醋酸铅作为铅源合成CH3NH3PbBr3-xClx纳米晶体颗粒

Lead acetate, which is highly soluble in dimethylformamide, was used to synthesize mixed halide perovskite CH₃NH₃PbBr_3-xCl_x (MA = CH₃NH₃, 0 ≤ x ≤ 3) nanocrystals (NCs). This method provides an approach to address the low solubility of lead halides, especially lead chloride. Different Br/Cl ratios in MAPbBr_3-xCl_x lead to various optical properties. The photoluminescence emission peak can be tuned from 399 to 527 nm. Their full-widths at half-maxima (FWHM) are about 20 nm. MAPbBr_3-xCl_x NCs have an average diameter of ~(11 ± 3) nm and have uniform dispersion in toluene. The MAPbBr₃ NCs have a long average recombination lifetime (τ_ave = 97.4 ns) and a photoluminescence quantum yield (PLQY) of up to 73%.     

Polymerisation of vinyl acetate in microemulsions with methanol

 The homogeneity domains for the system vinyl acetate – methanol – monomaleate of nonylphenol ethoxylated with 25 mol ethylene oxide as an aqueous solution (MEMNPEO25) (33%) have been studied; it has been shown that, due to the shorter chain of methanol, these domains are more reduced than in the case of ethanol. The changes in refractive indexes and electrical conductivities have shown the formation of microemulsions with different structures (water-in-oil, bicontinuous or oil-in-water). Ammonium persulphate is soluble only in oil-in-water or in bicontinuous microemulsions. The initial polymerisation rates as well as the decomposition rates for the initiator are apparently affected when the microemulsion structure is modified. The polymerisation rate of vinyl acetate is higher in the presence of methanol than in the presence of ethanol for similar compositions; this fact may be attributed to a higher degree of ionisation of the initiator in the presence of methanol. Also, in polymerisations initiated by benzoyl peroxide, the conversions are influenced by the microstructure; thus, the maximum corresponds to water-in-oil microemulsions. By measuring the amount of unreacted MEMNPEO25 (gel permeation chromatography) we were able to show that the copolymer formed consisted of vinyl acetate and reactive surfactant. Received: 9 March 1999/Accepted: 13 March 2000     

纳米复合固体超强酸SO42-/CoFe2O4的制备和表征

采用纳米化学制备技术合成了新型的纳米复合团体超强酸催化剂ＳＯ４２－／ＣｏＦｅ２Ｏ４。用ＸＲＤ、ＴＥＭ、ＸＰＳ、红 外光谱和比表面测定等技术研究了该催化剂的结构形态,结果表明：所研制的ＳＯ４２－／ＣｏＦｅ２Ｏ４催化剂为晶态纳 米粒子（＜ ５０ｎｍ）,比表面积很大（１５７ｍ２· ｇ－１）,ＳＯ４２－与氧化物的金属离子呈无机双齿螯合状配位化合物的结 合形式。以乙酸乙酯合成为模型反应考察了该催化剂的催化活性,比较了酸性和酸强度,推断出该催化剂的酸 强度Ｈ０＜－１４．５。     

Thermal degradation of copolymers from vinyl acetate and vinyl alcohol

The thermal degradation of poly(vinyl acetate) (PVA), poly(vinyl alcohol) (PVAL), vinyl acetate-vinyl alcohol (VAVAL), vinyl acetate-vinyl-3,5-dinitrobenzoate (VAVDNB) and vinyl alcohol-3,5-dinitrobenzoate (VALVDNB) copolymers have been studied using differential thermal analysis (DTA) and thermogravimetry (TG) under isothermal and dynamic conditions in nitrogen. Thermal analysis indicates that PVA and PVAL are thermally more stable than VAVAL copolymers, being PVAL the most stable polymer. The presence of small amounts of vinyl-3,5-dinitrobenzoate (VDNB) in PVA or PVAL produces a marked decrease in the thermal stability of both homopolymers, being VALVDNB copolymers the less stable materials. The apparent activation energy of the degradative process was determined by the Kissinger and Flynn-Wall methods which agree well.     

Synthesis and characterization of new soluble poly(amide‐imide)s derived from 2,2‐bis[4‐(4‐trimellitimidophenoxy)phenyl]hexafluoropropane

A series of new soluble poly(amide‐imide)s were prepared from the diimide‐dicarboxylic acid 2,2‐bis[4‐(4‐trimellitimidophenoxy)phenyl]hexafluoropropane with various diamines by direct polycondensation in N‐methyl‐2‐pyrrolidinone containing CaCl₂ with triphenyl phosphite and pyridine as condensing agents. All the polymers were obtained in quantitative yields with inherent viscosities of 0.52–0.86 dL · g^?1. The poly(amide‐imide)s showed an amorphous nature and were readily soluble in various solvents, such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide, pyridine, and cyclohexanone. Tough and flexible films were obtained through casting from DMAc solutions. These polymer films had tensile strengths of 71–107 MPa and a tensile modulus range of 1.6–2.7 GPa. The glass‐transition temperatures of the polymers were determined by a differential scanning calorimetry method, and they ranged from 242 to 279 °C. These polymers were fairly stable up to a temperature around or above 400 °C, and they lost 10% of their weight from 480 to 536 °C and 486 to 537 °C in nitrogen and air, respectively. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3498–3504, 2001     

Preparation of Antimicrobial Ultrafine Cellulose Acetate Fibers with Silver Nanoparticles

Summary: A feasible method for the preparation of antimicrobial ultrafine fibers with silver nanoparticles was developed by direct electrospinning of a cellulose acetate (CA) solution with small amounts of silver nitrate followed by photoreduction. Silver nanoparticles in ultrafine CA fibers were stabilized by interactions with carbonyl oxygen atoms in CA. Ultrafine CA fibers with silver nanoparticles showed very strong antimicrobial activity.

TEM image of an ultrafine CA fiber electrospun from 10 wt.‐% CA solution with 0.5 wt.‐% AgNO₃.     

A new, efficient, and simple method for the synthesis of thiiranes from epoxides under solvent-free conditions

A simple, efficient, and new method has been developed for the synthesis of thiiranes from epoxides through a one-pot reaction of epoxides with diethyl phosphite in the presence of ammonium acetate or ammonium hydrogen carbonate/sulfur/ and acidic alumina under solvent-free conditions using microwave irradiation.     

Morphological,rheological, crystalline and mechanical properties of ethylene-vinyl acetate copolymer/linear low-density polyethylene/amphiphilic graphene oxide nanocomposites

Chemical modification of graphene oxide has become a popular method for imparting unique properties to extend its application. Here, we show a simple way to synthesize amphiphilic graphene oxide (AGO) by grafting quaternary ammonium salt onto GO sheets. The AGO sheets not only showed high thermal stability and good dispersion in many polar and non-polar solvents in comparison to GO sheets but also the chemical modification maintained the two-dimensional structure. As a result, the AGO sheets improve the interfacial interaction between ethylene-vinyl acetate copolymer (EVA) and linear low-density polyethylene (LLDPE). Because of the large size of AGO, the location of AGO is very dependent on the mixing strategy. The AGO was dispersed in the EVA phase when AGO was mixed first with EVA and then with LLDPE, whereas it was confined in the LLDPE phase when AGO was mixed first with LLDPE and then with EVA. AGO sheets were found at the interface of LLDPE and EVA when AGO, EVA, and LLDPE were mixed together, suggesting that AGO has a high interfacial interaction with both LLDPE and EVA. These high interfacial interactions lead to high tensile strength, Young's modulus, complex viscosity and crystallization temperature in comparison to the EVA/LLDPE blends without AGO sheets.     

Efficient Synthesis of N,N′‐Disubstituted Ureas/Thioureas Catalyzed by Iodine

Iodine is an efficient catalyst for the synthesis of symmetrically N,N′‐disubstituted ureas/thioureas by heating respective amines or phenyl hydrazine and urea/thiourea on a preheated hot plate at 90–95°C, under solvent‐free conditions. The yields are excellent, and the reactions go to complete within 5–10 min.     

H_2BPMPBD和DAM协同萃取部分Ln(Ⅲ)

4 酰代双吡唑啉酮是以吡唑酮为端基、脂肪族碳氢取代基联结而成的一类新型非环四齿酸性螯合剂[1 ,2 ] ,螯合功能团比普通的 4 酰代吡唑酮多一倍 ,对金属离子具有很强的萃取能力 ,其中对Ｆｅ(Ⅲ )、Ｃｏ(Ⅱ )、Ｎｉ(Ⅱ )、稀土离子的萃取分离以及稀土荧光配合物方面的研究已有报道[3～ 5] 。为了进一步探讨该类萃取剂的萃取性能 ,在合成萃取剂 1 ,4 双 ( 1′ 苯基 3′ 甲基 5′ 氧代吡唑 4′ 基 )丁二酮 [1 ,4]的基础上 ,研究了Ｈ2 Ａ与ＤＡＭ的氯仿溶液从硝酸介质中协同萃取Ｌｎ(Ⅲ )的性能。通过考察萃取剂浓度和溶液酸度等因素对Ｌｎ(Ⅲ …