染料掺杂聚合物电注入发光材料的激发态稳定性

染料掺杂聚合物电注入发光材料的激发态稳定性田文晶,马於光,吴英,薛善华,刘式墉,沈家骢（吉林大学分子光谱与分子结构开放实验室、集成光电子学国家重点联合实验室,长春,１３００２３）关键词染料掺杂聚合物,电注入发光,荧光光谱,ＵＶ－Ｖｉｓ吸收谱自英国剑桥...     

光致变色冠醚部花菁染料的合成及其逆光致变色性

作者用含冠醚结构单元的2-甲基-苯并噻唑季铵盐与取代水物醛缩合得到了五个光致变色冠醚部化菁化合物。这些新的冠醚化合物具有逆光致变色性质, 较稳定的结构是开环部花菁式。     

一种近红外花菁染料的合成及其应用于生物大分子的测定

光谱性质;蛋白质;核酸测定;一种近红外花菁染料的合成及其应用于生物大分子的测定     

一种新型磺酸修饰的共价有机框架用于二氧化碳吸收和染料吸附

环境污染是地球现今的重要问题之一,而其中就包括水污染与温室效应.共价有机框架(covalent organic frame-works,COFs)作为一种新兴的晶态多孔聚合物,因其优异的吸附性能,在污染治理领域具有广阔的应用前景.本工作报道了一种基于β-酮胺单体通过迈克尔加成-消除反应合成的磺酸型微孔COF (JUC-...     

Porous multicomponent chitosan/poly(ε-caprolactone)-block poly (ethylene glycol)/SiO2 aerogel@polydopamine membrane for Congo red adsorption

A composite adsorbent, chitosan//poly (ε-caprolactone)-block poly (ethylene glycol)/SiO₂ aerogel@polydopamine (CS/PCL-b-PEG/SA@PDA) membrane was prepared for the adsorption of organic dyes. The matrix polymer materials of this novel adsorbent were eco-friendly. SiO₂ aerogel with nanoporous network construction was fixed in the multicomponent polymer fibers through simultaneous electrospinning-electrospray technology followed by modification of polydopamine (PDA). The composite adsorbent had a maximum adsorption capacity of 598.8 mg/g for Congo red (CR) and possessed good reusability performance. This adsorbent showed excellent performance for the selective adsorption of relatively large molecule CR dyes even under high concentration of small molecule methyl orange (MO) dyes or 1 M of salt solution. The adsorption mechanism indicated that the –NH₂ and –OH groups in adsorbent could generate the stronger electrostatic attraction with the –SO₃^- groups in CR. Meanwhile, the sufficient adsorption spaces of the adsorbent were constructed by the porous network structure of SiO₂ aerogel, the accumulation of PDA particles and the porous structure of the multicomponent composite membrane. The work provided a proactive study in designing an adsorbent for the selective adsorption of organic dyes.     

一系列基于混合配体策略构筑的金属有机骨架的合成、结构及性质

通过简单高效的醛酮缩合反应,合成了碱性配体2,6-二（4-吡啶基亚甲基）环己酮（BPCH）,采用3种芳香羧酸配体：对苯二甲酸（H₂TP）、间苯二甲酸（H₂IP）和均苯三甲酸（H₃TMA）,以混合配体策略制备了7例金属有机骨架（MOFs）。用单晶X射线衍射、红外光谱、粉末X射线衍射和热重分析对其进行表征并分析其拓扑结构。MOFs1、2、3均呈现为多样的三维结构,MOFs4~7表现为同构的二维结构。荧光测试结果显示该类化合物对Fe³⁺有较好的荧光猝灭效应,同时对于染料具有一定的吸附能力。     

方酸菁荧光探针的应用研究进展

功能性方酸菁染料具有独特的D-A-D共轭结构,其在可见光和近红外区域有强烈的吸收和荧光发射。方酸菁染料作为近红外荧光探针母体被应用于蛋白质、氨基酸、一些生物小分子、环境污染物及金属离子等的检测。本文结合课题组近几年工作综述了方酸菁染料在蛋白质、氨基酸、生物小分子、阳离子和其它物质检测方面的应用。     

Multi‐responses Methodology Applied in the Electroanalytical Determination of Hair Dye by Using Printed Carbon Electrode Modified with Graphene

This paper describes a rapid and sensitive method for determination of the hair dye Basic Blue 41 in wastewater samples using screen‐printed carbon electrodes modified with graphene (SPCE/Gr). The method is based on the reversible reduction of azo groups of the dye at potential of ?0.23 V/?0.26 V, where both the anodic and cathodic currents increased 1,300 % when compared to screen‐printed carbon (SPCE) and glassy carbon electrodes (GCE). The optimization of a square wave voltammetric method was performed by means of 2³ factorial design, Doehlert matrix and multi‐response assays, and the best parameters were: frequency (54.8 Hz), step potential (6 mV), pulse amplitude (43.7 mV) and pH 4.5. The analytical curve was constructed from 3.00×10^?8 to 2.01×10^?6 mol L^?1, with detection and quantification limits of 5.00×10^?9 and 1.70×10^?8 mol L^?1, respectively. The repeatability of the method evaluated for 10 consecutive measurements at concentrations of 1.70×10^?7 mol L^?1 and 1.70×10^?6 mol L^?1, showed relative standard deviation of 3.56 and 0.57 %, respectively. The sensor based in SPCE/Gr was successfully applied in wastewater samples collected from a drinking water treatment plant and validated by comparison with HPLC‐DAD method with good accuracy.     

表面键联型TiO2/SiO2固定化催化剂的结构及催化性能

 采用浸渍法制备了表面键联型TiO2／SiO2固定化光催化剂．XRD\r\n,FT－IR,XPS和BET比表面积测定结果表明,TiO2通过Ti－O－Si联结\r\n负载于多孔硅胶的表面,由此提出TiO2／SiO2的结构模型．考察了多孔\r\n硅胶的粒度及氧化钛负载量对催化剂活性的影响．对活性艳红K－2G（\r\nR15）的光催化脱色反应,最佳的光催化剂30％TiO2／SiO2（Ims30）比\r\nB－TiO2粉末的催化速率快3倍．随着载体粒度的减小,催化剂的比表面\r\n积增大,催化活性升高;多孔硅胶不仅起着支持体的作用,而且具有分\r\n散的作用;多孔硅胶具有很好的透光性．经ξ－电位测定,所制备催化\r\n剂的等电点为3．0pH单位,表明催化剂表面呈酸性．     

用于监控过氧化氮的近红外荧光探针的光物理性质及PET机理

含有机硒的七甲川菁染料是基于光诱导电子转移(PET)的近红外(IR)荧光探针, 能在生理条件下高灵敏、高选择性地监控过氧化氮. 本文应用含时密度泛函理论(TD-DFT)计算方法研究其光物理性质和PET机理.结果表明, 在激发态, 荧光母体发生最高占有分子轨道(HOMO)到最低非占有分子轨道(LUMO)的电子跃迁, 识别基团上的HOMO轨道能级提高到荧光母体的单电子占据的HOMO轨道能级之上, 并向其转移一个电子, 使激发态电子回落过程受阻而导致荧光部分淬灭. 硒被氧化后, 识别基团上的HOMO轨道能级降低, PET过程被阻断, 荧光发射恢复. 研究进一步证明, PET效应来自于识别基团上苯胺N原子的p电子, 它的电子转移能力受到其对位苯硒基的氧化-还原状态的影响, 产生了荧光信号的“开-关”作用.