Self-inclusion properties of C60-linked calix[5]arene

C₆₀-linked calix[5]arenes were synthesized and their intramolecular binding properties were investigated. The self-inclusion ratio of the C₆₀ moiety was determined by using UV-vis spectroscopy, and the ratio depends on chain length, temperature, and solvent. Influence of temperature and solvent was explained by the thermodynamic data of the intramolecular complex formation process.     

A conductance study of the association of alkali cations with 1,13-dibenzo-24-crown-8 in acetonitrile

A conductance study concerning the association of Na⁺, K⁺, Rb⁺, and Cs⁺ with 1,13-dibenzo-24-crown-8 in acetonitrile has been carried out at 35, 30, 25, 20, and 15°C. The observed molar conductivities were found to decrease significantly for mole ratios less than unity. A model involving 11 stoichiometry has been used to analyze the conductivity data. The stability constant, K, and the molar conductivity _C for each 11 complex were determined from the conductivity data by using a nonlinear least squares curve fitting procedure. The binding sequence, based on the value of log K at 25°C, is found to be Rb⁺>Cs⁺>K⁺>Na⁺. Values of H^o and S^o are reported and their significance is discussed.     

Preparation and characterization of Mg(II)-, Ca(II) and Cd(II) complexes of 1,2-ethanediol and water

Mixed ligand complexes of different compositions were prepared with water, sulfate ion and 1,2-ethanediol as ligand. IR spectra and the thermoanalytical curves of the complexes were recorded. Oxygen atoms bound by one or two coordinate bonds to the metal ion, or by hydrogen-bonds in the crystal, were observed. As for the water molecule, 1,2-ethanediol molecules of crystal and monohydrate type were found, depending on the type of binding of the oxygen atoms.This revised version was published online in November 2005 with corrections to the Cover Date.     

PPh3催化Mannich反应机理的密度泛函研究

通过密度泛函理论研究了PPh3催化苯胺、苯甲醛和乙酰乙酸乙酯三组分Mannich反应的机理.计算结果表明该机理主要分3个步骤进行:PPh3催化乙酰乙酸乙酯发生酮式-烯醇式互变异构得到烯醇;烯醇辅助苯胺和苯甲醛缩合并脱水生成亚胺;亚胺和烯醇通过加成反应生成β-氨基羰基化合物.通过详细的机理研究,发现烯醇从亚胺的背面进攻其亲电C原子的过渡态的相对能量更低,容易得到反式的产物,对实验观察到的非对映选择性进行了合理的解释.     

Dual chemosensing properties of new anthraquinone-based receptors toward fluoride ions

Novel colorimetric receptors 1-[(2-hydroxy-5-bromo-benzylidene)-amino]-anthraquinone, 1-[(2-hydroxy-5-methyl-benzylidene)-amino]-anthraquinone, and 1-[(2-hydroxy-5-nitro-benzylidene)-amino]-anthraquinone have been synthesized as fluoride ion sensors. A color change was observed visually (naked-eye) upon addition of fluoride ions in organic solvents to solutions of the receptors.     

Novel separation method for highly sensitive speciation of cancerostatic platinum compounds by HPLC–ICP–MS

A high-performance liquid chromatography–inductively coupled plasma mass spectrometry (HPLC–ICP–MS) method is presented for analysis of cisplatin, monoaquacisplatin, diaquacisplatin, carboplatin, and oxaliplatin in biological and environmental samples. Chromatographic separation was achieved on pentafluorophenylpropyl-functionalized silica gel. For cisplatin, carboplatin, and oxaliplatin limits of detection of 0.09, 0.10, and 0.15 g L^–1, respectively, were calculated at m/z 194, using aqueous standard solutions. (3 L injection volume). The method was utilized for model experiments studying the stability of carboplatin and oxaliplatin at different chloride concentrations simulating wastewater and surface water conditions. It was found that a high fraction of carboplatin is stable in ultrapure water and in solutions containing 1.5 mol L^–1 Cl^–, whereas oxaliplatin degradation was increased by increasing the chloride concentration. In order to support the assessment of oxaliplatin eco-toxicology, the method was tested for speciation of patient urine. The urine sample contained more than 17 different reaction products, which demonstrates the extensive biotransformation of the compound. In a second step of the study the method was successfully evaluated for monitoring cancerostatic platinum compounds in hospital waste water.     

Platination of [3-X-7,8-Ph2-7,8-nido-C2B9H8] (X=Et, F): Synthesis and characterisation of slipped and 1,2→1,7 isomerised products

The reaction of the labelled carborane ligand [3-Et-7,8-Ph₂-7,8-nido-C₂B₉H₈]²⁻ with a source of {Pt(PMe₂Ph)₂}²⁺ affords non-isomerised 1,2-Ph₂-3,3-(PMe₂Ph)₂-6-Et-3,1,2-closo-PtC₂B₉H₈ (1). The analogous reaction between [3-F-7,8-Ph₂-7,8-nido-C₂B₉H₈]²⁻ and {Pt(PMe₂Ph)₂}²⁺ yields 1,8-Ph₂-2,2-(PMe₂Ph)₂-4-F-2,1,8-closo-PtC₂B₉H₈ (3). Compound 1 has a heavily slipped structure (Δ 0.72 Å), which to some degree obviates the need for C atom isomerisation. However, that it is a kinetic product of the reaction is evident from the fact that it reverts to isomerised 1,8-Ph₂-2,2-(PMe₂Ph)₂-4-Et-2,1,8-closo-PtC₂B₉H₈ (2) slowly at room temperature but more rapidly with gentle warming. The heteroatom and labelled-B atom positions in the isomerised compounds 2 and 3 may be explained most simply by the rotation of a CB₂ face of an intermediate based on the structure of 1. Compounds 1–3 were characterised by a combination of spectroscopic and crystallographic techniques.     

Atomic Force Microscopy Study of TiO2 Films Obtained by the Sol-Gel Method

Atomic Force Microscopy (AFM) was used to study the influence of thermal treatments on the structural and textural properties of the sol-gel TiO2 films obtained from Ti(OC3H7i)4. X-ray diffraction (XRD), ellipsometric and porosity measurements have also been made.The TiO2 sol-gel films were homogeneous, transparent and amorphous. Heat treatments in the 400–600°C range indicate that the films have a strong tendency to crystallization. The high initial homogeneity of the TiO2 films was preserved during the crystallization process. AFM shows that the thermally treated films exhibit uniform, monodispersed crystals.     

Copper (II) complexes of sterically hindered o-diphenol derivatives: synthesis, characterization and microbiological studies

Cu (II) complexes with the sterically hindered diphenol derivatives 3,5-di(tert-butyl)-1,2-benzenediol (I), 4,6-di(tert-butyl)-1,2,3-benzenetriol (II) and the sulfur-containing 4,6-di(tert-butyl)-3-(2-hydroxyethylsulfanyl)-1,2-benzenediol (III) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (IV) have been synthesized and characterized by elemental analysis, TG/DTA, FT-IR, ESR, XPS, XPD and conductivity measurements. Compounds I–III can coordinate in their singly deprotonated forms and act as bidentate ligands. These compounds yield Cu (II) complexes of the stoichiometry Cu(L)₂, which have square planar geometry (g_| > g_⊥ > g_e). Unlike them, compound IV behaves as a terdentate ligand, and its complex Cu(L^IV)₂ has distorted octahedral geometry. According to ESR data, only the Cu(L^II)₂ complex contains a very small amount of phenoxyl radicals. Antimicrobial activities of these ligands and their respective Cu (II) complexes have been determined with respect to Gram-positive and Gram-negative bacteria, as well as on yeasts. Their phytotoxic properties against Chlorella vulgaris 157 were also examined.