四烷基锡中性载体推动亚硝酸根离子迁移穿透大块液膜

通过大块液膜体系研究了四烷基锡的碳链长度、载体浓度.NO_2~-浓度及抗衡离子等因素对NO_2~_穿透含四烷基锡的液膜的传质速率的影响,讨论了它们与四烷基锡为载体的离子电极性能间的关系。NO_2~-通过四烷基锡为载体的液膜的迁移规律符合离子对传输模式。     

Case for projectile kinetic energy gain in stopping power studies

Under certain collision conditions, a swift ion projectile colliding with a target will gain rather than lose kinetic energy, contrary to the standard conception of stopping power. In this work, we consider the conditions for such a collision such that the energy loss is negative, that is, that there will be projectile kinetic energy gain. In particular, for a target initially in the ground state we find that the projectile gains kinetic energy only when charge exchange and de‐excitation processes are involved. This occurs when the electron affinity of the projectile is larger than the ionization potential of the target. Consequences of this effect are analyzed. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 215–221, 2003     

Conductance Study of the Binding of K+ by Dibenzo-pyridino-18-crown-6 and 1,10-N,N′-didecyl-diaza-18-crown-6 in Acetonitrile

The binding of K+ by dibenzo-pyridino-18-crown-6 (B2-py-18-C-6) and1,10-N,N-didecyl-diaza-18-crown-6 (22-DD) has been studiedconductometrically at 10, 15, 20 and 25 °C in acetonitrile. Thecomplexes formed were assumed to have 1 : 1 stoichiometry. The complexes ofK+ with 18-crown-6 (18-C-6) and dibenzo-18-crown-6 (B2-18-C-6) were alsostudied for comparison purposes. The stability constant, K, of a givencomplex and its molar conductance, c, were obtained by subjectingthe conductance data to a non-linear least-squares curve fitting procedure.The values of the enthalpy change, H, the entropy change, Sand the Gibbs free energy, G, associated with the formation of the 1: 1 complexes were derived and compared with relevant literature data. Thevalues of G at 25 °C indicate that the binding capacity of thefour macrocycles follows the order 18-C-6 > 22-DD > B2-18-C-6 >B2-py-18-C-6. The difference between the molar ionic conductance of the freeK+ cation and that of the bound cation, KL+, was estimated and the trend insuch differences correlates with the molecular size of the macrocycle, L.     

A microcalorimetric study of the association of hexacyanoferrate(II) ions with calcium and magnesium ions in aqueous solution

Using flow microcalorimetry, the ion association reaction M²⁺(aq)+Fe(CN) ₆ ^4– (aq)=MFe(CN) ₆ ^2– (aq) (M=Ca, Mg) has been studied at 25°C over the ionic strength range 0.02 to 0.08 mol-dm^–3. Analyses of the data to obtain H^o, the enthalpy change at infinite dilution, are described. The value obtained for H^o is sensitive to the kind of functions used to correct for non-ideal behavior.     

Genetic engineering to enhance the selectivity of protein separations

The ability to recover and purify natural and recombinant proteins, and the costs of doing so remain a major task in introducing the potential products of biotechnology. The bases for separation range from specific binding onto tailored reagents to solubility and partitioning behavior governed by a mixed bag of size, charge, and hydrophobicity. In most cases, a combination of methods is used in sequence, and improvements in the selectivity at an early stage can enhance the effectiveness of subsequent (and usually more costly) steps. Genetic engineering provides a means of improving the selectivity within the context of existing separation methods. By this strategy, improvements in selectivity are sought by bestowing a distinctive property on the protein of interest. The primary sequence of amino acids is altered, such that the protein can be selectively removed from other components of the multicomponent mixture in which such products are commonly found. In this article, the range of these “distinctive properties” and their pairing with various separation methods will be reviewed. Specific examples from our work, in which a distinctive charge is provided via a polypeptide “purification” fusion tail, will be discussed. Separation methods we have used with these fusion proteins are precipitation, two-phase aqueous extraction, reversed micellar extraction, and ion exchange using both resins and membranes.     

Thermal decomposition of struvite

Struvite (NH₄MgPO₄·6H₂O) is a mineral often found in urinary tracts and kidneys. Thermal decomposition using slow low heating shows that the 'kidney' stone can be decomposed at temperatures below 40°C. At this temperature both ammonia and water are evolved. If more rapid heating is employed the decomposition occurs at around 80°C. The implication of this work rests with the use of low slow heat for the decomposition of the kidney stones. This revised version was published online in July 2006 with corrections to the Cover Date.     

pH,Definition and measurement at high temperatures

In this review paper, the NBS scale and its limitations are briefly discussed. The magnitude of liquid junction potentials and some calculated values are presented. The use of a molality scale for hydrogen electrode concentration cells at high temperatures is described, and results from measurements on ionization equilibria are summarized. Use of this scale is also recommended for certain circumstances with cells without liquid junction. As an alternative activity scale, use of the Pitzer ion-interaction treatment for ions is recommended for special cases. Finally, reference data are presented for _±HCl in HCl(aq) to 350°C and (HCl+NaCl)(aq) to 200°C that were derived by use of the Pitzer ion-interaction treatment.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Chromatographic separation of some metal ions on NTA-impregnated thin-layer plates

Summary NTA (nitrilo triacetic acid) has been used as an impregnating agent for an efficient TLC separation of twelve metal ions, using a mixture of 5% aq ammonia, ethanol acetone and acetic acid as the solvent system and dithizone (0.5% in chloroform) for visualization.     

磷脂液相二次离子质谱分析中的分子离子簇

对3种极性头不同的磷脂DMPG、DMPC、DMPE的液相二次离子质谱分析中出现 的分子离子簇现象进行了系统的研究。结果表明，虽然分子离子簇的形成与许多因素有关， 如PH值、离子强度等，但起决定作用的是样品在底物中的浓度，浓度增大有利于分子离子簇 的形成。研究还发现，由不同种类磷脂分子形成的分子离子簇峰明显高于由同种磷脂分子所 形成的分子离子簇峰，指出异种磷脂分子间的簇离子形成能力高于同种磷脂分子。此外还讨 论了磷脂分子在离子源条件下的稳定性、裂解规律及相互作用等。结果表明，本实验所选用 的磷脂分子在LSIMS条件下是稳定的，均能得到较强的分子离子峰，其主要碎片峰是磷酰键断裂而产生的碎片离子峰。     

基于MCM-41分子筛表面的镱离子印迹聚合物的制备及其性能

运用离子印迹技术,以3-氯丙基三乙氧基硅烷为锚定剂,将功能单体直链聚乙烯亚胺(PEI)接枝在MCM-41分子筛表面,选择镱离子作为模板离子,以环氧氯丙烷交联制备出基于MCM-41表面的镱离子印迹聚合物Yb(Ⅲ)-IIP-PEI/MCM-41,并以同样的方法制备非离子印迹聚合物(NIP-PEI/MCM-41)。 利用傅里叶变换红外光谱仪和扫描电子显微镜等技术手段对Yb³⁺印迹聚合物进行表征,采用静态吸附法确定了Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺的最佳吸附条件及选择性吸附性能。 结果表明,Yb(Ⅲ)-IIP-PEI/MCM-41和NIP-PEI/MCM-41的最大吸附量分别为229.93和99.27 mg/g;印迹材料对Yb³⁺的吸附符合Langmuir模型;吸附平衡在40 min的时候基本可以达到,可以利用准二级动力学模型来描述其吸附过程;Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺具有较强的选择性,同时也具有很好的重复使用性能。 成功地将MCM-41和离子印迹聚合物的优点结合起来,制备出一种对稀土Yb离子既有高吸附量又有高选择性的吸附材料,为进一步将其应用在处理实际废水,分离回收低浓度稀土废水中的稀土元素等方面打下了基础。