Synthesis,Characterization and Properties of a Novel Environmentally Friendly Mono Azo Disperse Dye and Its Application on Polyethylene Terephthalate (PET)

The aim of this research is to achieve the synthesis of a novel mono azo disperse dye containing both a β‐naphthyl acetate group and carboxylic acid ester group and application on PET fabric. In this study the dyeing properties have also been investigated. The synthesized dye was characterized using UV‐Vis, FTIR, ¹H NMR and ¹³C NMR spectroscopic techniques. To investigate alkali‐clearability, both alkali‐hydrolysis behavior and the effect of its fastness properties with regard to PET fabric were examined. This dye showed a reasonable level of hydrolysis under relatively mild alkaline conditions. The application of the dye to PET fabric showed good leveling and building up properties. Estimating fastness properties of the dyed fabric showed excellent wash, rubbing fastness, good light and sublimation fastness. The results furthermore displayed that the synthesized dye offers the option of alkali‐clearing process over that of a conventional reduction‐clearing process. Therefore, the value of Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) and water pollution as well as the expenditure of production were decreased.     

The electronic structures and charge transfer properties of tetra(naphthalene‐dione)porphyrins and tetra(naphthalene‐dithione)porphyrins as dye‐sensitized solar cell skeleton

The p‐π conjugation of tetra(naphthalene‐dione)porphyrins and tetra(naphthalene‐dithione)porphyrins is clarified on the basis of density functional theory studies. When carbonyl/thionyl is introduced, π bonds on the molecular skeleton become strong–weak alternated, and the conjugation transforms from “benzene‐type” to “butadiene‐type.” The unidirectional photon‐induced current associated with the p‐π conjugation enables the light‐harvesting efficiency of this kind of molecular skeleton reaches 90% in the range of 300–800 nm. Therefore, these compounds are ideal alternative for panchromatic dye‐sensitized solar cells. © 2013 Wiley Periodicals, Inc.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

Fast polarisation-insensitive optical shutter supported by backflow in dichroic dye-doped dual-frequency liquid crystal

This paper describes a novel implementation of a dual-frequency liquid crystal optical shutter of the guest–host type. The transmissive state of the filter is obtained by applying a low-frequency electric field that brings the dichroic dye in a homeotropic orientation. The light-absorbing state is realised by a twisted planar configuration for which the absorption is quasi-independent of the polarisation. Switching between the two states occurs in about 1 ms and the devices show no scattering for wavelengths inside or outside the absorption band of the dichroic dye. Simulations and experiments reveal how a twisted state is obtained through the backflow phenomenon.     

Effects on molecular orientation and phase transition of addition of carbon nanotubes into liquid crystalline matrix

For practical guest–host applications, it is important to choose dyes with a high ability of orientation in the liquid crystal (LC) matrix. In this experimental work, two different azo-structured dyes (disperse yellow 3 and 7) were separately doped to each of two different nematic LCs (E7 and ZLI-1132). Their solubilities, textures, phase transition temperatures and order parameters were determined. At the second stage, single-walled carbon nanotubes (SWCNTs) in a small amount were separately added to each of these solutions, and the experiments were repeated as similar to the previous ones. The solubilities of dyes in the LC E7 were lower than those of ZLI-1132. Moreover, the highest order parameter value was attained with yellow 7 dye in ZLI-1132 nematic host. Co-use of nanoparticles (CNTs) as dopant resulted in notable increases in order parameters. These dyes and CNTs did not significantly destabilise the mesomorphic phase of nematic hosts. An appreciable change in textures was not monitored with addition of dopant(s). In addition, it was observed that the narrowing on the temperature range of the LC did not take place with the addition of dopants to the crystal; on the contrary, an increase was recorded.     

Elementary Photoelectronic Processes at a Porphyrin Dye/Single‐Walled TiO2 Nanotube Hetero‐interface in Dye‐Sensitized Solar Cells: A First‐Principles Study

A unique one‐dimensional (1D) sandwich single‐walled TiO₂ nanotube (STNT) is proposed as a photoanode nanomaterial with perfect morphology and large specific surface area. We have thoroughly examined the elementary photoelectronic processes occurring at the porphyrin dye/STNT hetero‐interface in dye‐sensitized solar cells (DSSCs) by theoretical simulation. It is desirable to investigate the interfacial photoelectronic processes to elucidate the electron transfer and transport mechanism in 1D STNT‐based DSSCs. We have found that the photoexcitation and interfacial charge separation mechanism can be described as follows. A ground‐state electron of the dye molecule (localized around the electron donor) is first promoted to the excited state (distributed electron donor), and then undergoes ultrafast injection into the conduction band of the STNT, leaving a hole around the oxidized dye. Significantly, the injected electron in the conduction band is transported along the STNT by means of Ti 3d orbitals, offering a unidirectional electron pathway toward the electrode for massive collection without the observation of trap states. Our study not only provides theoretical guidelines for the modification of TiO₂ nanotubes as a photoanode material, but also opens a new perspective for the development of a novel class of TiO₂ nanotubes with high power‐generation efficiency.     

一例水溶液中识别铜离子的染料探针

通过罗丹明B与乙二胺反应生成的中间体合成了一例可以对铜离子进行比色检测的探针R-Cu.R-Cu可以实现对在HEPES(5 mmol/L;pH 7.4)溶液中Cu2+的比色可视化识别,加入Cu2+后,R-Cu的吸收明显增强,呈现出罗丹明B的紫红色.探针对Cu2+具有较高的选择性和灵敏性,对其他常见的金属离子具有较强的抗干扰能力.该探针可以在较宽的特别是近中性pH环境下有效检测Cu2+,最低检出限为2.70×10?7 mol/L.     

Anaerobic biological treatment of dye bearing water in anaerobic sequencing batch reactor: Performance and kinetics studies

Textile and dye industries are main sources of dye bearing effluent. In present studies the anaerobic biological degradation of Acid Red 3BN dye water (AR3BNDW) and mixed dye water (MDW) for reduction of color and COD were studied in sequential batch reactor (SBR). The sludge as sources of microorganism was arranged from maize processing bio methanation wastewater treatment plant, which was acclimatized for treatment of AR3BNDW and MDW. After the acclimatization, dyes degradation were studied in SBR At optimum operation condition of hydraulics retention time (HRT) = 2.5 d, and treatment time (t_R) = 16 h, AR3BNDW have gone maximum 87% color reduction of 500 mg/L dye, and 82.8% COD reduction of 380 mg/L COD. At same operating condition, 84.5% color reduction of 500 mg/L dye, and 79.42% COD reduction of 413 mg/L COD achieved for MDW. The second order Grau model was fitted well for COD and dye reductions. The kinetics parameter were evaluated for both the dye water.     

Adamantyl Side Chains as Anti-Aggregating Moieties in Dyes for Dye-Sensitized Solar Cells

Designing and evaluating novel dye concepts is crucial for the development of the field of dye-sensitized solar cells (DSSCs). In our recent report, the novel concept of tethering the anti-aggregation additive chenodeoxycholic acid (CDCA) to dyes for DSSC was introduced. Based on the performance improvements seen for this modification, the aim of this study is to see if a simplified anti-aggregation unit could achieve similar results. The following study reports the synthesis and photovoltaic characterization of two novel dyes decorated with the steric ethyladamantyl moiety on the π-spacer, and on the triarylamine donor. This modification is demonstrated to be successful in increasing the photovoltages in devices employing copper-based electrolytes compared to the non-modified reference dye. The best photovoltaic performance is achieved by a device prepared with the adamantyl decorated donor dye and CDCA, this device achieves a power conversion efficiency of 6.1 % (Short-circuit current=8.3 mA cm⁻², Open-circuit voltage=1054 mV, Fill factor=0.69). The improved photovoltaic performance seen for the adamantyl decorated donor demonstrate the potential of ethyladamantyl side chains as a tool to ensure surface protection of TiO₂.