPLGA/NBAG-β-TCP nanocomposite scaffold could be considered as a potential bone tissue engineering implant.     

Optical resolution via catalytic generation of chiral auxiliary

A new catalytic method for separating enantiomers of racemic compounds is proposed. Catalytic asymmetric addition of racemic trans-2-substituted cyclohexanols to imines provided diastereomeric mixtures of aminals, and the subsequent separation of the enantiomers by silica-gel column chromatography and the hydrolysis of the aminals produced the alcohols in an optically active form.     

Thermodynamic properties of gaseous cerium phosphate studied by Knudsen effusion mass spectrometry

Gaseous CePO₂ has been identified by Knudsen effusion mass spectrometry during vaporization of CeO₂ and magnesium diphosphate from tungsten double, two‐temperature effusion cell. Structure and molecular parameters of gaseous cerium phosphate under study were determined using quantum chemical calculations. On the basis of equilibrium constants measured for gas‐phase reaction, standard formation enthalpy of CePO₂ was determined to be ?508 ± 41 kJ ? mol^?1 at the temperature 298 K.     

Biological applications of amide and amino acid containing synthetic macrocycles

ABSTRACT

Amino acid derived macrocycles with elaborate well-defined stereochemistry are a unique class of compounds that have been isolated from natural sources. Macrocycles like cyclosporine, octreotide, and valinomycin have been used in multiple applications, like drugs or ion sensors. Chemists have long been fascinated by the unique molecular recognition capabilities of these macrocycles and tried to design synthetic analogs with similar functions. This article is focused on reviewing current research on amide and amino acid containing macrocycles that have been developed in research laboratories for biological recognition, specifically for anion sensing, ion transport, carbohydrate sensing, and peptide sensing.     

光固化阻燃单体、树脂合成及其阻燃机理研究

本文综述了过去十余年间中国科技大学施文芳教授研究组在光固化阻燃技术领域的工作成果，主要包括活性单体、稀释剂、光固化树脂配方等体系，品类有磷酸酯类单体、含磷丙烯酸酯、超支化丙烯酸酯树脂、膦酸酯类单体和树脂、丙烯酸化环状磷腈、甲基丙烯酸化三聚氰胺、含磷环氧单体等十余种。同时介绍了这些配方体系的合成、性能和应用方法，以及对其热降解、阻燃性能评价和阻燃机理的研究。     

Co3+-Rich Na1.95CoP2O7 Phosphates as Efficient Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions in Alkaline Solution

Implementing sustainable energy conversion and storage technologies is highly reliant on crucial oxygen electrocatalysis, such as the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). However, the pursuit of low cost, energetic efficient and robust bifunctional catalysts for OER and ORR remains a great challenge. Herein, the novel Na-ion-deficient Na_2−xCoP₂O₇ catalysts are proposed to efficiently electrocatalyze OER and ORR in alkaline solution. The engineering of Na-ion deficiency can tune the electronic structure of Co, and thus tailor the intrinsically electrocatalytic performance. Among the sodium cobalt phosphate catalysts, the Na_1.95CoP₂O₇ (NCPO5) catalyst exhibits the lowest ΔE (E_J10,OER−E_J−1,ORR) of only 0.86 V, which favorably outperforms most of the reported non-noble metal catalysts. Moreover, the Na-ion deficiency can stabilize the phase structure and morphology of NCPO5 during the OER and ORR processes. This study highlights the Na-ion deficient Na_2−xCoP₂O₇ as a promising class of low-cost, highly active and robust bifunctional catalysts for OER and ORR.