10 GHz可调谐主动锁模光纤环形激光器研究

采用主动锁模技术 ,在光纤环形激光器中实现了脉冲重复率为 10GHz、脉冲宽度为 10ps、线宽为 0 171nm的激光输出 ,波长调谐范围达 37 8nm。实验结果表明 ,主动锁模光纤激光器由于其输出脉冲窄、脉冲啁啾小、波长调谐方便及与光纤系统兼容等优点 ,有望成为未来超高速光通信系统中的理想光源。     

黎开管热声振荡的主动控制研究

本文以黎开管内的热声耦合振荡为研究对象,设计基于主动补偿的适应性控制器抑制黎开管内的不稳定燃烧。试验以扬声器为执行机构来改变黎开管的边界条件,从而抑制黎开管内的热声耦合振荡。实时控制效果表明,本文所采用的适应性控制算法能够有效抑制因热声耦合产生的燃烧振荡,为实际动力系统燃烧振荡抑制提供了思路。     

基于有源广义忆阻的无感混沌电路研究

采用常见元器件等效实现一个广义忆阻器, 进而制作出一个电路特性可靠的非线性电路, 有助于忆阻混沌电路的非线性现象的实验展示及其所产生的混沌信号的实际工程应用. 基于忆阻二极管桥电路, 构建了一种无接地限制的、易物理实现的一阶有源广义忆阻模拟器; 由该模拟器并联电容后与RC桥式振荡器线性耦合, 实现了一种无电感元件的忆阻混沌电路; 建立了无感忆阻混沌电路的动力学模型, 开展了相应的耗散性、平衡点、稳定性和动力学行为等分析. 结果表明, 无感忆阻混沌电路在相空间中存在分布2个不稳定非零鞍焦的耗散区和包含1个不稳定原点鞍点的非耗散区; 当元件参数改变时, 无感忆阻混沌电路有着共存分岔模式和共存吸引子等非线性行为. 研制了实验电路, 该电路结构简单、易实际制作, 实验测量和数值仿真两者结果一致, 验证了理论分析的有效性.     

Synchronization and coherent combining of two pulsed fiber lasers

We demonstrate a scalable architecture for coherent combining of pulsed fiber lasers.A new method for generating synchronous pulsed fiber lasers by direct phase modulation is proposed and investigated.It is shown that phase modulated mutually coupled laser array can be a steady synchronous pulsed fiber laser source.The synchronous pulsed fiber lasers are coherently combined with an invariable phase difference of π in adjacent lasers.Neither active phase control nor polarization control is taken in our experiment.     

对数似然图像分割的快速主动轮廓跟踪算法

针对跟踪目标尺度变化问题,提出了基于灰度对数似然图像分割的快速主动轮廓跟踪算法。改进的主动轮廓跟踪算法将根据以目标与背景的颜色差异而建立的对数似然图对图像进行阈值分割和数学形态学处理,再将Kalman滤波器结合到主动轮廓跟踪算法进行目标跟踪。改进的主动轮廓跟踪算法对目标分割准确,轮廓特征显著,跟踪效果稳定,算法能很好地适应跟踪目标尺度变化。通过Kalman滤波器对目标位置点的预测减少了主动轮廓跟踪算法收敛的迭代次数,使算法的运算效率提高了33%左右。     

ELECTRON TRANSPORT BEHAVIOURS IN THE NITROGEN DIRECT CURRENT GLOW DISCHARGE

A Monte Carlo simulation is presented to describe the electron transport behaviours in the nitrogen direct current glow discharge. The energy and angular distributions of the electrons at different positions of the cathode dark space are calculated; their energy and density distribution features throughout the entire discharge are discussed. The influence of molecular vibrational excitation, typical for electron－molecule collisions, has been studied and the elementary process of active species generation has been illustrated. The simulated results reveal that, in the cathode dark space, the high-energy electrons are mainly forward scattering and behave as a high-energy ‘electron beam'. The sharp increase of the number of secondary electrons plays an important role in producing active species at the interface between the cathode dark space and the negative glow region. The vibrational excitation enhances the energy loss of electrons in the negative glow region.     

Nanoporous silicon flakes as anode active material for lithium-ion batteries

Nanoporous-silicon (np-Si) flakes were prepared using a combination of an electrochemical etching process and an ultra-sonication treatment and the electrochemical properties were studied as an anode active material for rechargeable lithium-ion batteries (LIBs). This fabrication method is a simple, reproducible, and cost effective way to make high-performance Si-based anode active materials in LIBs. The anode based on np-Si flakes exhibited a higher performances (lower capacity fade rate, stability and excellent rate capability at high C-rate) than the anode based on Si nanowires. The excellent performance of the np-Si flake anode was attributed to the hollowness (nanoporous structure) of the anode active material, which allowed it to accommodate a large volume change during cycling.     

基于梯度矢量流和主动轮廓模型的海陆边界提取

利用边缘检测与主动轮廓模型组合的方法可提取海陆边界线,但易受轮廓跟踪的缺点影响.在该方法的基础上,利用边缘检测与梯度矢量流的有向力作用生成初始轮廓线,再使用主动轮廓模型对初始轮廓线进行调整,得到精确的海陆边界.实验证明该方法可简便地生成有效的初始轮廓线并准确提取海陆边界,避免使用轮廓跟踪法.该方法可利用GIS数据辅助以简化提取流程.     

考虑时滞的框架结构控制可靠性研究

提出了一种适合于确定框架结构可靠性计算方法．利用模态变换,把系统变为模态独立的振动方程,根据Field提出的假设,先定义阈值,假设控制后系统响应对阚值的穿阚率服从泊松分布,然后根据各模态的控制结果确定相应的可靠性．最后根据Veneziano提出的方法给出系统的可靠性。本文提出针对框架重点部位的控制输出来确定系统可靠性概念。考虑到实际情况,在控制方法选择针对系统不确定性具有较好控制效果的广义预测控制并考虑时滞影响。本文最后给出了计算实例。     

Non-stoichiometry and magneto-optic properties of magnetic bubble thin films of TmIG substituted with bismuth and gallium

Thulium iron garnet thin films substituted with bismuth and gallium were prepared by LPE from a PbO.B₂O₃ flux. Radioactive isotope tracers were added to the melt as the chemical analysis technique. The deviation from the ratio (Pb+Bi+Tm)/(Fe+Ga)=0.6 of the layers was large and a proportion of the thulium ions possibly lie on the octahedral crystallographic sites. The concentration of Bi, Pb, and Ga as a function of the growth temperature was studied. The magneto-optic properties show that the layers are well suited for use in a magneto-optic device. A figure of merit of 2.5 degree per decibel at λ=560 nm was obtained and some magnetic bubble parameters are also presented.