酯交换法合成碳酸二苯酯用氧化铅－氧化锌催化剂的研究

 制备了一种用于苯酚与碳酸二甲酯酯交换合成碳酸二苯酯的新型氧化铅－氧化锌多相催化剂．研究了制备方法、焙烧温度、不同母体和母体配比对催化剂催化性能的影响．应用XRD，TPR和原子吸收光谱对催化剂结构进行了表征，发现Pb3O4是主活性物相，ZnO为助催化剂，并以非晶态或微晶态存在于催化剂体系中．当焙烧温度为500℃，n（Pb）／n（Zn）≈2时，催化剂的活性最高，碳酸二苯酯产率可达45．6％．考察了催化剂的重复使用效果，并对失活原因进行了探讨．     

铬（Ⅲ）邻菲咯啉,8—羟基喹啉配合物／Y型分子筛的制备及苯酚催化羟化

制备了铬（Ⅲ）邻菲咯啉，８－羟基喹啉配合物／Ｙ型分子筛，利用元素分析，ＳＥＭ，ＵＶ－ＶｉｓＢＥＴ及ＸＲＤ等方法确定了分子筛选笼中金属配合物的生在及其晶体结构，考察了实验参数对苯酚转化率及产物选择性的影响。     

Tree-gel and loop-gel conversions in nonlinear polymerization

Ａｓｉｓｗｅｌｌｋｎｏｗｎ,ｔｈｅｔｈｅｏｒｙｆｏｒｎｏｎｌｉｎｅａｒｐｏｌｙｍｅｒｉｚａｔｉｏｎｓｗａｓｉｎｉｔｉａｔｅｄｂｙＦｌｏｒｙａｎｄＳｔｏｃｋｍａｙｅｒ[1—3].ＭｉｌｌｅｒａｎｄＭａｃｏｓｋｏ[4—6]ｐｒｏｐｏｓｅｄａｒｅｃｕｒｓｉｖｅｍｅｔｈｏｄｆｏｒｄｅａｌｉｎｇｗｉｔｈｔｈｅｐｒｏｂｌｅｍｏｆｔｈｅｐｏｓｔｇｅｌｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅｎｅｔｗｏｒｋｆｏｒｍｉｎｇｐｏｌｙｍｅｒｉｚａｔｉｏｎ.Ｓｔｅｐｔｏ[7]ｉｎｖｅｓｔｉｇａｔｅｄｔｈｅｇｅｌｇｅｌｒｅａｃｔｉｏｎｏｆＲＡｆｔ…     

The thermal properties of complex, nanophase-separated macromolecules as revealed by temperature-modulated calorimetry

Linear, flexible macromolecules are long recognized as phase structures limited to micrometer and nanometer dimensions with covalent bonds crossing the interfaces. This special, usually non-equilibrium structure leads to unique properties and a multitude of changes for different thermal and mechanical histories. Analyses that enable the study of these properties are temperature-modulated calorimetry and related techniques which allow the separation of equilibrium and non-equilibrium responses. Research on these topics is reviewed and combined to a model for the nanophases. The new approach to the complex nanophase systems yields a better understanding of the relationship between structure and thermodynamic properties. Special emphasis is placed on the size and surface effects on the glass and melting transitions, the development of rigid-amorphous phases, and the reversible melting within the globally metastable structure.     

相变温度低且宽的含有胆甾烯基和反式-4-烷基环己基苯氧基的二介晶化合物

Unsymmetrical dimesogenic compounds with cholesteryl and 4-（trans-4-n-alkylcyclohexyl）phenoxy parts were synthesized by condensation of cholester-3-yl 6-bromohexanoate with appropriate 4-（trans-4-n-alkylcyclohexyl）- phenols. Structures and thermal phase behaviour of these dimesogenic compounds have been confirmed by IR, IH NMR, elemental analysis, DSC, polarity microscopy and XRD measurements. Their thermal phase behaviour was significantly different with that of other cholesterol-based dimesogens while they exhibited low and wide phase transition temperature.     

Study of the Crystallization of an Aromatic Poly-ether-ketone (PK99) by Calorimetric and X-ray Analysis

An analysis of the crystallization behaviour of a new poly(aryl-ether-ether-ketone-ketone), PK99, by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) is presented. Isothermal crystallization TG were obtained in the whole range between the glass transition temperature (T _g) and the melting temperature (T _m) as a consequence of the slow crystallization kinetics stemming from the closeness of these transitions. The calorimetric results, compared with WAXD data, were applied to determine the theoretical melting temperature and crystallization enthalpy. The DSC and WAXD data were combined in order to calculate the total amount of the crystallizable fraction of the polymer, and a model was proposed to explain the difference between the fractions of crystallinity observed with these techniques. The thermal and X-ray data were also correlated with different lamellar morphologies arising from the crystallization conditions. Finally, DSC experiments on the crystallized sample were used to detect the presence of a rigid amorphous phase which does not relax at T _g. This revised version was published online in July 2006 with corrections to the Cover Date.     

以催化油浆窄馏分为添加剂的Al－MCM－41分子筛的合成

 采用阳离子表面活性剂十六烷基三甲基溴化铵为模板剂，以正硅酸乙酯为硅源，以硫酸铝为铝源，水热合成了以催化油浆窄馏分为添加剂的高比表面积Al－MCM－41介孔分子筛，并利用XRD，HREM，TG－DTA及N2吸附－脱附等测试手段对合成样品进行了表征．合成的Al－MCM－41分子筛的比表面积和孔体积分别达到1295m2／g和1．5cm3／g，其平均孔径为4．3nm．重点研究了Al－MCM－41分子筛结晶度、晶胞参数、比表面积、孔体积及平均孔径等结构性质随催化油浆窄馏分添加量及其组成的变化规律，并从合成机理上进行了解释．     

Ti接枝MCM-41催化剂的结构设计及化学亲和选择性研究

 用二氯化钛茂作为活性物种的来源，利用Si－MCM－41催化剂表面羟基的反应性，得到了Ti接枝MCM－41催化剂的两种结构模型．结构表征结果表明，Ti接枝MCM－41催化剂不仅长程结构好，孔径分布均一，而且催化剂表面活性中心含量高．两种结构模型催化剂上芳烃羟化反应性能表明，Ti接枝MCM－41催化剂表面的亲水／憎水性可以在较宽的范围内调变，从而可实现控制芳烃羟化的化学亲和选择性．另外，研究结果还表明，Ti接枝MCM－41催化剂具有很好的活性稳定性．     

Synthesis and characterization of oligo-4-[(pyridin-3-ylimino)methyl]phenol

The oxidative polycondensation of 4-[(pyridin-3-ylimino)methyl]phenol (4-PIMP) with O₂, H₂O₂, and NaOCl was studied in an aqueous alkaline medium between 50°C and 90°C. Oligo-4-[(pyridin-3-ylimino)methyl]phenol (O-4-PIMP) prepared was characterized by ¹H-NMR, ¹³C-NMR, FT-IR, UV-VIS, size-exclusion chromatography, and elemental and thermal analyses techniques. At the optimum reaction conditions, the yield of O-4-PIMP was 18.9%, 39.4%, and 46.8% using H₂O₂, O₂, and NaOCl oxidant, respectively. According to the TG analysis, the initial degradation temperature of O-4-PIMP was 218°C, which was by 50°C higher than that of 4-PIMP. Thermal analyses of 4-PIMP and O-4-PIMP were carried out in N₂ atmosphere at 15–1000°C. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and electrochemical energy gaps of 4-PIMP and O-4-PIMP were determined from the onset potentials for n-doping and p-doping, respectively. Also, optical band gaps of 4-PIMP and O-4-PIMP were determined according to UV-VIS measurements.     

铜配合物在Y型分子筛超笼中的组装及其催化苯酚羟化活性

 详尽介绍了通过分步法，在Y型分子筛超笼中制备铜（II）- 1，10菲咯啉和8-羟基喹啉配合物（简称CuPhen/Y，CuOx/Y）的过程；活性评价结果显示同Cu/Y相比，以H2O2为氧化剂，CuPhen/Y，CuOx/Y具有特殊的催化苯酚羟化功能。