基于(火积)理论的“+”形高导热构形通道实验研究

基于构形理论和■理论,对"+"形高导热通道的方形构造体开展导热实验研究,并对不同优化目标和不同高导热通道布置形式下的构造体导热性能进行比较.结果表明:对于"+"形高导热通道的方形构造体,实验和数值计算所得到的构造体最高温度点均位于"+"形高导热通道两分支之间,实验和数值计算所得到的构造体平均温差和■耗散率的误差均在可接受范围内,这从定性和定量的角度证明了导热构形优化结果的正确性.与"H"形高导热通道的方形构造体相比,构造体内高导热通道采用一级"+"形布置使得其导热■耗散率得到降低.■耗散率最小的一级"+"形高导热通道构造体最优构形与最大温差最小的构造体最优构形相比,前者的导热■耗散率降低了5.98%,但最大温差提高了3.57%.最大温差最小目标有助于提高构造体的热安全性,■耗散率最小目标有助于提高构造体的整体导热性能.在保证热安全性能的前提下,实际微电子器件设计中可采用■耗散率最小的构造体最优构形以提高其整体导热性能.     

DFT study on the chemical sensitivity of C3N nanotubes toward acetone

Potential application of single-walled C₃N nanotubes was investigated as chemical sensors for acetone molecules based on the density functional theory calculations. It was found that the pristine nanotube weakly adsorbs an acetone molecule with the adsorption energy of − 9.7 kcal/mol, and its electronic properties are not sensitive to this molecule. By replacing a C atom with a Si atom, the nanotube becomes a p-type semiconductor. The adsorption energy of the acetone molecule on the Si-doped nanotube becomes much more negative (E_ad=−67.4 kcal/mol). The adsorption process leads to a sizable increase in the resistance of the Si-doped tube, thereby, it can show the presence of acetone molecule, creating an electronic signal. Also, the sensitivity of these devices can be controlled by the doping level of Si atoms. By increasing the number of dopant atoms from 1 to 4, the sensitivity is gradually increased.     

培养兴趣,引导创新——《信息光学》理论教学改革实践

重点研究了针对《信息光学》理论性强的课程和学生在学习过程中兴趣下降以及一知半解等问题,着重从提高学生理论学习兴趣,引导学生创新为出发点,通过改进PPT课件,吸引学生注意,采用深入浅出、举一反三、师生互动、启发式教学方法、理论与实际相结合、教学科研相结合等多种方法和手段,帮助学生建立正确的物理概念,促进学生对数学公式所代表的物理意义的理解,达到改善理论教学效果的目的。同时结合创新性实验建设,培养创新型和复合型人才。     

氮化铂在高压下的相变及弹性性质的第一原理计算

用PBE形式下的广义梯度近似（GGA）赝势平面波方法研究了氮化铂的结构相变以及弹性性质,计算了氮化铂的氯化钠（B1）、氯化铯（B2）、闪锌矿（B3）、纤维矿（B4）等四种结构并应用高压下的焓与压强的关系,得出在常温常压下B4结构是最稳定的结构,这与Yu 等人得的结果一致,且 B4→B1及B1→B2的相变压强分别发生在36.7 GPa和 185.4 GPa,同时,研究了B4结构在高压的弹性性质,发现弹性常数、体模量、剪切模量、压缩波速、剪切波速以及德拜温度均随着压强的增大而单调增大     

AMT在青铜器文物表面形成缓蚀膜的计算分析

利用密度泛函(DFT)、概念DFT、Electron Localization Function(ELF)和Fukui函数中的亲电反应函数及Multiwfn软件,在B3LYP/6-311+G(d,p)基组水平上研究了5-氨基-2-巯基-1,3,4-噻二唑[AMT(a)]及其同分异构体[AMT(b)]和四面体型配合物i Thiol-Cu-2AMT的几何构型和反应特性.通过计算研究发现,首先AMT(b)与青铜器表面的Cu2+形成平面型配合物i Thiol-Cu后再与AMT(b)相互作用,并最终形成不规则的四面体型i Thiol-Cu-2AMT.在i Thiol-Cu-2AMT中Cu19能与AMT(b)中的亲核性原子有效地结合,形成四面体结构后将Cu19离子保护起来,达到了保护青铜器不受腐蚀的目的;对i Thiol-Cu-2AMT结构中的活性位置分析及ELF拓扑研究后发现,在i Thiol-Cu-2AMT中N6、N15、S26和S35原子又可以与其它的Cu2+相互作用,逐步形成配位型聚合物保护膜[i Thiol-Cu-2AMT]n.     

Numerical study on electrostatic potential distribution of large cylindrical oil tanks

This study carried out a numerical simulation of electrostatic potential distribution in the cylindrical oil tank, focusing on spatial distribution of electrostatic potential and the variation tendency of the potential in the filling operation. Electrostatic potential distribution of stationary oil was illustrated, and the relationship between the electrostatic potential distribution and some parameters of the tank and oil was analyzed as well. Dynamic electrostatic distribution was studied when charged oil is filling into the tank, and ESD prevention measures’ effects on electrostatic potential distribution were simulated. Finally, calculation results of two other types of oil tanks were presented in brief.     

The water‐promoted Diels–Alder reaction in quaternary ammonium salts

Prevailing classification of salts based on their effect in solubility and stability of proteins in aqueous solution predicts that tetraalkylammonium salts, guanidinium chloride (GnCl), LiClO₄ act as salting‐in (S/I) and LiCl, NaCl act as salting‐out (S/O) in aqueous conditions. In the same context the behaviour of GnCl, LiClO₄ and LiCl are contradictory in polar solvents like ethylene glycol and formamide. In these solvents, expected salt effect shows just opposite nature from their usual expectation. However, in the aqueous solution salts like tetraalkylammonium halide (R₄NX, R = alkyl group, X = Br group) behave like salting‐in salts. The physicochemical origin of the salting in effect of R₄NX type of salts has been discussed elaborately in the present work. The role of cations in terms of substitution of various alkyl groups on R₄NX has been systematically presented here on the basis of experimental kinetic and thermodynamic studies. The abnormal behaviour of R₄NX salts in aqueous solution has also been explained by the Setschenov equation (k_s) and Δμ_solvation values, which highlights their individual nature out of common properties of R₄NX. Copyright © 2015 John Wiley & Sons, Ltd.     

Electrical Properties of Carboxyl Methylcellulose/Chitosan Dual-Blend Green Polymer Doped with Ammonium Bromide

This present work discusses dual-blend green polymer electrolyte (GPE)–based natural polymers, composed of carboxyl methylcellulose (CMC) and chitosan (CS), created by introducing various compositions of ammonium bromide (NH₄Br) as a dopant in the system. These GPEs were successfully prepared by the solution casting technique and characterized using electrical impedance spectroscopy (EIS). From EIS measurement, the highest room-temperature conductivity is 1.21 × 10^?5 Scm^?1 for the sample containing 20 wt.% of NH₄Br. Plot of the temperature dependence of the GPEs revealed that the system obeys the Arrhenius rule and was thermally assisted. Besides that, dielectric studies were also conducted and the data were analyzed using complex permittivity, ?^*, and complex electrical modulus, M*, to determine the sample with the highest conductivity value. Thus, this study confirmed non-Debye behavior in the sample.     

HPLC‐MS/MS method for quantitative determination of the novel dual inhibitor of FGF and VEGF receptors E‐3810 in tumor tissues from xenograft mice and human biopsies

We developed and validated a high‐performance liquid chromatography–tandem mass spectrometry analytical method to measure E‐3810, a novel dual inhibitor of fibroblast growth factor receptor 1 and vascular endothelial growth factor receptor 1–3 in tissues and determined the drug concentration in a biopsy of human breast cancer for the first time. The method is a modification of our previous one in plasma to study the clinical pharmacokinetics of the drug during the phase I/II trial. In view of the changes in matrix, we applied a partial validation protocol to determine recovery, sensitivity, range of linearity, precision, accuracy and stability of the method over three runs in a mouse tumor tissue and liver. The recovery of E‐3810 from liver or tumor homogenate was >69%, and the lower limit of quantification was 5 ng/ml. The method was linear in the concentration range 5.0–500.0 ng/ml, as demonstrated by a determination coefficient R² ≥ 0.9955. The range of the calibration curve was appropriate for the analysis, as demonstrated by the accuracy, which was between 91.4% and 106.7%. Interday precision and accuracy on quality control samples at 9, 30 and 300 ng/ml were 3.1‐11.2% and 98.3–111.4%, respectively. The assay was applied successfully to determine the intratumor concentration of E‐3810 in different mouse xenograft tumor models and in a biopsy of a patient with breast cancer included in the phase I/II trial of the drug. In mouse tumors, the concentrations of E‐3810 were higher than necessary to exert antitumor activity in vitro (1 µM). Even more of interest was the result obtained in a human biopsy of few milligrams, where E‐3810 reached 4.9 µg/g (11 µM). Copyright © 2014 John Wiley & Sons, Ltd.     

Conventional and microwave synthesis,spectral, thermal and antimicrobial studies of some transition metal complexes containing 2-amino-5-methylthiazole moiety

Schiff base metal complexes of Cr(III), Co(II), Ni(II) and Cu(II) derived from 5-chlorosalicylidene-2-amino-5-methylthiazole (HL¹) and 2-hydroxy-1-naphthylidene-2-amino-5-methylthiazole (HL²) have been synthesized by conventional as well as microwave methods. These compounds have been characterized by elemental analysis, FT-IR, FAB-mass, molar conductance, electronic spectra, ¹H-NMR, ESR, magnetic susceptibility, thermal, electrical conductivity and XRD analyses. The complexes exhibit coordination number 4 or 6. The complexes are coloured and stable in air. Analytical data reveal that all the complexes exhibit 1:2 (metal:ligand) ratio. IR data show that the ligand coordinates with the metal ions in a bidentate manner through the phenolic oxygen and azomethine nitrogen. FAB-mass and thermal data show degradation pattern of the complexes. The thermal behaviour of metal complexes shows that the hydrated complexes lose water molecules of hydration in the first step; followed by decomposition of ligand molecules in the subsequent steps. XRD patterns indicate crystalline nature for the complexes. The Schiff bases and metal complexes show good activity against the Gram-positive bacteria; Staphylococcus aureus and Gram-negative bacteria; Escherichia coli and fungi Aspergillus niger and Candida albicans. The antimicrobial results also indicate that the metal complexes are better antimicrobial agents as compared to the Schiff bases.