Possible Mechanisms of Intercalation

Recent knowledge of the kinetics and intercalation mechanisms are summarized and accompanied by examples of intercalation reactions of water and ethanol into anhydrous vanadyl phosphate and redox intercalation of alkali metal cations into vanadyl phosphate dihydrate. Three possible mechanisms of intercalation are presented which are based on: (i) a concept of exfoliation of layers; (ii) the formation of stages and randomly stacked layers; (iii) co-existence of intercalated and non-intercalated parts of crystals of the host separated by an advancing phase boundary. The corresponding kinetic curves are ascribed to mechanisms (ii) and (iii).     

Microchip capillary electrophoresis with amperometric detection for several carbohydrates

Microchip capillary electrophoresis (μCE) with amperometric detection at Cu electrode benefited fast separation and direct detection of carbohydrates. The working electrode of 50-μm Cu wire attached nearly against the channel outlet—4 μm, where it benefited collecting detection current and suppressing overwhelming noise. The use of alkaline medium was essential to separating and detecting carbohydrates, which dissociated into the sensitive alcolate anions. The 10-cm serpentine chip, though lengthening the migration time, it provided better efficiency. Sucrose, cellobiose, glucose, and fructose migrated from the outlet in 400 s +2000 V. The linear calibration plots ranging from 10 to 1000 μM with regression coefficients better than 0.996 were obtained. The injection-to-injection reproducibility of 1.24% (n=7) for glucose in peak current and 0.6% for migration times were excellent. The detection limit was low, down to 2.3 μM for glucose (S/N=3) or 27.6 attomole in mass detection.     

Automatic analysis of multiplex ligation-dependent probe amplification products (exemplified by a commercial kit for prenatal aneuploidy detection)

For use in routine prenatal diagnostics, we developed software and methods for automatic aneuploidy detection based on a commercial multiplex ligation-dependent probe amplification (MLPA) kit. Software and methods ensure a reliable, objective, and fast workflow, and may be applied to other types of MLPA kits. Following CE of MLPA amplification products, the software automatically identified the peak area for each probe, normalized it in relation to the neighboring peak areas of the test sample, computed the ratio relative to a reference created from normal samples, and compensated the ratio for a side effect of the normalization procedure that scaled all chromosomally normal DNA peak areas slightly up or down depending on the kind of aneuploidy present. For the chromosomes 13, 18, 21, X, and Y, probe reliability weighted mean ratio values and corresponding SDs were calculated, and the significance for being outside a reference interval around ratio 1.0 was tested. p < or = 1% suggested aneuploidy and 1 < p < or = 5% suggested potential aneuploidy. Individual peaks, where the normalized area was situated more than 4 SD from the corresponding reference, suggested possible partial deletion or gain. Sample quality was automatically assessed. Control probes were not required. Having used the software and methods for two years, we conclude that a reliable, objective, and fast workflow is obtained.     

关于冷原子吸收法测定尿汞影响因素探讨

介绍了对尿汞快速测定法的改进，用消泡剂磷三丁酸消除尿中泡沫，并讨论了尿汞测定的最佳条件，本法的相对标准偏差为４．８－９．０％，回收率９４－１０１％。     

Simultaneous determination of carbohydrates and organic acids in beer and wine by ion chromatography

The simultaneous determination of mono-organic acids and carbohydrates by ion chromatography with both conductometric and pulsed amperometric detection is described. The carbohydrates, such as mannitol, arabinose, glucose, fructose, lactose, sucrose, raffinose, and maltose, as well as monoorganic acids including acetate, glycolate, formate, pyruvate, and fluoride are separated as anions by ion-exchange chromatography with 0.080 mol/L sodium hydroxide eluent at 1 mL/min within 12 min. Carbohydrates are determined by pulsed amperometric detection and mono-organic acids are determined by suppressed conductivity detection. The species in beverages are determined.     

Detection of aniline at boron-doped diamond electrodes with cathodic stripping voltammetry

Boron-doped diamond (BDD) electrodes were used to investigate the possibility of detecting aniline by linear-sweep cathodic stripping voltammetry. It was found that the dimeric species (p-aminodiphenylamine and benzidine) formed by anodic oxidation of aniline during the accumulation period are involved in electrochemically reversible redox processes and, in acidic media, the shape of the stripping voltammetric response is suitable for aniline detection in the micromolar concentration range. The low background current of conductive diamond is an advantage compared to other electrode materials and allows a detection limit of 1 μM. Weak adsorption properties and the extreme electrochemical stability are additional advantages of BDD and it was found that, even after long-time measurements, the electrode surface can regain its initial activity by an anodic polarization in the potential region of water decomposition.     

Preparation and characterization of molecularly imprinted electropolymerized carbon electrodes

Molecularly imprinted polymers (MIPs) selective for fluorescein, rhodamine or 2,4-dichlorophenoxyacetic acid (2,4-D) were electropolymerized onto graphite electrodes using an aqueous solution equimolar in resorsinol/ortho-phenylenediamine and in the presence of the template molecule. For the dyes, the MIP-coated electrodes showed higher affinity for their template molecule than for a non-template dye. The 2,4-D-MIP-coated electrode showed a concentration dependent response for 2,4-D as compared to the polymer-coated electrode prepared in the absence of template molecule.     

Preparation and Crystal Structure of Potassium Iron Hydrogen Phosphate,KFe3(HPO4)2(H2PO4)6 · 4 H2O

Single crystals of potassium iron hydrogen phosphate, KFe₃(HPO₄)₂(H₂PO₄)₆ · 4 H₂O, were prepared hydrothermally by heating a mixture of Fe₂O₃, H₃PO₄ and K₂CO₃ with a small amount of water. It crystallizes monoclinic, space group C2/c (N° 15 Int. Tab.) with Z = 4 and a = 1701(2), b = 960.4(5), c = 1750(1) pm, β = 90.88(7)°. The crystal structure was solved by using 1716 unique reflections F₀ > 4σ(F₀) with a final wR2 value of 0.126 (SHELXL-93). The main feature of the crystal structure are layers formed by PO₄-tetrahedra around the FeO₆-octahedra parallel to (001). K⁺ and H₂O molecules connect these layers. Effective Coordination Numbers (ECoN), Mean Fictive Ionic Radii (MEFIR), Charge Distribution (CHARDI) and the Madelung Part of Lattice Energy (MAPLE) are calculated for the title compound. The existence of hydrogen bonds is confirmed by these calculations.     

Fabrication and performance of a three-dimensionally adjustable device for the amperometric detection of microchip capillary electrophoresis

A microchip CE-amperometric detection (AD) system has been fabricated by integrating a two-dimensionally adjustable CE microchip and an AD cell containing a one-dimensionally adjustable disk detection electrode in a Plexiglas holder. It facilitates the precise 3-D alignment between the channel outlet and the detection electrode without a complicated 3-D manipulator. The performance of this unique system was demonstrated by separating five aromatic amines (1,4-phenyldiamine, aniline, 2-methylaniline, 4-chloroaniline, and 1-naphthylamine) of environmental concern. Factors influencing their separation and detection processes were examined and optimized. The five analytes have been well separated within 140 s in a 74 cm long separation channel at a separation voltage of +2500 V using a 10 mM phosphate buffer (pH 3.5). Highly linear response is obtained for the five analytes over the range 20-200 microM with the detection limits ranging from 0.46 to 1.44 microM, respectively. The present system demonstrated long-term stability and reproducibility with RSDs of less than 5% for the peak current (n = 9). The new approach for the microchannel-electrode alignment should find a wide range of applications in CE, flowing injection analysis, and other microfluidic analysis systems.     

Determination and Differentiation of Two Seemingly Identical Medicinal Herbs by Capillary Electrophoresis with Electrochemical Detection

A high-performance capillary electrophoresis with electrochemical detection (CE-ED) method has been employed for the determination of six bioactive ingredients in traditional Chinese herbs, Herba cepbalanoplosis segeti and Herba cirsii japonici. The effects of several factors such as the acidity and concentration of running buffer, the separation voltage, the applied potential and the injection time on CE-ED were investigated. Under the optimum conditions, the six analytes could be well separated within 21 min in a 75 cm length capillary at the separation voltage of 15 kV in a 50 mmol L^–1 borax running buffer (pH 8.4). A 300 m diameter carbon disk electrode was used as the working electrode positioned carefully opposite the outlet of the capillary in a wall-jet configuration at potential of +950 mV (vs. SCE). Good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N=3) ranged from 1.5×10^–7 to 6.0×10^–7 g mL^–1 for all six analytes. This proposed method has been successfully applied for the analysis of traditional Chinese herbs after a relatively simple extraction procedure, further on, for the differentiation of these above two seemingly identical herbs based on their electropherograms or characteristic electrochemical profiles.