Structure–reactivity studies of chloro and isothiocyanato diorganotin (IV) complexes based on multidentate N‐donor ligands: Synthesis,spectral characterization and crystal structures

The reaction of [SnMe₂Cl₂] with the bidentate ligand 4,7‐phenanthroline (4,7‐phen) resulted in the formation of [SnMe₂Cl₂ (4,7‐phen)]_n ( 1a ) which is probably a polymeric chain in solution. On the other hand, the reaction of [SnEt₂Cl₂] with 4,7‐phen afforded the complex [Sn₂Et₄Cl₄ (κ¹‐N‐4,7‐phen)₂(μ‐κ²‐N,N‐4,7‐phen)] ( 1b ) which dissociates in dimethylsulfoxide solution. The reaction of [SnR₂Cl₂] (R = Me, Et) with 2,2′‐biquinoline (biq) yielded the complexes [SnMe₂Cl₂ (κ²‐N,N‐biq)] ( 2a ) and [SnEt₂Cl₂ (κ¹‐N‐biq)₂] ( 2b ) in the solid state. Moreover, the reaction of [SnR₂Cl₂] (R = Me, Et) with the tridentate ligand 4′‐(2‐furyl)‐2,2′:6′,2″‐terpyridine (ftpy) resulted in the formation of ionic penta‐ and hexa‐coordinated tin complexes [SnMe₂Cl (ftpy)][SnMe₂Cl₃] ( 3a ) and [SnEt₂Cl (ftpy)]Cl ( 3b ). The reaction of [SnMe₂ (NCS)₂] with ftpy afforded the hepta‐coordinated complex [SnMe₂ (NCS)₂(ftpy)] ( 4a ). The products were fully characterized using elemental analysis, and infrared, UV–visible, multinuclear (¹H, ¹³C, ¹¹⁹Sn) NMR, DEPT‐135°, HH‐COSY and HSQC NMR spectroscopies. The crystal structure of complex 3a reveals that it contains the simultaneous presence of penta‐ and hexa‐coordinated tin (IV) atoms. Notably, the crystal structure of complex 4a shows that tin (IV) is hepta‐coordinated in a pentagonal bipyramidal geometry SnC₂N₅ by three nitrogen atoms of ftpy, two nitrogen atoms of NCS^? and two Me groups with trans‐[SnMe₂] configuration. These data indicate the influence of halide or pseudo‐halide group on the coordination number and geometry of tin. Hirshfeld surface analysis and two‐dimensional fingerprint plots were calculated for 3a and 4a which show the π–π interaction between molecules in the solid is relatively weak.     

Synthesis and Characterization of Heteroleptic Ru(II) Complexes Based on 4,4′‐Bis((E)‐styryl)‐2,2′‐bipyridine as Ancillary Ligand and Application for Dye‐Sensitized Solar Cells

Heteroleptic Ru(II) complexes were designed based on 4,4′‐bis((E)‐styryl)‐2,2′‐bipyridine (bsbpy) as an ancillary ligand for dye‐sensitized solar cells (DSSCs), and those Ru(II) sensitizers, [Ru(L)(bsbpy)(NCS)₂][TBA] (TBA; tetrabutylammonium), were synthesized according to a typical one‐pot reaction of [RuCl₂(p‐cymene)]₂ with the corresponding anchoring ligands (where L = 4,4′‐dicarboxy‐2,2′‐bipyridine (dcbpy), 4,4′‐bis((E)‐carboxyvinyl)‐2,2′‐bipyridine (dcvbpy), 4,7‐dicarboxy‐1,10‐phenanthroline (dcphen), or 4,7‐bis((E)‐carboxyvinyl)‐1,10‐phenanthroline (dcvphen)). The new Ru(II) dyes, [Ru(L)(bsbpy)(NCS)₂][TBA] that incorporated vinyl spacer(s) into ancillary and/or anchoring ligand displayed red‐shifted bands over the overall UV/VIS region relative to the absorption spectra of N719 . A combination of bsbpy ancillary and dcphen anchoring ligand showed the best result for the overall power conversion efficiency (η); i.e., a DSSC fabricated with [Ru(dcphen)(bsbpy)(NCS)₂][TBA] exhibited a power conversion efficiency (η) of 2.98% (compare to N719 , 4.82%).     

Spectrophotometric Label-Free Determination of Lead Using Thiol-Functionalized Gold Nanoparticles

A method for the determination of lead is described using thiol-functionalized gold nanoparticle. The detection method is based on the prevention of thiol-induced aggregation of gold nanoparticles by lead. Among six thiols, e.g., 4-mercapto-1-butanol, meso-2, 3-dimercaptosuccinic acid, mercaptosuccinic acid, 6-mercapto-1-hexanol, 4-(methylthio)-1-butanol, 1-propanethiol, four (4-mercapto-1-butanol, 6-mercapto-1-hexanol, 4-(methylthio)-1-butanol and 1-propanethiol) induced the aggregation of the gold nanoparticles which was measured by the change in absorbance at 520 and 650?nm. Prior incubation of the gold nanoparticles with lead decreased the 4-(methylthio)-1-butanol-induced aggregation of gold nanoparticles in a dose-dependent manner. A linear inverse relationship between the logarithmic concentration of lead and the ratio of absorbance at 650 to 520 was noted. The method has a dynamic range from 10?nM to 100?µM. However, metals such as mercury and chromium were more effective in comparison with lead in preventing the 4-methylthio-1-butanol-induced aggregation of gold nanoparticles. The method can be used for assessing the heavy metal load in water samples.     

Spectrophotometric determination of trace-level bromate in drinking water after post-column reaction with pararosaniline based on multi-walled carbon nanotubes

A simple and sensitive spectrophotometric method is described for low level determinationof bromate in drinking water. This method is based on the reduction of bromate ions into bromine in the presence of pararosaniline by sodium metabisulphite to form a highly stable pink-red complex measured at 540 nm. Maximum colour formation was obtained at about 45 min. Multi-walled carbon nanotubes, a solid phase extraction sorbent, has been described for the removal of cationic interferences of major elements and heavy metals from water samples prior to conducting the assay. Bear’s law is obeyed in the range of 5–80 µg.L^?1 with limit of detection of 0.44 µg.L^?1 and correlation coefficient of 0.998 (n = 5). The mean relative standard deviation (RSD%) of the results within-day precision and accuracy were ≤1.2% which confirmed the reproducibility of the assay technique. The optimum assay conditions and their applicability to the determination of water samples are described. The method was successfully applied for the determination of bromate in water samples with satisfactory results and recommended to be applied in all desalination plant samples.     

超细粉体二硫纶·取代菲咯啉铁(Ⅱ)配合物的光敏性研究

报道了新近合成的二硫纶·取代菲咯啉铁 (Ⅱ )配合物FeLL′(L =mnt2 - ,1 ,2 二氰基乙烯 1 ,2 二硫醇离子 ,L′ =phen 5,6 dione,1 ,1 0 菲咯啉 5,6 二酮 ;5 NO2 phen ,5 硝基 1 ,1 0 菲咯啉 )的电子吸收光谱、电子发射光谱及对CdS的光敏性 ,研究了FeLL′对CdS的光敏化作用与其电子光谱间的关系     

Biphasic fluence-response curves and derived action spectra for light-induced absorbance changes in Phycomyces mycelium

The photoresponses of Phycomyces, including phototropism and photocontrol of sporangiophore development, are mediated primarily by blue and UV light. Recent results on these two responses indicated a subsidiary role for green light. We have measured in vivo light-induced absorbance changes (LIAC) in mycelial samples of a caroteneless (carB) strain to compare the effectiveness of UV, blue, and green light. In the dual-wavelength kinetic mode of the spectrophotometer, measuring wavelengths of 445 and 470 nm were chosen, because green light produces substantial absorbance changes between these two wavelengths. Fluence-response curves were measured for 13 wavelengths between 365 and 530 nm, and for variable exposure times between 0.5 and 320 s. With one exception (365 nm), the curves were biphasic. The low fluence component was generally sigmoidal with an abrupt rise. The high fluence component failed to reach saturation for the fluences tested (less than 70 μmol m⁻² s⁻¹). Using the inferred threshold fluences of these two components as criterion effects, we obtained two action spectra. For the low fluence component, the action spectrum showed major peaks at 394, 450, and 530 nm and a minor peak at 416 nm. The high fluence component action spectrum showed very little sensitivity in the blue region. The major sensitivity was in the near UV, and a relatively small peak appeared in the green part of the spectrum at 507 nm. The biphasic character of the fluence-response curves suggests that two photosystems are responsible for the absorbance changes. The low fluence photosystem is sensitive mainly to blue and UV light and may thus represent a physiological blue-light photoreceptor. The high fluence photosystem is clearly not of this type. It (and perhaps the low fluence system as well) may mediate some of the subsidiary physiological effects of green light.     

Direct spectrophotometric method for the determination of cobalt with indane 1,2,3-trionetrioxime in aqueous medium

A simple, sensitive and selective Spectrophotometric method has been developed for the determination of cobalt using indane 1,2,3-trionetrioxime (ITT): The method is based on the colour reaction between ITT and cobalt(II) in sodium acetate-acetic acid buffer (pH 4.5–7.5) medium. The calibration graph for measurement at 320 nm is linear in the range 1.18–23.60g of cobalt per 25 ml, with molar absorptivity of 5.32×10⁴1mol^–1 cm^–1. The effect of interfering ions has been studied and the method was applied to the determination of cobalt in alloys, with good results.     

双试剂双波长光度法同时测定硅石中的铁和钛

研究以邻二氮菲(Phen)和二安替比林甲烷(DAM)为显色剂同时测定硅石中的铁和钛,在pH值为0.99～1.26的酸性条件下,Phen和DAM可分别与铁和钛生成稳定的有色络合物.分别在波长510 nm和390 nm测其吸光度,用双波长计算法,同时测定试液中的铁和钛.铁量在0～100μg/(50 mL),钛量在0～150μg/(50 mL),符合比耳定律.铁和钛的加标回收率分别为99.8%～101.3%和98.8%～101.6%.     

Bestimmung Von Molybdän Nach Extraction Mit O,O,S - Triäthyldithiophosphat

Abstract

The interaction of molybdenum(V) with potassium thiocyanate in a medium of O,O,S-triethyldithiophosphate [(C₂H₅O)₂P(S)SC₂H₅] and ethanol at a ratio 4:1 has been studied.

The stability constant of the molybdenum(V) thiocyanate complex was determined to be 7.6 × 10² with a molar ratio Mo(v) : SCN of 1:1. A new method based on the formation of the molybdenum-thiocyanate complex in the organic phase has been developed for the determination of molybdenum in steel.     

Simultaneous Determination of Acetaminophen and Phenobarbital in Suppositories by Partial Least-Squares Spectrophotometric Calibration

Abstract

The use of partial least-squares spectrophotometric calibration for the simultaneous determination of suppositories in a multicomponent formulation is presented. This method is applied to the deternination of acetaminophen and phenobarbital in suppository preparations. The results show that these components in a molar ratio of about 61:1 in suppositories have been determined simultaneously with high precision.