Graphene‐coated fiber for solid‐phase microextraction of triazine herbicides in water samples

Graphene is a novel and interesting carbon material that could be used for the separation and purification of some chemical compounds. In this investigation, graphene was used as a novel fiber‐coating material for the solid‐phase microextraction (SPME) of four triazine herbicides (atrazine, prometon, ametryn and prometryn) in water samples. The main parameters that affect the extraction and desorption efficiencies, such as the extraction time, stirring rate, salt addition, desorption solvent and desorption time, were investigated and optimized. The optimized SPME by graphene‐coated fiber coupled with high‐performance liquid chromatography‐diode array detection (HPLC‐DAD) was successfully applied for the determination of the four triazine herbicides in water samples. The linearity of the method was in the range from 0.5 to 200 ng/mL, with the correlation coefficients (r) ranging from 0.9989 to 0.9998. The limits of detection of the method were 0.05‐0.2 ng/mL. The relative standard deviations varied from 3.5 to 4.9% (n=5). The recoveries of the triazine herbicides from water samples at spiking levels of 20.0 and 50.0 ng/mL were in the range between 86.0 and 94.6%. Compared with two commercial fibers (CW/TPR, 50 μm; PDMS/DVB, 60 μm), the graphene‐coated fiber showed higher extraction efficiency.     

Towards the D1 Protein Application for the Development of Sensors Specific for Herbicides

Abstract

One of the most widespread groups of pesticides are the triazine herbicides. These substances inhibit photosynthesis by blocking electron transport in plant chloroplasts. The possibility of the chloroplast D1 protein application for determination of the herbicide concentration in solution was investigated. Potentiometry and cyclic voltammetry have been selected to monitor specific interaction between the D1 protein and herbicide. It was found that membranes with well-defined structure, like Langmuir-Blongett film are more suitable for sensitive sensor construction than cross-linked membranes. After addition of atrazine, the current through these multilayers appeared to increase 5 fold. The effect was found to be fast and irreversible. It has been proposed that the toxic action of herbicides on chloroplasts, traditionally interpreted by inhibition of electron flow along the chloroplast membrane, may also be the result of the thylakoid membrane depolarization.     

Comparative Study for the Removal of Oxadiazon from Aqueous Solutions by Adsorption on Chitosan and Activated Carbon

Abstract

In the present investigation, chitosan and activated carbon are used as adsorbents for the removal of oxadiazon from aqueous solutions. The analyzing system was a gas chromatograph equipped with mass selective detector. The equilibrium studies are systematically carried out in a batch process, covering various process parameters that include agitation time, adsorbent dosage, and pH of the aqueous solution. Also, the relationship between extraction of oxadiazon and volume of aqueous/organic phase as well as the effect of inorganic salt were investigated. Adsorption behavior was found to follow Freundlich and Langmuir isotherms. The adsorption mechanism is described by a pseudo-second-order kinetics.     

Determination of diphenylether herbicides in water samples by solid-phase microextraction coupled to liquid chromatography

Solid-phase microextraction (SPME) coupled to LC for the analysis of five diphenylether herbicides (aclonifen, bifenox, fluoroglycofen-ethyl, oxyfluorfen, and lactofen) is described. Various parameters of extraction of analytes onto the fiber (such as type of fiber, extraction time and temperature, pH, impact of salt and organic solute) and desorption from the fiber in the desorption chamber prior to separation (such as type and composition of desorption solvent, desorption mode, soaking time, and flush-out time) were studied and optimized. Four commercially available SPME fibers were studied. PDMS/divinylbenzene (PDMS/DVB, 60 microm) and carbowax/ templated resin (CW/TPR, 50 microm) fibers were selected due to better extraction efficiencies. Repeatability (RSD, < 7%), correlation coefficient (> 0.994), and detection limit (0.33-1.74 and 0.22-1.94 ng/mL, respectively, for PDMS/DVB and CW/TPR) were investigated. Relative recovery (81-104% for PDMS/DVB and 83-100% for CW/TPR fiber) values have also been calculated. The developed method was successfully applied to the analysis of river water and water collected from a vegetable garden.     

Leachability and analytical speciation of antimony in coal fly ash

A new procedure was described with multiwalled carbon nanotubes as solid phase extraction packing material for the trace analysis of nicosulfuron, thifensulfuron and metsulfuron-methyl in water samples. The possible parameters influencing the enrichment were optimized and the optimal conditions were as followed: eluent, sample pH, flow rate and sample volume were acetonitrile containing 1% acetic acid, pH 3, 8 mL min⁻¹ and 500 mL, respectively. Under the optimal chromatographic separation and SPE conditions, the linear range, detection limit (S/N = 3) and precision (R.S.D., n = 6) were 0.04-40 ng mL⁻¹, 6.8 ng L⁻¹ and 2.5% for nicosulfuron, 0.04-40 ng mL⁻¹, 11.2 ng L⁻¹ and 5.4% for thifensulfuron, 0.02-20 ng mL⁻¹, 5.9 ng L⁻¹, 2.1% for metsulfuron-methyl, respectively. The established method was well employed to determine nicosulfuron, thifensulfuron and metsulfuron-methyl in tap water, seawater, reservoir water and well water samples, and satisfactory results were obtained, the spiked recoveries in the range of 87.2-100.7%, 96.5-105.6% and 83.7-111.1% for them each, respectively.     

Ion chromatography for the analysis of glyphosate and its selected metabolites. A review

Among all known compounds with herbicide activity glyphosate, has been the most commercially successful one. Currently, it is under evaluation because of its possible cancerogenic properties. However, the question is—if it is possible to completely withdraw it from use. Before it can happen, it is important to be sure of all its benefits and limitations, and this requires further detailed research. Due to the extent and prevalence of its use, glyphosate ends up in the environment and then in food and our bodies. There are several methods used for their determination. One of them is ion chromatography. Taking into account its advantages and disadvantages, as well as its rapid development, their importance in this field can be expected to increase in the near future. This paper summarizes the literature data from the past 22 years. The applications of ion chromatography in the determination of glyphosate in various types of environmental, food, and other samples are described. Moreover, the methods used so far are compared with the possibilities offered by ion chromatography, which main advantages and benefits are easy availability, low operating costs, green chemistry aspects, and suitable validation parameters.     

Application of phosphonium deep eutectic solvents as extractants in ultrasound-assisted dispersive liquid–liquid microextraction for preconcentration of trace amounts of herbicides in drainage ditches waters

In this study, an efficient preconcentration method was presented that is based on dispersive liquid-liquid microextraction taking the advantage of newly synthesized phosphonium deep eutectic solvents used as extractants and ultrasound probe as a dispersing agent. The extracts obtained were analyzed by high-performance liquid chromatography. To optimize the five most important factors for the microextraction procedure a central composite design plan was used. Under optimal conditions (140 μl of extractant, 60 mg of NaCl, pH = 2.0, 120 s of extraction time with ultrasound probe as the dispersing agent, 16 min of centrifugation for phase separation), the proposed method allowed to achieve good precision with RSD between 3.2% and 9.7% at 1.0, 5.0 and 40.0 ng ml levels. The preconcentration factors were equal to 42, 39, and 41, and the limits of detection 0.128, 0.103, and 0.135 ng/ml for dicamba, 2-methyl-4-chlorophenoxyacetic acid, and 2-methyl-4-chlorophenoxypropionic acid, respectively. The proposed method was successfully applied for the determination of chlorophenoxy acid herbicides in water samples from drainage ditches with a good recovery in the range of 70%–93%.